Soundbar Speaker User manual 5000 series TAB5305 Register your product and get support at www.philips.
Contents 1 Important 2 Help and support Important safety instructions Care for your product Care of the environment Compliance What’s in the Box 2 2 4 4 4 4 2 Your SoundBar Main unit Remote control Connectors 3 Connect Placement Connect the SoundBar and Subwoofer Pair the Subwoofer manually Connect audio from TV and other devices 4 Use your SoundBar Adjust the volume MP3 player Play audio through Bluetooth Auto standby Apply factory settings Update software 5 5 5 6 7 7 7 8 8 10 10 10 11 11 11 11
1 Important Read and understand all instructions before you use your product. If damage is caused by failure to follow instructions, the warranty does not apply. • • Help and support For extensive online support, visit www.philips.com/support to: • download the user manual and the quick start guide watch video tutorials (available only for selected models) • find answers to frequently answered questions (FAQs) • email us a question • chat with our support representative.
• • • • • • • • Install all batteries correctly, + and as marked on the unit. • Do not mix batteries (old and new or carbon and alkaline, etc.). • Remove batteries when the unit is not used for a long time. • The batteries shall not be exposed to excessive heat such as sunshine, fine or the like. • Perchlorate Material - special handling may apply. See www. dtsc.ca.gov/hazardouswaste/ perchlorate. The product/remote control may contain a coin/button type battery, which can be swallowed.
Care for your product Compliance Use only microfiber cloth to clean the product. This product complies with the radio interference requirements of the European Community. Hereby, TP Vision Europe B.V. declares that this product is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU. You can find the Declaration of Conformity on www.p4c.philips.com.
2 Your SoundBar Congratulations on your purchase, and welcome to Philips! To fully benefit from the support that Philips offers, register your SoundBar at www.philips.com/welcome. Main unit This section includes an overview of the main unit. • Light up blue when you switch to Bluetoothmode and Bluetooth devices are paired. • Light up yellow when you switch to optical input source. • Light up purple when you switch to HDMI (ARC) imput source.
• (Standby-On) Switch the SoundBar on or to standby. Volume + • Increase volume. Connectors This section includes an overview of the connectors available on your SoundBar. • Skip to the previoustrack in Bluetooth mod. Play buttons • : Play, pause or resume play in Bluetooth mode. BT/PAIR • Press to switch to the Bluetooth mode. • Press and hold to the disconnect the currently connected Bluetooth device and start a new pairing.
3 Connect Connect the SoundBar and Subwoofer This section helps you connect your SoundBar to a TV and other devices. For information about the basic connections of your SoundBar and accessories, see the quick start guide. Note • For identification and supply ratings, refer to the type plate at the back or bottom of the product. • Before you make or change any connections, make sure that all devices are disconnected from the power outlet. Placement Place your SoundBar and Subwoofer as shown below.
Pair the Subwoofer manually • 1. If no audio is heard from the Subwoofer or the Subwoofer's indicator does not show Blue, follow the following steps to reset and pair up the subwoofer again: Connect audio from TV and other devices Option 1: Connect audio through a digital optical cable Best quality audio Power off the Subwoofer and power on the SoundBar. 2. Long press the "SOURCE" button on the Soundbar for 5 seconds to initiate automatic search. 3.
Option 2: Connect audio through a 3.5mm stereo audio cable Option 3: Connect to HDMI (ARC) Socket Your Soundbar supports HDMI with Audio Return Channel (ARC). If your TV is HDMI ARC compliant, you can hear the TV audio through your Soundbar by using a single HDMI cable. 1 Using a High Speed HDMI cable, connect the HDMI OUT (ARC)-TO TV connector on your Soundbar to the HDMI ARC connector on the TV. • 1 Using a 3.
4 Use your SoundBar This section helps you use the SoundBar to play audio from connected devices. Before you start • Make the necessary connections described in the Quick Start Guide or download the User Manual from www.philips.com/support. • Switch the SoundBar to the correct source for other devices. Adjust the volume 1 Press +/- (Volume) to increase or decrease a volume level. • To mute sound, press . • To restore the sound, press again or press +/- (Volume).
Play audio through Bluetooth Through Bluetooth, connect the SoundBar with your Bluetooth device (such as an iPad, iPhone, iPod touch, Android phone, or laptop), and then you can listen to the audio files stored on the device through your SoundBar speakers. What you need • A Bluetooth device which supports Bluetooth profile A2DP and AVRCP, and with Bluetooth version 4.2 or above. • The operational range between the SoundBar and a Bluetooth device is approximately 4 meters (13 feet).
5 Wall mount Note 6 Product specifications • Improper wall mounting may result in accident, injury or damage. If you have any query, contact Consumer Care in your country. • Before wall mounting, make sure the wall can support the weight of your SoundBar. Screw length/diameter Depending on the type of wall mounting your SoundBar, make sure that you use screws of a suitable length and diameter. Note • Specifications and design are subject to change without notice. Amplifier • • • 3.0-3.5mm/0.12"-0.
Main unit Soundbar • Power supply: 100-240 V~, 50/60 Hz • Power consumption: 15V/1.6A • Standby power consumption: ≤ 0.5 W • Dimensions (W x H x D): 900 x 65.5 x 91 mm • Weight: 1.53 kg • Built-in speakers: 2 x full range (52 mm/2", 4 ohm) Subwoofer • Power supply: 100-240 V~, 50/60 Hz • Power consumption: 20 W • Standby power consumption: ≤ 2 W • Dimensions (W x H x D): 150 x 225 x 267 mm • Weight: 2.1 kg • Built-in speakers: 1 x low frequency (118 mm/4.
Bluetooth A device cannot connect with the SoundBar. • The device does not support the compatible profiles required for the SoundBar • You have not enabled the Bluetooth function of the device. See the user manual of the device on how to enable the function. • The device is not correctly connected. Connect the device correctly, (see 'Play audio through Bluetooth' on page 10) • The SoundBar is already connected with another Bluetooth device. Disconnect the connected device, then try again.
Specifications are subject to change without notice. Please visit www.philips.com/support for the latest updates and documents. Philips and Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V. and are used under license. This product has been manufactured by and is sold under the responsibility of MMD Hong Kong Holding Limited, or one of its affiliates, and MMD Hong Kong Holding Limited, is the warrantor in relation to this product. TAB5305_12_UM_V1.
