English CONNECTIONS Rear Fig, 7 @& MAINS: connection for mains lead. ®CO out two cinch plugs for high-quality Compact Duse playback through your amplifier, receiver, etc, € REMOTE IN socket: to connect the unit to the remote control stern of other equipment. ) Voltage selector (NOT ON ALL VERSIONS). # your version has a voltage selector, check that the setting of the voltage selector corresponds with the local mains voltage. The type plate is on the rear of the unit. CONTROLS Front Fig.
Important note for users in the UK. The U K-version is not fitted with 2 mains plug, When fighting @ mains plug to the mains lead proceed as follows: The wires in the rosins teal are colored with the following code: BLUE=NEUTRAL, BROWN=LIVE. As these colors may not correspond with the color markings identifying the terminals in your plug proceed as follows: The Brown wire must be connected 1o the terminal which is marked with the letter L ar colored fed.
PREVIOUS/SEARCH 1, Press briefly {less than 05 second) during PLAY and INTRO SCAN = 10.go 1o the previous track. i you wish to fasten 10 the current track again from the beginning, press the PREVIOUS/SEARCH key B one: playback is interrupted and the track is repeated from the beginning, if you wish 1o repeat one of the previous tracks, press the PREVIOUS SEARCH key @ several times until the desired track number appears on the display 2. Press briefly {less than 0.
Programming during PLAY or SHUFFLE ~ Outing normal playback (PLAY or SHUFFLE}, you can program the number of the current track into the memory by pressing the PROGRAM button &, » When you press the PROGRAM button the latter F appears on the display (D to indicate that the relevant track number hes been programmed into the memory. » Programming 3l the required track burners in the desired sequence. You can program a maximum of 32 tracks into the memory.
