Hi-Fi Audio Power Amplifier Data Sheet

ManualsBrandsPhilips ManualsAmplifierTDA2615

DATA SHEET

Product speciﬁcation

Supersedes data of July 1994

File under Integrated Circuits, IC01

1995 May 08

INTEGRATED CIRCUITS

Philips Semiconductors

TDA2615

2 × 6 W hi-fi audio power amplifier

Summary of content (12 pages)

PAGE 1
INTEGRATED CIRCUITS DATA SHEET TDA2615 2 × 6 W hi-fi audio power amplifier Product specification Supersedes data of July 1994 File under Integrated Circuits, IC01 Philips Semiconductors 1995 May 08
PAGE 2
Philips Semiconductors Product specification 2 × 6 W hi-fi audio power amplifier TDA2615 FEATURES GENERAL DESCRIPTION • Requires very few external components The TDA2615 is a dual power amplifier in a 9-lead plastic single-in-line (SIL9MPF) medium power package. It has been especially designed for mains fed applications, such as stereo radio and stereo TV.
PAGE 3
Philips Semiconductors Product specification 2 × 6 W hi-fi audio power amplifier TDA2615 BLOCK DIAGRAM + VP 7 VA TDA2615 V ref1 20 kΩ 680 Ω CM VB INV1 1 20 kΩ MUTE 4 OUT1 4 kΩ 2 – VP 5 kΩ + VP V ref3 10 kΩ + VP + V ref2 1/2 V P / GND 3 THERMAL PROTECTION Vref1 voltage comparator VA V B 10 kΩ – V ref2 – VP – VP 20 kΩ INV2 INV1, 2 6 9 8 CM 680 Ω VB 20 kΩ V ref1 VA 5 MLA711 – VP Fig.1 Block diagram.
PAGE 4
Philips Semiconductors Product specification 2 × 6 W hi-fi audio power amplifier TDA2615 PINNING SYMBOL FUNCTIONAL DESCRIPTION PIN −INV1 1 non-inverting input 1 MUTE 2 mute input 1⁄ 3 1⁄ OUT1 4 output 1 −VP 5 supply voltage (negative) OUT2 6 output 2 +VP 7 supply voltage (positive) INV1, 2 8 inverting input 1 and 2 −INV2 9 non-inverting input 2 2VP/GND The TDA2615 is a hi-fi stereo amplifier designed for mains fed applications, such as stereo radio and stereo TV.
PAGE 5
Philips Semiconductors Product specification 2 × 6 W hi-fi audio power amplifier TDA2615 LIMITING VALUES In accordance with the Absolute maximum System (IEC 134). SYMBOL PARAMETER CONDITIONS MIN. MAX.
PAGE 6
Philips Semiconductors Product specification 2 × 6 W hi-fi audio power amplifier TDA2615 CHARACTERISTICS SYMBOL PARAMETER CONDITIONS MIN. TYP. MAX. UNIT Supply ±VP supply voltage range − 12 21 V IORM repetitive peak output current 2.2 − − A 7.5 12 21 V 18 40 70 mA Operating position; note 1 ±VP supply voltage range Iq(tot) total quiescent current PO output power RL = ∞ THD = 0.5% 5 6 − W THD = 10% 6.5 8 − W THD total harmonic distortion PO = 4 W − 0.15 0.
PAGE 7
Philips Semiconductors Product specification 2 × 6 W hi-fi audio power amplifier SYMBOL PARAMETER TDA2615 CONDITIONS MIN. TYP. MAX. UNIT Operating position; note 6 Iq(tot) total quiescent current PO output power 18 40 70 mA THD = 0.5% 5 6 − W THD = 10% 6.5 8 − W THD total harmonic distortion PO = 4 W − 0.13 0.2 % B power bandwidth THD = 0.5%; note 1 − 40 to 20000 − Hz Gv voltage gain 29 30 31 dB Gv gain unbalance Vno noise output voltage Zi − 0.
PAGE 8
Philips Semiconductors Product specification 2 × 6 W hi-fi audio power amplifier TDA2615 TEST AND APPLICATION INFORMATION + VP mute input 2 680 Ω 220 nF VI 2200 µF 7 20 kΩ 4 1 22 nF 20 kΩ 3 8.2 Ω TDA2615 R L= 8 Ω 20 kΩ 220 nF VI 100 nF 9 6 22 nF 8 680 Ω 20 kΩ 8.2 Ω R L= 8 Ω 5 MLA710 - 2 2200 µF Fig.4 Test and application circuit with symmetrical power supply.
PAGE 9
Philips Semiconductors Product specification 2 × 6 W hi-fi audio power amplifier TDA2615 RS VP mute input 100 nF 2 7 680 Ω 220 nF VI 2200 µF 20 kΩ 4 1 22 nF 20 kΩ 3 8.2 Ω internal 1/2 VP 100 µF TDA2615 680 µF R L= 8 Ω 20 kΩ 220 nF VI 9 6 22 nF 8 680 Ω 20 kΩ 8.2 Ω 680 µF R L= 8 Ω 5 MLA709 - 1 Fig.5 Test and application circuit with asymmetrical power supply.
PAGE 10
Philips Semiconductors Product specification 2 × 6 W hi-fi audio power amplifier TDA2615 PACKAGE OUTLINE SIL9MPF: plastic single in-line medium power package with fin; 9 leads SOT110-1 D D1 q P A2 P1 A3 q1 q2 A A4 seating plane E pin 1 index c L 1 9 b e Z Q b2 w M b1 0 5 10 mm scale DIMENSIONS (mm are the original dimensions) UNIT A A2 max. A3 A4 b b1 b2 c D (1) D1 E (1) e L P P1 Q q q1 q2 w Z (1) max. mm 18.5 17.8 3.7 8.7 8.0 15.8 15.4 1.40 1.14 0.67 0.
PAGE 11
Philips Semiconductors Product specification 2 × 6 W hi-fi audio power amplifier TDA2615 been pre-heated, forced cooling may be necessary immediately after soldering to keep the temperature within the permissible limit. SOLDERING Plastic single in-line packages BY DIP OR WAVE REPAIRING SOLDERED JOINTS The maximum permissible temperature of the solder is 260 °C; this temperature must not be in contact with the joint for more than 5 s.
PAGE 12
Philips Semiconductors – a worldwide company Argentina: IEROD, Av. Juramento 1992 - 14.b, (1428) BUENOS AIRES, Tel. (541)786 7633, Fax. (541)786 9367 Australia: 34 Waterloo Road, NORTH RYDE, NSW 2113, Tel. (02)805 4455, Fax. (02)805 4466 Austria: Triester Str. 64, A-1101 WIEN, P.O. Box 213, Tel. (01)60 101-1236, Fax. (01)60 101-1211 Belgium: Postbus 90050, 5600 PB EINDHOVEN, The Netherlands, Tel. (31)40 783 749, Fax.