Smart Speaker User manual PS402 Register your product and get support at www.philips.
Contents 1 Important Safety Notice 2 Your Wireless speaker Introduction What's in the box Overview of the speaker 3 Get started Connect power Google home APP 4 You can also use a BLUETOOTH speaker Connect a Bluetooth device Play from a connected Bluetooth device Disconnect a device Reconnect a device Set clock Set alarm time Wireless charging Standby mode 5 Other features Adjust volume 6 1 1 1 3 3 3 4 5 5 6 7 7 8 8 8 8 8 9 9 10 10 10 7 Troubleshooting General 11 11
1 Important Safety Warning • Never remove the casing of this speaker. • Never place this speaker on other electrical equipment. • Keep this speaker away from direct Notice to this device that are not expressly approved by MMD Hong Kong Holding Limited may void the user’s authority to operate the equipment. Compliance • Only use attachments or manufacturer. • Do not place any sources of danger on the speaker (e.g. lighted candles).
2013/56/EU which cannot be disposed of with normal household waste. We strongly advise you to take your product service centre to have a professional remove the rechargeable battery. Inform yourself about the local separate collection system for electrical and electronic products and rechargeable batteries. Follow local rules and never dispose of the product and rechargeable batteries with normal household waste.
2 Your wireless speaker Congratulations on your purchase, and your product at www.philips.com/ welcome. Introduction With this speaker, you can enjoy audio from Bluetooth-enabled devices or play network audio resources.
Overview of the speaker USB Wireless charging/ Wireless charging Vol+/ 1 step down (Short press) continous steps up (Long press 3s or 3s+) Mute/ USB charging port Charge your mobile devices Max output 5V 1A current Push to talk/ Push to talk(Short press) standby (Long press 3s) Play/Pause/ Play/Pause/Exit standy mode/ stop timer/alarm(Short press) Open the bluetooth after successful authentication (Long press 3s) Enter standy mode (Long press 10s) Mode/ Clock light brightness adjust (Short press) Bott
3 Get started Always follow the instructions in this chapter in sequence. Connect power Caution Risk of product damage! Make sure that the power voltage corresponds to the voltage printed on the back or underside of the clock radio. Risk of electric shock! When you unplug the AC plug, always pull the plug from the socket. Never pull the cord. Connect the power adaptor to the wall outlet.
“Google Home”APP 1 2 Place the unit as close as possible to a wireless LAN router. Establish a wireless connection from your smartphone/iPhone to the wireless LAN router. Take a note of the SSID and the password(encryption key) of the connected wireless LAN router. some of the wireless LAN routers have multiple SSIDs.for details, refer to the operating instructions supplied with the wireless LAN router. On the iPhone,activate the BLUETOOTH funtion.
4 You can also use as a BLUETOOTH speaker With this speaker, you can listen to audio from Bluetooth-enabled devices and play music through Bluetooth. • can open BTpairing by voice,“Ok, google open the bluetooth”/ “Ok，google bluetooth pairing”. speaker will be waiting status,for pairing other Bluetooth device. Form your smartphone or other device’ s BLUETOOTH seting, unit you setup for Wi-Fi.
Play from a connected Bluetooth device After successful Bluetooth connection, play audio on the connected device. » Audio streams from your Bluetooth device to the speaker. • To pause or resume play, press . Set clock Automatically setup and display after networking. Tip • You can also use your Bluetooth device to control play. Disconnect a device • • Disable Bluetooth on your device; Move the device beyond the communication range.
Wireless charging Standby mode • Network standby Module GVA lighting • • Color warm white: normal /charging complete. Color orange: charging. Color orange blink: charging error. Description clock OFF OFF(No wireless charging) On OFF OFF(No wireless charging) --|-（blink) - • Bottom lighting On(wireless charging) - After authentication Reset state Keep on • Triggering conditions 1. Google authentication succeeded. 2.
5 Other features Adjust volume During music playback,press -/+ to increase or decrease volume. Tip • • You can press and hold -/+ to increase or decrease volume continuously. When the volume reaches the maximum, the speaker beeps twice. 6 Note • Product information is subject to change without prior notice. Rated output 2x8W Acousic frequency response 60-20000 Hz Speaker driver 2 x 1.5” full range, 8Ω Bass 1 x passive enhancement radiator Bluetooth version V4.2 Bluetooth AVRCP V1.5, A2DP1.
GENERAL DESCRIPTION OF EUT: • Max.e.i.r.p.:IEEE 802.11a:17.97dBm IEEE 802.11n(HT20):16.94dBm IEEE 802.11n(HT40):15.86dBm 7 Troubleshooting IEEE 802.11ac(VHT20):17.93dBm IEEE 802.11ac(VHT40):16.96dBm IEEE 802.11ac(VHT80):16.92dBm • BT（2402-2480MHz）:8.07dBm Warning • Never remove the casing of this device. BT LE（2402-2480MHz）: 9.00dBm WIFI 2.4GHz(2412-2472MHz):19.94dBm WIFI 5GHz(5150- 5250MHz): 17.93dBm WIFI 5GHz(5250- 5350MHz): 17.97dBm WIFI 5GHz(5470 -5725MHz): 17.92dBm WIFI 5GHz(5725-5850MHz):13.
2019 © MMD Hong Kong Holding Limited.All rights reserved. This product has been manufactured by,and is sold under the responsibility of MMD Hong Kong Holding Limited,and MMD Hong Kong Holding Limited.is the warrantor in relation to this product. Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V.and are used under license. TAPS402_00 _UM_V 1.
