INTEGRATED CIRCUITS DATA SHEET TDA2613 6 W hi-fi audio power amplifier Product specification File under Integrated circuits, IC01 July 1994
Philips Semiconductors Product specification 6 W hi-fi audio power amplifier TDA2613 GENERAL DESCRIPTION The TDA2613 is a hi-fi audio power amplifier encapsulated in a 9-lead SIL plastic power package. The device is especially designed for mains fed applications (e.g. tv and radio).
Philips Semiconductors Product specification 6 W hi-fi audio power amplifier TDA2613 Fig.1 Block diagram. PINNING 1. n.c. not connected 2. n.c. not connected 3. VP/2 4. n.c. July 1994 ⁄2 VP (asymmetrical) or 5. GND ground (asymmetrical) or negative supply (symmetrical) 1 6. OUT output ground (symmetrical) 7. +VP positive supply not connected 8. INV inverting input 9.
Philips Semiconductors Product specification 6 W hi-fi audio power amplifier TDA2613 FUNCTIONAL DESCRIPTION This hi-fi power amplifier is designed for mains fed applications. The device is intended for asymmetrical power supplies, but a symmetrical supply may also be used. An output power of 6 watts (THD = 0,5%) can be delivered into an 8 Ω load with an asymmetrical power supply of 24 V. The gain is fixed internally at 30 dB. Internal gain fixing gives low gain spread.
Philips Semiconductors Product specification 6 W hi-fi audio power amplifier TDA2613 Fig.2 Power derating curve.
Philips Semiconductors Product specification 6 W hi-fi audio power amplifier TDA2613 CHARACTERISTICS PARAMETER CONDITIONS SYMBOL MIN. TYP. MAX. UNIT Supply voltage range operating mode VP 15 24 42 V input mute mode VP 4 − 10 V IORM 2.2 − − A Repetitive peak output current Operating mode: asymmetrical power supply; test circuit as per Fig.
Philips Semiconductors Product specification 6 W hi-fi audio power amplifier PARAMETER TDA2613 CONDITIONS SYMBOL MIN. TYP. MAX. UNIT Operating mode: symmetrical power supply; test circuit as per Fig.
Philips Semiconductors Product specification 6 W hi-fi audio power amplifier TDA2613 APPLICATION INFORMATION Fig.3 Test and application circuit; symmetrical power supply. Fig.4 Test and application circuit; asymmetrical power supply.
Philips Semiconductors Product specification 6 W hi-fi audio power amplifier TDA2613 Input mute circuit The input mute circuit operates only during switching on and off of the supply voltage. The circuit compares the 1⁄2 supply voltage (at pin 3) with an internally fixed reference voltage (Vref), derived directly from the supply voltage. When the voltage at pin 3 is lower than Vref the non-inverting input (pin 9) is disconnected from the amplifier.
Philips Semiconductors Product specification 6 W hi-fi audio power amplifier TDA2613 PACKAGE OUTLINE SIL9MPF: plastic single in-line medium power package with fin; 9 leads SOT110-1 D D1 q P A2 P1 A3 q1 q2 A A4 seating plane E pin 1 index c L 1 9 b e Z Q b2 w M b1 0 5 10 mm scale DIMENSIONS (mm are the original dimensions) UNIT A A2 max. A3 A4 b b1 b2 c D (1) D1 E (1) e L P P1 Q q q1 q2 w Z (1) max. mm 18.5 17.8 3.7 8.7 8.0 15.8 15.4 1.40 1.14 0.67 0.
Philips Semiconductors Product specification 6 W hi-fi audio power amplifier TDA2613 The device may be mounted up to the seating plane, but the temperature of the plastic body must not exceed the specified maximum storage temperature (Tstg max). If the printed-circuit board has been pre-heated, forced cooling may be necessary immediately after soldering to keep the temperature within the permissible limit. SOLDERING Introduction There is no soldering method that is ideal for all IC packages.
