Headphones 1000 Series TAN1207
About operating and storage temperatures and humidity • Store in a place where temperature is between -20°C (4°F) and 50°C (122 °F) (up to 90% relative humidity. • Operate in a place where temperture is between 0°C (32°F) and 45°C (113 °F) (up to 90% relative humidity. • Battery life may be shorter in high or low temperature conditions.
What's in the box Quick start guide 丿 Congratulations on your purchase, and welcome to Philips! To fully benefit from the support that Philips offers, register your product at www.philips.com/welcome. With this Philips in-ear headphones, you can: enjoy convenient wireless handsfree calls; enjoy and control wireless music; switch between calls and music. / USB-C charging cable (for charging only) 。 2 Your Bluetooth 1n-ear headphones Global Warranty Other devices A mobile phone or device (e.g.
6 Music/call control
3 Get started Charge the battery Note • Before you use your headphones for the first time, charge the battery for 2 hours for optimum battery capacity and lifetime • Use only the original USB charging cable to avoid any damage • Finish your call before charging the headphones, as connecting the headphones for charging will power the headphones off Connect the supplied USB charging cable to the charging slot on the headphones and the charger/USB port of a computer.
Press and hold (>1s) Press and hold (>1s) play and pause In pairing state, quickly click the play pause button 6 times
fashes two times every 4 seconds. three every 10 seconds.
5 Technical data • • • • • • • • • • • • • • • • Music time: 15 hours Talk time: 5 hours Standby time: 60 hours Normal time for a full charge: 2 hours Battery: Rechargeable lithium polymer battery (150 mAh) Bluetooth version: 5.0 or above Compatible Bluetooth profiles: Bluetooth profile: HFP, A2DP,AVRCP Operating range: Up to 10 meters (33 feet) Speaker driver: 12.
Notice of compliance The device complies with the FCC rules, Part 15. Operation is subject to the following two conditions: 1. This device may not cause harmful interference, and 2. This device must accept any interference received, including interference that may cause undesired operation. FCC rules This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
8 Frequently asked questions My Bluetooth headphone does not turn on. The battery level is low. Charge the headphone. I cannot pair my Bluetooth headphones with my Bluetooth device. The Bluetooth is disabled. Enable the Bluetooth feature on your Bluetooth device and turn on the Bluetooth device before you turn on the headphone. The audio quality is poor and crackling noise can be heard. The Bluetooth device is out of range.
2022©MMD Hong Kong Holding Limited. All rights reserved. Specifications are subject to change without notice. Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V. and are used under license. This product has been manufactured by and is sold under the responsibility of MMD Hong Kong Holding Limited or one of its affiliates, and MMD Hong Kong Holding Limited is the warrantor in relation to this product.
