Soundbar 7000 Series TAB7807 User manual Register your product and get support at www.philips.
Contents 1 Important safety instructions Safety Care for your product Care of the environment Declaration of conformity Help and support FCC information 2 Your Soundbar What’s in the box Soundbar Connectors Wireless subwoofer Remote control Prepare the remote control Placement Wall mount 3 Connect Dolby Atmos® Connect to HDMI socket Connect to Optical socket Connect to Audio in socket Connect to power Pair up with the subwoofer 4 Use your soundbar ŏľĚ ġĚ ½ĚÞ ġŻ Select modes Adjust the volume Dolby sou
1 Important safety instructions Read and understand all instructions before you use your product. If damage is caused by failure to follow instructions, the warranty does not apply. • • • Safety Know these safety symbols • CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN • CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
• • • Never place the product or any objects on power cords or on other electrical equipment. If the product is transported in temperatures below 5°C, unpack the product and wait until its temperature matches room temperature before connecting it to the power outlet. Parts of this product can be made of glass. Handle with care to avoid injury and damage.
Declaration of conformity Help and support This product complies with the radio interference requirements of the European community. Hereby, MMD Hong Kong Holding Limited declares that the product is in compliance with the essential requirements and other relevant provisions of RED Directive 2014/53/EU and UK Radio Equipment Regulations E ԜԚԛԡ ^ġ ԛԜԚԠ֣ ±ġŏ Ø½Ě žĚÞ Ŋüâ Declaration of Conformity on www.philips.com/support. For extensive online support, visit www.philips.
FCC information NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
• 2 Your Soundbar • Congratulations on your purchase, and welcome to Philips! To fully Power cord quantity and plug type vary by regions. Images, illustrations and drawings shown on this User Manual are for reference only, actual product may vary in appearance. Soundbar www.philips.com/support. This section includes an overview of the soundbar.
Connectors Wireless subwoofer This section includes an overview of the connectors available on your soundbar. This section includes an overview of the wireless subwoofer. 1 2 3 4 5 1 6 7 1 Audio in Audio input from, for example, an MP3 player (3.5mm jack). 2 USB • Connect to a USB storage device for audio media play. • Upgrade software of this product. 3 HDMI out (eARC) socket The port supports the eARC/ARC HDMI feature, connect to the HDMI (eARC/ARC) input on the TV.
Remote control 9 This section includes an overview of the remote control. 1 2 (Standby-On) button • Switch the soundbar On or to standby. • Long press for 20 seconds in power on state to enable or disable APD (15 minutes Auto-Standby) (Dolby Atmos) ªÿľŊŏ½ē ŏľľġŏĚÞ ÞâØġÞâľ ġĚֳġŻ֣ 4 (Mute) Mute or restore volume. 1 2 3 4 5 (Source) • Press to select an input source for soundbar. • Press and hold to disconnect all devices and enter the Bluetooth pairing mode.
Replace the remote control battery • Slide to remove the battery compartment cover, insert 2 AAA batteries (1.5V) with correct polarity, then slide the battery compartment cover back into position. • • • Make sure the (+) and (–) ends of the batteries match the (+) and (–) ends indicated in the battery compartment. • • 1 • 2 Do not place the remote control on a wet object. Do not place the remote control under direct sunlight or near sources of excessive heat.
« ^E^<֨ Wall mount • To prevent injury, this apparatus must be securely Note • Improper wall mounting may result in accident, • • • • • injury or damage. If you have any query, contact Consumer Care in your country. Before wall mounting, make sure the wall can support the weight of your soundbar.
3 Connect Note • The full Dolby Atmos experience is only This section helps you connect your soundbar to a TV and other devices, and then set it up. Note • ;ġľ ÿÞâĚŊÿžØ½ŊÿġĚ ½ĚÞ łŏĻĻēŮ ľ½ŊÿĚöł֤ łââ Ŋüâ • available when the soundbar is connected to the source via a HDMI 2.0 cable. The soundbar will still function when connected via other methods (such as a Digital Optical cable) but they are unable to support all of the Dolby features.
2 Using a High Speed HDMI cable, connect the HDMI out (eARC/ARC) connector on your soundbar to the HDMI ARC connector on the TV. Optical in Note TV • Your TV must support the HDMI-CEC and ARC • • Optical out function. HDMI-CEC and ARC must be set to On. The setting method of HDMI-CEC and ARC may ÞÿŻâľ ÞâĻâĚÞÿĚö ġĚ Ŋüâ ª֣ ;ġľ ÞâŊ½ÿēł ½×ġŏŊ function, please refer to your TV user manual. Make sure to use the HDMI cables can support the ARC function.
AC~
4 Use your soundbar Display AUX Audio in This section helps you use the soundbar to play audio from connected devices. BT NO BT Bluetooth • Connected • Connection Before you start OPT Optical E-ARC ARC HDMI eARC HDMI ARC HD I HDMI IN • • Make the necessary connections described in the quick start guide and the user manual. Switch the soundbar to the correct source for other devices.
Dolby sound mode Display Description âēâØŊ âĽŏ½ēÿŶâľ ַ)ָ âŻâØŊ EQ Experience an immersive audio experience with Dolby sound modes. XX Adjust the bass level 1 Press xx Adjust the treble level YNC Set the Audio Delay button on the remote control Ŋġ ŊŏľĚ %ġē×Ů ęġÞâ ġĚ ġľ ġŻ֣ • On: Create a Dolby listening experience. (Upmix: Take full advantage of all speakers). • dŻ: Use default channel listening. (Standard: Speakers output follow the default channel.
AV SYNC Set the Audio Delay. Video image processing, sometimes longer than the time required to process the audio signal. This is called “delayed.” Audio Delay feature is designed to remedy this delay. • AV 00. AV 10 ... AV200 » By default, the audio delay is set to 00. CTR (Center) Adjust the center channel volume • CTR-5 ... CTR+5 » By default, the center channel volume is set to 0.
Play from Bluetooth devices To disconnect and pair a new Bluetooth device 1 In Bluetooth mode, Press Through Bluetooth, connect the soundbar with your Bluetooth device (such as an iPad, iPhone, iPod touch, Android phone, or laptop), and then you Ø½Ě ēÿłŊâĚ Ŋġ Ŋüâ ½ŏÞÿġ žēâł łŊġľâÞ ġĚ Ŋüâ device through your soundbar speakers. > select “BT PAIR” > Then press (Enter) to disconnect all devices and enter the Bluetooth pairing mode.
Listen to an external device Play audio through USB Ensure that the soundbar is connected to the TV or audio device. Enjoy audio on a USB storage device, łŏØü ½ł ½Ě ]~ԝ Ļē½Ůâľ ½ĚÞ ſ½łü memory, etc. 1 Press the button repeatedly on the soundbar or on the remote control to select the Audio in, Optical, HDMI eARC/ARC, HDMI in mode. 1 Insert the USB device. 2 Operate your audio device directly for playback features. 3 Press the +/– (Volume) buttons to adjust the volume to your desired level.
5 Product specifications Note • ĻâØÿžØ½ŊÿġĚł ½ĚÞ ÞâłÿöĚ ½ľâ łŏ×čâØŊ to change without notice. Bluetooth / Wireless A2DP, AVRCP Bluetooth version V 5.1 Bluetooth frequency range / Transmitter power (EIRP) 2402 ~ 2480MHz < 10dBm 2.4G wireless frequency range / Transmitter power (EIRP) 2402 ~ 2480MHz < 10dBm 100-240V~ 50/60 Hz Power consumption 45 W Standby consumption < 0.5 W Frequency response 35 Hz - 140 Hz Impedance ԝ ʷ Dimensions 190 x 410 x 309 mm Weight 6.
6 Troubleshooting Distorted sound or echo. • If you play audio from TV through this product, make sure that the TV is muted. Warning • Risk of electric shock. Never remove the casing of the product. To keep the warranty valid, never try to repair the product yourself. If you have problems using this product, check the following points before you request service. If you still have a problem, get support at www.philips.com/support. Main unit Audio and video are not synchronized.
• • The device is not correctly connected. Connect the device correctly. The soundbar is already connected with another Bluetooth device. Disconnect the connected device, and then try again. Quality of audio play from a connected Bluetooth device is poor. • The Bluetooth reception is poor. Move the device closer to the soundbar, or remove any obstacle between the device and the soundbar. unit on my Bluetooth device.
SpâØÿžØ½ŊÿġĚł ½ľâ łŏ×čâØŊ Ŋġ Øü½Ěöâ ŨÿŊüġŏŊ ĚġŊÿØâ֣ ~ēâ½łâ ŧÿłÿŊ www.Philips.com/support for the latest updates and documents. Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V. and are used under license. This product has been manufactured by and is sold under the responsibility ġõ ]]% BġĚö UġĚö BġēÞÿĚö WÿęÿŊâÞ֣ ġľ ġĚâ ġõ ÿŊł ½żēÿ½Ŋâł֤ ½ĚÞ ]]% Hong Kong Holding Limited. is the warrantor in relation to this product.
