INTEGRATED CIRCUITS DATA SHEET TDA6103Q Triple video output amplifier Preliminary specification File under Integrated Circuits, IC02 Philips Semiconductors March 1994
Philips Semiconductors Preliminary specification Triple video output amplifier TDA6103Q FEATURES GENERAL DESCRIPTION • High bandwidth: 7.5 MHz typical; 60 V (peak-to-peak value) The TDA6103Q includes three video output amplifiers in one single in-line 9-pin medium power (SIL9MP) package SOT111BE, using high-voltage DMOS technology, intended to drive the three cathodes of a colour CRT.
Philips Semiconductors Preliminary specification Triple video output amplifier TDA6103Q PINNING SYMBOL PIN DESCRIPTION V i1 1 inverting input 2 Vi2 2 3 inverting input 3 Vi3 3 GND 4 ground, fin GND 4 Vip 5 non-inverting input Vip 5 VDD 6 supply voltage 7 cathode output 3 V DD 6 Voc3 Voc2 8 cathode output 2 Voc3 7 Voc1 9 cathode output 1 Voc2 8 V oc1 9 Vi1 1 inverting input 1 Vi2 2 Vi3 TDA6103Q MGA969 Fig.2 Pin configuration.
Philips Semiconductors Preliminary specification Triple video output amplifier TDA6103Q THERMAL RESISTANCE SYMBOL PARAMETER THERMAL RESISTANCE Rth j-fin from junction to fin; note 1 11 K/W Rth h-a from heatsink to ambient 18 K/W Note 1. An external heatsink is necessary.
Philips Semiconductors Preliminary specification Triple video output amplifier TDA6103Q CHARACTERISTICS Operating range: Tj = −20 to 150 °C; VDD = 180 to 210 V; Vip = 1 to 4 V. Test conditions (unless otherwise specified): Tamb = 25 °C; VDD = 200 V; Vip = 1.3 V; Voc1 = Voc2 = Voc3 = 1⁄2VDD; CL = 10 pF (CL consists of parasitic and cathode capacitance); Rth h-a = 18 K/W; measured in test circuit Fig.5. SYMBOL PARAMETER CONDITIONS MIN. TYP. MAX. UNIT IDD quiescent supply current 7.0 9.25 11.
Philips Semiconductors Preliminary specification Triple video output amplifier SYMBOL PARAMETER TDA6103Q CONDITIONS MIN. TYP. MAX.
Philips Semiconductors Preliminary specification Triple video output amplifier TDA6103Q Test circuit C par R4 V DD 100 kΩ C11 100 nF C par Voc1 R5 100 kΩ Vi1 C1 C7 22 µF 8.2 pF C2 22 nF 1 R1 Vin1 0.987 mA C3 C12 3.2 pF 6 9 TDA6103Q Vi2 C4 22 nF Vi3 8.2 pF 0.987 mA C9 22 µF 8.2 pF C6 22 nF Vin3 0.987 mA 7 3 C10 100 nF C16 6.8 pF R9 2 MΩ C17 136 pF R10 100 kΩ C19 6.8 pF R11 2 MΩ C20 136 pF R12 100 kΩ probe 1 probe 2 Voc3 5 4 1.
Philips Semiconductors Preliminary specification Triple video output amplifier TDA6103Q MGA973 200 194 188 Voc 100 5 0 1.2 0 0.633 0.583 ∆V i 1.1 1.2 Fig.6 Typical low-frequency (f < 1 MHz) response of ∆Vi1, 2,3 to Voc1, 2,3. x Vi 0 t x ts overshoot (in %) Voc 151 150 140 149 100 60 50 t tr MGA974 t pd Fig.7 Output voltage (pins 7, 8 and 9) rising edge as a function of the AC input signal.
Philips Semiconductors Preliminary specification Triple video output amplifier TDA6103Q x Vi 0 t x ts 150 140 Voc 100 overshoot (in %) 51 60 50 49 t tf MGA975 t pd Fig.8 Output voltage (pins 7, 8 and 9) falling edge as a function of the AC input signal.
R5 R9 100 kΩ R17 47 Ω 220 Ω 3.3 kΩ R10 680 Ω X1 C6 10 µF (250 V) 100 kΩ 1 2 3 R25 1.2 Ω 4 185 V AQUA V ff V ff (GND) R13 470 Ω TDA6103Q EHT C1 X3 R G B GND 1 4 3 2 1 R6 3.3 kΩ 3 4 5 6 7 8 9 C5 R7 470 Ω 2 R12 680 Ω 100 nF 10 R15 470 Ω C4 220 nF R21 R19 220 kΩ R20 1.5 kΩ 1.5 kΩ kR R22 kG 1.5 kΩ R4 R8 R18 3.3 kΩ 100 kΩ R11 680 Ω R14 470 Ω A51EAL . . X02 kB R23 1.
Philips Semiconductors Preliminary specification Triple video output amplifier 1,2,3 TDA6103Q to differential stage GND VDD 4 6 TDA6103Q from input circuit (1) 7,8,9 Vbias 5 to differential stage to differential stage from input to differential circuit stage MGA971 (1) All pins have an energy protection for positive or negative overstress situations. Fig.10 Internal pin configuration.
Philips Semiconductors Preliminary specification Triple video output amplifier TDA6103Q PACKAGE OUTLINE 22.00 21.35 21.4 20.7 15.1 14.9 2.75 2.50 (2x) 8.7 8.0 3.85 3.45 3.4 3.2 1.75 1.55 fin 5.9 5.7 4.4 4.2 18.5 17.8 6.48 6.14 2 3 4 5 6 7 seating plane 1 8 9 1.1 0.7 0.76 3.9 3.4 1.0 0.3 1.40 1.14 1.0 0.7 2.54 (8x) 0.45 0.25 0.67 0.50 1.40 1.14 0.47 0.38 0.25 M (9x) 2.54 65 o 55 o MBC376 - 1 Dimensions in mm. Fig.
Philips Semiconductors Preliminary specification Triple video output amplifier TDA6103Q SOLDERING Plastic single in-line packages BY DIP OR WAVE The maximum permissible temperature of the solder is 260 °C; this temperature must not be in contact with the joint for more than 5 s. The total contact time of successive solder waves must not exceed 5 s. The device may be mounted up to the seating plane, but the temperature of the plastic body must not exceed the specified storage maximum.
Philips Semiconductors Preliminary specification Triple video output amplifier TDA6103Q NOTES March 1994 14
Philips Semiconductors Preliminary specification Triple video output amplifier TDA6103Q NOTES March 1994 15
Philips Semiconductors – a worldwide company Argentina: IEROD, Av. Juramento 1992 - 14.b, (1428) BUENOS AIRES, Tel. (541)786 7633, Fax. (541)786 9367 Australia: 34 Waterloo Road, NORTH RYDE, NSW 2113, Tel. (02)805 4455, Fax. (02)805 4466 Austria: Triester Str. 64, A-1101 WIEN, P.O. Box 213, Tel. (01)60 101-1236, Fax. (01)60 101-1211 Belgium: Postbus 90050, 5600 PB EINDHOVEN, The Netherlands, Tel. (31)40 783 749, Fax.