& OPERATING INSTRUCTIONS IN BRIEF The remote control Front of the set RECORD n Record STANDBY m Standby SV/V+ ’VIDEOPlus+’ programming TIMER k TIMER programming on the set CLEAR b 0-9 Reset/clear m Standby Pp 5 Record H Rewind/Reverse scanning Digit buttons 0-9 STOP h Pause/Stop Programme number Plus/Minus Sp Volume control h Pause/Stop G Playback D Menu left I Forward wind/ Forward scanning C Menu right J Cassette eject w Headphones socket GPLAY Playback Sp Volume control A men
& Programming with ’VIDEOPlus+’ How to enter, check or clear a TIMER-block manually All the information required for programming is encoded in the ’VIDEOPlus+’ code. 1 Press the 2 Select a free TIMER block or the TIMER block you want to check or clear. 3 Clear: Press the SV/V+ 1 Press the 2 Enter the entire ’VIDEOPlus+ code’. This code (up to 9 digits) is found next to the start time of a TV programme in your TV guide. If you entered an incorrect code number, clear it with the CLEAR b button.
OPERATING INSTRUCTIONS PHILIPS 14PV182/05 Congratulations on the purchase of one of the most sophisticated and simple-to-use television/video recorders combinations (TV combi) on the market. With this TV combi you can record and play VHS-standard cassettes. Please take the time to read this operating manual before using your TV combi. Safety instructions and other notes • • • • • • • • • • Danger: high voltage! Do not open the set.
1. INSTALLATION Important for the United Kingdom Connecting the cables This apparatus is fitted with an approved moulded 13 Amp plug. To change a fuse in this type of plug proceed as follows: 1 Remove fuse cover and fuse. 2 Fix new fuse which should be a BS1362 5A, A.S.T.A. or BSI approved type. 3 Refit the fuse cover. If the fitted plug is not suitable for your socket outlets, it should be cut off and an appropriate plug fitted in its place.
Connecting additional equipment • • You can also connect additional equipment to the EXTERNAL socket, for instance, a decoder satellite receiver or camcorder. • • • Call up: Use the MENU button. Select: Select a line with the A or B button. Use the 0-9 buttons or the D or C menu button to select within a line. Enter/Alter: With the D or C or with the 0-9 button. Confirm: With the OK button. Exit: With the MENU . Making standard settings STOP h 1 To start, press the button and the C button.
Automatic Channel Search 1 Switch on with the button and the C STOP h button. Press the button simultaniously. Allocating channel numbers D 2 Select and confirm the line ’AUTO STORE’ . 1 Switch on with the button and the C STOP h button. Press the button simultaneously. D 2 Select and confirm the line ’SORT’ . The ’Automatic Channel Search’ function starts.
2. PLAY BACK 1 Insert a cassette into the cassette slot. Tape position/Index search 2 Press the GPLAY play back button. 3 Picture search: Now press the H (rewind) or I (wind) button once or several times. STOP h 4 Interrupt: Press the button. 5 Wind: Stop the tape and press the I H (rewind) or the J Index search: Every time you start to record, the tape is marked with a code mark. button. Press the I button to select the next code mark or the H button for the previous code mark.
3. RECORD 1 Insert a cassette. Programme a recording P p button to select the programme number from which you wish to record, e.g.: ’P 01’ . 2 Use the 3 Press the RECORD n button. 4 Use the STOP h button to stop the recording. 5 If, whilst recording, you want to switch off the TV screen, press the STANDBY m button once. To switch the TV screen on again, press the button.
Programming with ’VIDEOPlus+’ How to enter, check or clear a TIMER block manually All the information required for programming is encoded in the ’VIDEOPlus+’ code. 1 Press the 1 Press the 2 Select a free TIMER block or the TIMER block you want SV/V+ button on the remote control. 3 Clear: Press the ONCE 01 OK 3 If you want to repeat programming at daily or weekly intervals, select the required setting in the ’DAILY/WEEKLY’ line.
4. SPECIAL FEATURES 5 Select and confirm the ’FEATURES’ line. On Screen Display (OSD) 6 Select and confirm the ’PP RECALL’ line. You can switch OSD on or off. 7 Press the 1 Press the MENU MENU button. The set will use this setting. button. 2 Select and confirm the ’FEATURES’ line. Sleep function (switch off) You can programme your set to switch off after a predetermined period. FEATURES vw PP RECALL ON TIMER SLEEPTIMER DISPLAY CHILD LOCK SET CLOCK 0 FULL OFF 1 Press the MENU button.
Child lock 1 Press the MENU button. 2 Select and confirm the ’FEATURES’ line. 3 Select the ’CHILD LOCK’ line. 4 Switch the child lock on or off. 5 Press the MENU Note: * If you want to allocate a decoder, switch the decoder function on or off with the D or C button in the ’DECODER’ line. * If you want to change the automatic channel setting, select the ’FINE TUNING’ line. With the D or C button you can vary the automatic TV channel setting.
Poor playback from TV combi: • Cassette badly worn or of poor quality. • Use the ’TRACKING’ function. No recording possible: • TV channel not stored or wrongly selected. • Cassette with erase protection has been loaded. Programmed recording does not function: • TIMER not set properly. • Time data wrongly programmed. • A cassette with erase protection has been loaded. • VPS/PDC switched on but ’VPS/PDC time’ wrong. Check aerial.
