Return your Warranty Registration card today to ensure you receive all the benefits you're entitled to. Once your PHILIPS MAGNATE purchase is registered, you're eligible to receive all the privileges of owning a PHILIPS MAGNATE product. So complete and return the Warranty Registration Card enclosed with your purchase at once. And take advantage of these important benefits. \ Congratulations on your purchase, o o and welcome to the “family!” PHILIPS Dear PHILIPS MAGNATE product owner: Thank you for your conf
SAFETY INSTRUCTIONS Read before operating equipment This product was designed and manufactured to meet strict quality and safety standards. There are, however, some installation and operation precautions which you should be particularly aware of. 1. Read instructions All the safety and operating instructions should be read before the appliance is operated chieftain Instructions The safety and operating instructions should be retained for future reference. 3.
Introduction ‘Welcome/Registration of Your TV Safety/Precautions Table of Contents. D On-Screen (MENKENT) Features % Setting the TV for Cable TV Operation < Adding Channels in Memory (Manually) < How to Set the TV for Closed Captioning .. <-Setting the TV for Sterno .
OTE: if you went through Setup (in your Quick Use Guide), this arks has already been completed for you. You need to make sure that the TV is set 1o pick up ether Cable TV stations or Antenna signals. In other words, the TV needs 1o know whether you have connected a Cable TV signal or a normal antenna 1o its ANTENNA plug. <> Press the MENU (M) button on the remote, then press the CHANNEL A or ¥ buttons 1o select the word CABLE with the TV’s on-screen row.
ADDING CHANNELS IN MEMORY (MANUAL uto Programming (see page 2 of the Quick Use Guide) adds all the channels it can find (on your Antenna or Cable TV system) into the TV's memory. Add/Delete Channels makes it easy for yon to add other channels, or drop unwanted channels, from the list of channels in the TV's memory. <> Press the MENU (M) button on the remote, then press the CHANNEL 4 or ¥ buttons to select the word CHANNEL with the TV’s on-screen arrow.
How 10 ¢ Clapped Captioning allows you 10 read the voice content of television programs on the TV screen, Designed o help the hearing impaired this feature uses on-screen “text boxes” to show dialogue and conversations while the TV program Is in progress. @geed Press the MENU (M) button on the remote, then press the CHANNEL select the word CAPTION with the TV’s on Screen a Tow, <2> Press the button to select the desired Closed Caption (CC) mode For Example: CAPTION 1.
our TV can receive broadcast stair TV programs. The TV has both an amplifier and win speakers through which the stern sound can be heard. <> Press the MENU (M) button on the remote, then press the CHANNEL A or ¥ bunions to select the word STEREO with the TV’s on-screen arrow. @ Press the button to turn the | STEREO MODE ON.
"Hst” or series of previously Viewed channels can be selected with the SURF bunion on your remote control. With this feature you can easily switch between different TV programs that currently interest you. The Surf control allows you 1o set up to 8 channels in its quick viewing “list”, Press the MENU (M) button on the remote, then press the CHANNEL A or ¥ batons to select the word SURF with the TV’s on-screen row. @ Press the button 10 select either ALT. CHN. (Alternate Channel) or SURF.
To adjust your TV picture controls, select a channel and follow the steps shown below: Press the MENU (M) button on the remote, then press the CHANNEL A or ¥ buttons until the desired control shows on-screen. Press the and buttons © adjust the selected color control. @ Press the STATUS button to clear the screen when picture adjustments are completed. Press dankest parts of the vicars are as bright 25 you prefer.
o can view the playback of VCR rapes (Video Disc Players, camcorders, etc). by using the AUDIT and VIDEO INPUT jacks (on the rear of the V) For example: w view the playback of a VCR tape: <> Connect the VIDEO and AUDIO IN(put) jacks on the TV to the AUDIO and VIDEO OUT(put) jacks on the VCR. Press the MENU (M) button on the remote, then press the CHANNEL A or ¥ buttons 1 select the word INPUT with the TV’s on-screen arrow.
Wherewithal watching a movie or a video game your TV has automatic video control settings massed for Your current program Source or consent. The Smart Picture feature quickly resets your TV's video controls for a number of different pyres of programs and viewing conditions you may have in your home. Each Smart Picture setting is preset at the factory to automatically adjust the TV's Picture, Color, and Sharpness viewing control levels.
our remote control is set to work your TV and many infrared remote (IR} control Vicars. However, an easy onetime step may be necessary before the remote will work your VCR. Try this initial check 10 see if going on 1o the following section is necessary. @ Press the VCR System but] ton on the remote. <2> Point remote toward VCR [ and press the POWER button. @ Does the remote turn the VCR ON? IF YES, @ and try the other VCR buttons on the remote.
Naw that you have looked up the two-digit Remote Code Number for your brand of VCR {on previous page), you are ready ro follow the four simple steps below. Please read through steps 1-4 before beginning. @ Press and release the STATUS button. <2> Within thirty seconds after releasing the STATUS button, press and release the VCR System button. within thirty seconds after releasing the VCR System button, ENTER THE TWO DIGIT CODE NUMBER for the desired VCR.
I our remote control is set 1o work your TV and many infrared remote (IR} control Cable Converters. However an easy one-time step may be necessary before the remote will work your Converter. Try this initial check 1o see if Cable going on to the following section Converter is necessary. . Press the CBL System button on the remote. <2> Point remote toward Cable Converter and press the POWER button. Does the remote turn the Converter ON? IF YES, © andiron the CH & ¥ and CH number buttons on the remote.
fow that you have looked up the two-digit Re more Code Number for your brand of Cable Converter {on previous page), you are ready to follow the four simple steps below. Please read through steps 1-4 before beginning. Press and release the STATUS Cable Converter button. l @ Within thirty seconds after releasing the STATUS button, press and release the CBL System button, Within thirty seconds after releasing the CBL System button, ENTER THE TWO DIGIT CODE NUMBER for the desired Converter.
OTE TO ¥V our TV remote can be set 10 work your VCR or Cable Converter by what is called the SEARCH method. If the "REMOTE CODE” number method shown in the previous section did not set your remote 1o work your VCR or Converter, then Hollow the easy steps listed below. Please read through steps 1-4 before beginning. @ Press the POWER button on the VCR or Converter to turn the unit ON. <2> Stand at East six feet away from the front of the VCR or Converter. Point the remote toward the unit.
en using the TV remote with a VCR, first make certain it is set to control your VCR (by the REMOTE CODE or SEARCH method see earlier secretion. (BEGIN) @ Press the VCR System button on the remote. @ Point the top of the remote toward the front of the VCR (remote sensor window) when pressing buttons. @ Record Buttons Hold the STATUS bum on down, and then press the PLAY button to begin 2 VCR recording. Rewind Button Press 10 rewind tapes. For some VCR you may need to press SOFT button first then REWIND.
Pulsate make these simple checks before calling for service. These tips can save you time and money since charges for TV installation and adjustment of customer controls are not covered under your warranty. No Power No Picture No Sound Remote Does Not Work TV Di s Wren, Channel or No Channels Above 13 i are CAUTION: A video source (such as a video game, Compact Disc Interactive CDI, or TV information channel) which shows a constant non-moving pattern on the TV screen, can cause picture tbe damage.
Round Cable 750 * A single solid antenna wire normally matched with a metal plug (F-type) end connector that screws (or pushes) directly onto a 75 Obm input found on the Television or VCR. (Also known as Coaxial Cable.) Lased Caption * Broadcast standard which allows you to read the voice content of television programs on the TV screen. Designed to help the hearing impaired this feature uses on-screen "text boxes” to show dialogue and conversations while the TV program is in progress.
Accessories/Optional 11, *QUA-1 Adapter Connector. 11, *QUA-1 Picture Controls .10 Add/Delete Channels.. &, *Q/U-2 Precariousness L 19, *Q/U-1 Alternate Channel Programming Channels .6, *Q/U-2 Audio/Video Input Jacks Remote Control . 12-18, *Q/U-3 Battery Installation. Requesting Service 19, 22-23 Cable TV Connections/Settings. RF Coaxial Cable.. 1, *QUA-1 Channel Safety/Precautions 3, 18, HQ/U-1 Channel Memory Sensor Remote...
QUALITY SERVICE IS AS CLOSE AS YOUR TELEPHONE! SIMPLY LOOK GIVER THE LIST BELOW FOR THE NUMBER OF A FACTORY Service Cuter HEAR YOU. YOUR PRODUCT WILL RECEIVE EFFICIENT AND EXPEDIENT GARRY-IN, MAIL-IN, OR IN-HOME SERVICE, AND YOU WILL RECEIVE PEACE OF MIND, KNOWING YOUR PRODUCT IS BEING GIVEN THE EXPERT ATTENTION OF Philip S” FACTORY SERVICE. AND, IF THE PHONE NUMBER LISTED FOR YOUR AREA 1S LONG DISTANCE, CALL 1-800-242-9225 ror Factory Service.
LIMITED WARRANTY COLOR TELEVISION 90 Days Free Labor One Year Free Replacement of Parts (Two Years Free Replacement on Color Picture Tube) This product can be repaired in-home. WHO IS COVERED? You must have proof of purchase to receive warranty service, A sales receipt or other document showing that you purchased the product is considered proof of purchase, WHAT IS COVERED? Warranty coverage begins the day you buy your product.
