DAB+ radio 5000 Series R5005
Your FM/DAB radio the main unit Adjust the volume level Set alarm timer Set sleep timer
Your FM/DAB radio . know the time. set two alarms.
Alarm SCAN/SELECT Set alarm. Activate or deactivate alarm timer. Snooze the alarm. Set the sleep timer. Tune to an FM station. Navigate a DAB station list. Navigate an FM/DAB menu. Press to display information in FM/DAB mode. In working mode, press and hold to access the top menu. Preset stations (1, 2, 3, 4) Store/directly access preset 1, 2, 3 or 4. Connect to the supplied power adaptor . Display and select preset stations.
Turn on • Adjust the volume level • Press VOLUME +/- repeatedly to adjust volume.
At step 2, you can also press and hold preset key 1, 2, 3 or 4 to save the current station to the corresponding position directly. To remove a preset DAB radio station, store another station in its place.
[ Full scan ] : [ Manual tune ] : [ DRC ] : Press the numeric key 1-4 directly. [ Prune ] : [ Clock ] : set time/date, select 12/24 hour, and set time synchronization.
At step 2, you can also press and hold preset key 1, 2, 3 or 4 to save the current station to the corresponding position directly. To remove a pre-stored FM radio station, store another station in its place. In FM mode, you have two ways to select a preset radio station. Option A: Option B: Press the numeric key 1-4 directly.
While listening to FM radio, press [ Scan setting ] : s [ Clock ] : set time/date, select 12/24 hour, and set time synchronization [ Backlight ] : adjust backlight settings (3 options : Time out/ On level/ Dim level) [ System ] : adjust system settings: [ Language ] : set system language (English/ Deutsch/ Italiano/ Francais/ Nederlands/ Norwegian) [ Factory Reset ] : reset the unit. [ SW version ] : view software version.
Set alarm timer Set sleep timer Set alarm You can set two alarms to ring at different time. Make sure that the clock is set correctly. [ Sleep ] In standby mode, press and hold for two seconds to access alarm menu. Press Alarm 2. Press to select Alarm 1 or to confirm. Repeat steps 2 to 3 if any sub-option is available (alarm time, duration, source, days, volume, on/off) Activate/deactivate alarm timer Press repeatedly to activate or deactivate the alarm timer.
Alarm does not work Set the clock/alarm correctly.
MMD Hong Kong Holding Limited Declaration of conformity This product complies with the radio interference requirements of the European community. Hereby, MMD Hong Kong Holding Limited declares that the product is in compliance with the essential requirements and other relevant provisions of RED Directive 2014/53/EU and UK radio Equipment Regulations IS 2017 No 1206. You can find the Declaration of Conformity on www.philips.com/support.
TAR5005_10_UM_V2.
