Hi-Fi Audio Power Amplifiers Data Sheet

ManualsBrandsPhilips ManualsAmplifierTDA2616

DATA SHEET

Product speciﬁcation

File under Integrated Circuits, IC01

July 1994

INTEGRATED CIRCUITS

TDA2616/TDA2616Q

2 x 12 W hi-fi audio power

amplifiers with mute

Summary of content (12 pages)

PAGE 1
INTEGRATED CIRCUITS DATA SHEET TDA2616/TDA2616Q 2 x 12 W hi-fi audio power amplifiers with mute Product specification File under Integrated Circuits, IC01 July 1994
PAGE 2
Philips Semiconductors Product specification 2 x 12 W hi-fi audio power amplifiers with mute TDA2616/TDA2616Q FEATURES GENERAL DESCRIPTION • Requires very few external components The TDA2616 and TDA2616Q are dual power amplifiers. The TDA2616 is supplied in a 9-lead single-in-line (SIL9) plastic power package (SOT131), while the TDA2616Q is supplied in a 9-lead SIL-bent-to-DIL plastic power package (SOT157).
PAGE 3
Philips Semiconductors Product specification 2 x 12 W hi-fi audio power amplifiers with mute TDA2616/TDA2616Q + VP handbook, full pagewidth 7 VA TDA2616 V ref1 20 kΩ 680 Ω CM VB INV1 1 20 kΩ MUTE 4 OUT1 4 kΩ 2 – VP 5 kΩ + VP V ref3 10 kΩ + VP + V ref2 1/2 V P / GND 3 THERMAL PROTECTION Vref1 voltage comparator VA V B 10 kΩ – V ref2 – VP – VP 20 kΩ INV2 INV1, 2 6 9 8 CM 680 Ω VB 20 kΩ V ref1 VA 5 MCD375 - 1 – VP Fig.1 Block diagram.
PAGE 4
Philips Semiconductors Product specification 2 x 12 W hi-fi audio power amplifiers with mute PINNING TDA2616/TDA2616Q FUNCTIONAL DESCRIPTION SYMBOL PIN The TDA2616 is a hi-fi stereo amplifier designed for mains fed applications, such as stereo radio and TV. The circuit is optimally designed for symmetrical power supplies, but is also well-suited to asymmetrical power supply systems.
PAGE 5
Philips Semiconductors Product specification 2 x 12 W hi-fi audio power amplifiers with mute TDA2616/TDA2616Q LIMITING VALUES In accordance with the Absolute maximum System (IEC 134). SYMBOL PARAMETER CONDITIONS MIN. MAX.
PAGE 6
Philips Semiconductors Product specification 2 x 12 W hi-fi audio power amplifiers with mute TDA2616/TDA2616Q CHARACTERISTICS SYMBOL PARAMETER CONDITIONS MIN. TYP. MAX. UNIT Supply ±VP supply voltage range − 16 21 V IORM repetitive peak output current − 2.2 − A 7.5 16 21 V RL = ∞ 18 40 70 mA THD = 0.
PAGE 7
Philips Semiconductors Product specification 2 x 12 W hi-fi audio power amplifiers with mute SYMBOL ∆VGND PARAMETER CONDITIONS TDA2616/TDA2616Q MIN. TYP. MAX. UNIT − 40 200 mV 18 40 70 mA THD = 0.5% 5 6 − W THD = 10% 6.5 8 − W THD = 0.5%; RL = 4 Ω − 10 − W DC output offset voltage Operating position; note 6 IP total quiescent current PO output power THD = 10%; RL = 4 Ω − 14 − W THD total harmonic distortion PO = 4 W − 0.13 0.
PAGE 8
Philips Semiconductors Product specification 2 x 12 W hi-fi audio power amplifiers with mute TDA2616/TDA2616Q + VP mute input handbook, full pagewidth 2 680 Ω 220 nF VI 2200 µF 7 20 kΩ 4 1 22 nF 20 kΩ 3 8.2 Ω TDA2616 R L= 8 Ω 20 kΩ 220 nF VI 100 nF 9 6 22 nF 8 680 Ω 20 kΩ 8.2 Ω R L= 8 Ω 5 – VP 2200 µF MCD374 - 3 Fig.4 Test and application circuit with symmetrical power supply.
PAGE 9
Philips Semiconductors Product specification 2 x 12 W hi-fi audio power amplifiers with mute RS VP mute input handbook, full pagewidth TDA2616/TDA2616Q 100 nF 2 7 680 Ω 220 nF VI 2200 µF 20 kΩ 4 1 22 nF 20 kΩ 3 8.2 Ω internal 1/2 VP 100 µF TDA2616 680 µF R L= 8 Ω 20 kΩ 220 nF VI 9 6 22 nF 8 680 Ω 20 kΩ 8.2 Ω 680 µF R L= 8 Ω 5 MCD373 - 2 Fig.5 Test and application circuit with asymmetrical power supply.
PAGE 10
Philips Semiconductors Product specification 2 x 12 W hi-fi audio power amplifiers with mute TDA2616/TDA2616Q PACKAGE OUTLINES SIL9P: plastic single in-line power package; 9 leads SOT131-2 non-concave Dh x D Eh view B: mounting base side d A2 seating plane B E j A1 b L c 1 9 e Z Q w M bp 0 5 10 mm scale DIMENSIONS (mm are the original dimensions) UNIT A1 max. A2 b max. bp c D (1) d Dh E (1) e Eh j L Q w x Z (1) mm 2.0 4.6 4.2 1.1 0.75 0.60 0.48 0.38 24.0 23.
PAGE 11
Philips Semiconductors Product specification 2 x 12 W hi-fi audio power amplifiers with mute TDA2616/TDA2616Q DBS9P: plastic DIL-bent-SIL power package; 9 leads (lead length 12 mm) SOT157-2 non-concave Dh x D Eh view B: mounting base side d A2 B j E A L3 L Q c 1 9 e1 Z bp e e2 m w M 0 5 v M 10 mm scale DIMENSIONS (mm are the original dimensions) UNIT A A2 bp c D (1) d Dh E (1) e mm 17.0 15.5 4.6 4.2 0.75 0.60 0.48 0.38 24.0 23.6 20.0 19.6 10 12.2 11.8 5.
PAGE 12
Philips Semiconductors Product specification 2 x 12 W hi-fi audio power amplifiers with mute TDA2616/TDA2616Q The device may be mounted up to the seating plane, but the temperature of the plastic body must not exceed the specified maximum storage temperature (Tstg max). If the printed-circuit board has been pre-heated, forced cooling may be necessary immediately after soldering to keep the temperature within the permissible limit.