Quick start guide

ProntoProEdit 3.0 - User Manual Configuring a CCF
Philips Page 65 of 76
Designing Frames and Buttons
Adding bitmaps to a frame
1 Open the Frame Properties.
2 Select the Icons tab.
When you selected a default frame, No Icon is displayed in the Icon
group box.
When you selected a frame with a bitmap, the bitmap is displayed in the
Icon group box.
3 Right-click in the Icon group box and select Load from the context
menu.
-or-
Double-click in the Icon group box.
The ‘Open’ window appears.
4 Browse to the folder where the bitmaps are stored and select a new
bitmap.
5 Click OK.
The selected bitmap is displayed in the Icon group box.
6 Right-click the button and select Save from the context menu to save
the bitmap.
7 Click OK to accept the properties.
-or-
Click Cancel to return without changing the properties.
Adding bitmaps to a button
1 Open the Button Properties.
2 Select the Icons tab.
When you selected a default button, No Icon is displayed in the
Inactive icons and the Active icons group boxes.
When you selected a button with a bitmap, the bitmaps are displayed in
the Inactive icons and the Active icons group boxes.
3 Right-click in the group box for the Inactive-Unselected state and
select Load from the context menu.
-or-
Double-click in the Icon group box.
The ‘Open’ window appears.
4 Browse to the folder where the bitmaps are stored and select a new
bitmap.
5 Click OK.
The selected bitmap is displayed in the group box for the Unselected –
Inactive state.
6 Right-click the button and select Save from the context menu to save
the bitmap.
7 Repeat the instructions 3 to 6 for the other states:
 Unselected– Active
 Selected– Inactive
 Selected– Active
8 Click OK to accept the properties.
-or-
Click Cancel to return without changing the properties.