24PFL5007/V7 32PFL5007/V7
Contents 1 Notice 2 7 Product information 17 Supported display resolutions 17 2 Important 3 3 5 USB 17 Tuner/Reception/Transmission 17 Antenna and External Equipment connection 4 Use your TV 7 Remote control 17 Power 17 Supported TV mounts 18 Product Specification 18 4.1 Name and Function of Control on Set 7 4.2 Name and Function of Control on Remote 8 4.3 Battery Installation 11 5 11 Use more of your TV 5.1 Access TV menus 11 5.2 Picture Menu 12 5.3 Sound Menu 12 5.
1 Notice Pixel characteristics Warranty This LCD/LED product has a high number of colour pixels. Although it has effective pixels of 99.999% or more, black dots or bright points of light (red, green or blue) may appear constantly on the screen. This is a structural property of the display (within common industry standards) and is not a malfunction. No components are user serviceable. Do not open or remove covers to the inside of the product.
2 Important Read and understand all instructions before you use your TV. If damage is caused by failure to follow instructions, the warranty does not apply. Safety Risk of electric shock or fire ! Never expose the TV to rain or water. Never place liquid containers, such as vases, near the TV. If liquids are spilt on or into the TV, disconnect the TV from the power outlet immediately. Contact Philips Consumer Care to have the TV checked before use. .
When you disconnect the power cord, always pull the plug, never the cable. Disconnect the TV from the power outlet and antenna before lightning storms. During lightning storms, never touch any part of the TV, power cord or antenna cable. Risk of hearing damage! Avoid using earphones or headphones at high volumes or for prolonged periods of time.
3 Antenna and External Equipment Connection ent such as VCR,DVD player ANT IN RF AV OUT 1. The aerial cable should not be bundled to the power cord. RF AV OUT L1 YPbPr1 AV1 R1 Av1 COMPONENT (YCbCr/YPbPr) DVD INPUT 1. Connect the component outputs (YCbCr / YPbPr) of DVD player to the component (YPbPr) input of the the TV. 2. Connect audio outputs (L,R) of a DVD player to the audio input (YPbPr) respectively. 3. Press the PLAY button on the DVD player. VIDEO INPUT RF 1.
3. Switch on the PC and PC screen appears on the set. The set can be operated as PC monitor. HDMI HDMI socket (HDMI1,HDMI2,HDMI3) on the TV. USB HDMI USB Connect / Insert standard USB and select USB source on source OSD by pressing SOURCE key. Press OK / Right key on remote, connected USB is Listed, press OK to enter in selected USB . Similarly front panel keys CH+/- and VOL+ can be operated as Up/Down and OK/Right keys on remote respectively.
4 Use your TV 4.1 Name and Function of Control on Set A) Front Panel Control/Keys (Optional) 3 9 8 7 4 6 5 1 : Switch Channels. : Adjust Volume. : standby indicator and remote controller sensor. : Access the home menu. 2 : Source Selection and Submenu entry. : Switch the TV on or off.
4.2 Name and Function of Control on Remote INCR.SURR TELETEXT SOURCE SCENEA DUAL I/II SLEEP TV DEMO FREEZE EXIT OK A/CH INFO BACK USB CH FORMAT 1 2 3 4 5 6 7 8 9 0 SOUND PICTURE NOTE : This is for representation actual remote may differ.
POWER Turns TV into STANDBY ON / OFF mode. INFO MUTE SOURCE SLEEP INFO 1) Displays present source information with details of input signal connected. 2) In USB mode this key is use to display elasped or remaining time for audio & to display info bar for images 3) Energy meter will be displayed by pressing this key.(Not applicable for USB mode.) MUTE Turns sound OFF or ON. SOURCE Press SOURCE key on remote or key on front panel keypad.
FR (FAST REVERSE) FR key is used for backward the playing track / item by the speed of (X2, X4, X8, X16,X32) Press this key to change picture switch interval in USB Mode. FF FR FF (FAST FORWARD) FF key is used for forward the playing track / item by the speed of (X2, X4, X8, X16,X32) Press this key to change picture switch interval in USB Mode. Note : In thumbnail mode for images and channel edit menu use FR & FF keys to view previous & next page.
4.3 Battery Installation 5 Use more of your TV 5.1 Access TV menus 1 Press Menu then menu screen appears. 2 Select one of the following then press OK. [Watch TV]: If a source other than TV is selected,switch back to the TV source. [Browse USB]: View photos and play music contained in USB storage devices. [Device List]: Access menus to change other source by pressing key. [Setup]: Access menus to change picture,sound and other settings.
5.2 Picture Menu This function is used to select the presetted picture settings’ Smart Picture Picture (Personal,Cinema,Sports,Vivid,Bright) Contrast Brightness Color Sharpness Hue These settings are used to adjust the Contrast ,Brightness,Color, Sharpness , and Hue values for fine adjustments of the picture. NOTE : Hue is enabled for NTSC channels only.
Time On Timer Display the On time, press Ok key to enter and adjust the time (HH:MM) format Time Channel No. Activate Select Activate - On ,set time(HH:MM) Channel no.(1-200) on given time set will be released from standby and entered channel will be displayed as on channel. Select Activate - ON/OFF Clear All Select this option to reset all Timer options except Child Lock Switch Make the child lock switch On to lock the source/channel Note: Setup menu is disabled when Child Lock switch is On.
Note : 1) Timer will get reset if mains powered On/Off. 2) Use Left/Right keys on the remote change the option and up/down to navigate. 3) Press OK/Right key on remote to enter into the submenu. 4) Press Ch +/- or Vol +/- key on front panel to navigate, Source key to enter into sub menu and to return back by vol5) Default password is 0000 for child lock and hotel mode.
5.5 Installation Menu Channel No.
6 Troubleshooting video input signal is Make Sure COLOUR and CONTRAST setting are correct. Auto Adjust Horizontal/Vertical position. Manually try to adjust horizontal /vertical position. Auto Adjust, try to adjust clock manually.
7 Product USB information Supported USB storage device: (Only FAT 16 or FAT 32 USB storage devices are supported) Product information is subject to change without notice. For detailed product information, go to www.philips.com/support. Supported storage file formats: Images: JPEG Audio : MP3 Note Supported display resolutions 1) Multimedia file names must not exceed 128 characters.
Supported TV mounts To mount the TV, purchase a Philips TV mount or a VESA-compatible TV mount. To prevent damage to cables and connectors, be sure to leave a clearance of at least 2.2 inches or 5.5cm from the back of the TV. TV screen size (inches) Required pitch (mm) Required mounting bolts 32PFL5007/V7 24PFL5007/V7 200x200 100x100 4 x M5 4 x M5 Product specifi cation Design and specifications are subject to change without notice.
Consumer Guidelines 1. Kindly ensure that the dealer fills out the Warranty card correctly. 2. To avail the Warranty please register your product with the PhilipsLog on to www.Philips.com OR Contact Philips Consumer Care Centre 3. In the unlikely event of a defect developing in the TV set contact the Philips Customer Care Centre for obtaining warranty service and inform of the defect observed in the set, the type no. and serial no. of the set. 4.
WARRANTY This TV receiver is covered under warranty against any defect arising out of faulty or defective material or workman ship for a period of 12 months from the date of purchase. Should a defect develop in this set during the period of warranty,PE Electronics Limited undertakes to get the set repaired free of charge either From whom the set has been purchased or through an Authorised Service Center for warranty service.
LCD TV 24/32” (1100085138) Rev.
