5000 Series TAB5706 User manual Register your product and get support at www.philips.
Contents 1 Important Safety Care for your product Care of the environment FCC information Help and support 2 Your Soundbar What’s in the Box Main unit Connectors Remote control Prepare the Remote Control Placement Wall mount 3 Connect Connect to HDMI Socket Connect to Optical Socket Connect to AUX Socket Connect to Power 2 3 3 4 4 5 6 6 6 7 7 8 8 9 10 11 11 11 12 12 4 Use your Soundbar Turn ON and OFF Select Source Select Equalizer (EQ) Effect Adjust the Volume Factory Reset Bluetooth Operation USB Ope
Important Read and understand all instructions before you use your product. If damage is caused by failure to follow instructions, the warranty does not apply. Risk of short circuit or fire! • • Safety Risk of electric shock or fire! • Before you make or change any connections, make sure that all devices are disconnected from the power outlet. • Never expose the product and accessories to rain or water. Never place liquid containers, such as vases, near the product.
• • Replace only with the same or equivalent type. Remove batteries if they are exhausted or if the remote control is not to be used for a long time. Batteries contain chemical substances, they should be disposed of properly. Risk of swallowing batteries! • • • • The product/remote control may contain a coin/button type battery, which can be swallowed. Keep the battery out of reach of children at all times! If swallowed, the battery can cause serious injury or death.
IC-Canada : CAN ICES-3(B)/ NMB-3(B) NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Help and support For extensive online support, visit www.philips.com/support to: • download the user manual and the quick start guide • watch video tutorials (available only for selected models) • find answers to frequently answered questions (FAQs) • email us a question • chat with our support representative. Follow the instructions on the website to select your language, and then enter your product model number. Alternatively, you can contact Consumer Care in your country.
This section includes an overview of the main unit. 1 2 3 OPTICAL [OPTICAL] Solid white HDMI ARC [HDMI ARC] Solid white 5 Remote Control Sensor 6 Built-in Subwoofer Eng lis h Main unit Connectors This section includes an overview of the connectors available on your Soundbar. 6 4 5 6 1 +/- (Volume) Increase or decrease volume. 2 (Source) Select an input source for the Soundbar. 3 4 1 2 3 4 5 1 AC~ Connect to the power supply. (Standby-On) Switch the Soundbar On or to Standby.
Remote control 1 This section includes an overview of the remote control. 1 2 4 (Standby-On) Switch the Soundbar on or to standby. 2 5 6 Source buttons AUX: Switch your audio source to the AUX connection (3.5mm jack). BT / Pair: Switch to Bluetooth mode. 3 7 Press and hold to activate the pairing function in Bluetooth mode or disconnect the existing paired Bluetooth device. HDMI ARC: Switch your source to HDMI ARC connection. OPTICAL: Switch your audio source to the optical connection.
• • • 1 2 3 Press and slide the back cover to open the battery compartment of the remote control. Insert two AAA size batteries (included). Make sure the (+) and (–) ends of the batteries match the (+) and (–) ends indicated in the battery compartment. Close the battery compartment cover. • Remove the battery from the remote control when not in use for a long period of time, as corrosion or battery leakage may occur and result in physical injury, and/or property damage, and/or fire.
1 Wall mount Note •• Improper wall mounting may result in accident, •• •• •• •• injury or damage. If you have any query, contact Consumer Care in your country. Before wall mounting, make sure the wall can support the weight of your Soundbar. Before wall mount, you need not remove the rubber feet at the bottom of the Soundbar, otherwise the rubber feet cannot be fixed back. Depending on the type of wall mounting your Soundbar, make sure that you use screws of a suitable length and diameter.
This section helps you connect your Soundbar to a TV and other devices, and then set it up. For information about the basic connections of your Soundbar and accessories, see the quick start guide. 2 The HDMI ARC connector on the TV might be labeled differently. For details, see the TV user manual. Using a High Speed HDMI cable, connect the HDMI ARC connector on your Soundbar to the HDMI ARC connector on the TV.
Connect to AUX Socket Connect to Power a. • • Before connecting the AC power cord, ensure you have completed all other connections. • Risk of product damage! Ensure that the power supply voltage corresponds to the voltage printed on the back or the underside of the unit. Use a 3.5mm to 3.5mm audio cable Use a 3.5mm to 3.5mm audio cable (not included) to connect the TV’s headphone socket to the AUX socket on the unit. 1 AUX IN Headphone (3.
Select Source 1 This section helps you use the Soundbar to play audio from connected devices. Before you start • Make the necessary connections described in the quick start guide and the user manual. • Switch the Soundbar to the correct source for other devices. Press the button repeatedly on the unit or press the AUX, OPTICAL, HDMI ARC, BT/Pair, USB buttons on the remote control to select the desired mode. »» The indicator light on the Soundbar will show which mode is currently in use.
• Stadium (2 LEDs blink): Create an atmosphere as if watching a sports game in a stadium. Vol- Adjust the built-in Subwoofer’s Mute Volume 1 Movie Press +/- (subwoofer) to increase or decrease the built-in Subwoofer’s volume. Music bass +5 Voice Stadium bass -5 Maxthe Volume Adjust Vol+ When adjusting the volume of the soundbar and subwoofer, the status indicator will increase / decrease the amount Vol- of light.
Through Bluetooth, connect the Soundbar with your Bluetooth device (such as an iPad, iPhone, iPod touch, Android phone, or laptop), and then you can listen to the audio files stored on the device through your Soundbar speakers. • 5 What you need • • 1 2 3 4 A Bluetooth device which supports Bluetooth profile A2DP, AVRCP and with Bluetooth version as 4.2 + EDR. The maximum operational range between the Soundbar and a Bluetooth device is approximately 10 meters (30 feet).
USB Operation Enjoy audio on a USB storage device, such as an MP3 player and USB flash memory, etc. 1 2 3 Insert the USB device. Press the button repeatedly on the unit or press the USB button on the remote control to select USB mode. »» [AUX/USB] LED indicator blinks white. During playback: Button Skip to the previous track Skip to the next track Tips •• This product may not be compatible with certain types of USB storage devices.
Remote Control • Distance/Angle: 6m / 30° • Battery Type: AAA (1.5V X 2) Supported Audio formats Note •• Specifications and design are subject to • • Bluetooth •• Bluetooth Profiles: A2DP, AVRCP •• Bluetooth Version: 4.2 + EDR •• Frequency Band/Output Power: 2400 MHz ~ 2483.5 MHz / ≤ 5dBm Amplifier Section HDMI ARC Dolby Digital, Dolby Digital plus, LPCM 2ch change without notice.
6 Trouble shooting Warning •• Risk of electric shock. Never remove the casing of the product. To keep the warranty valid, never try to repair the product yourself. If you have problems using this product, check the following points before you request service. If you still have a problem, get support at www.philips.com/support. Main unit The buttons on the main unit do not work. • Disconnect form the power supply for a few minutes,then connect again.
Aim the remote control directly at the sensor on the front of the unit. This is a 15 mins power off function, one of the ERPII standard requirement for saving power • When the unit’s external input signal level is too low, the unit will be turned off automatically in 15 minutes. Please increase the volume level of your external device.
Specifications are subject to change without notice. Please visit www.philips.com/support for the latest updates and documents. Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V. and are used under license. This product has been manufactured by and is sold under the responsibility of MMD Hong Kong Holding Limited. or one of its affiliates, and MMD Hong Kong Holding Limited. is the warrantor in relation to this product.
