Soundbar Speaker User manual 5000 series TAB5105 Register your product and get support at www.philips.
Contents 1 Important 2 Help and support Important safety instructions Care for your product Care of the environment Compliance What’s in the Box 2 2 4 4 4 4 2 Your SoundBar Main unit Remote control Connectors 3 Connect Placement Connect the SoundBar Connect audio from TV and other devices 4 Use your SoundBar Adjust the volume MP3 player Play audio through Bluetooth Auto standby Apply factory settings Update software 5 5 5 6 7 7 7 8 9 9 10 10 11 11 11 5 Wall mount 11 6 Product specifications
1 Important • Read and understand all instructions before you use your product. If damage is caused by failure to follow instructions, the warranty does not apply. Help and support For extensive online support, visit www.philips.com/support to: • download the user manual and the quick start guide watch video tutorials (available only for selected models) • find answers to frequently answered questions (FAQs) • email us a question • chat with our support representative.
• • • • • • • • Do not mix batteries (old and new or carbon and alkaline, etc.). • Remove batteries when the unit is not used for a long time. • The batteries shall not be exposed to excessive heat such as sunshine, fine or the like. • Perchlorate Material - special handling may apply. See www. dtsc.ca.gov/hazardouswaste/ perchlorate. The product/remote control may contain a coin/button type battery, which can be swallowed.
Care for your product Compliance Use only microfiber cloth to clean the product. This product complies with the radio interference requirements of the European Community. Hereby, TP Vision Europe B.V. declares that this product is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU. You can find the Declaration of Conformity on www.p4c.philips.com.
2 Your SoundBar Congratulations on your purchase, and welcome to Philips! To fully benefit from the support that Philips offers, register your SoundBar at www.philips.com/welcome. Main unit • Light up yellow when you switch to optical input source. • Light up purple when you switch to HDMI (ARC) imput source. • Blink red when you increase or decrease volume, solid red when you maximize or minimize volume. • Blink red at a low rate when you mute the soundbar.
• (Standby-On) Switch the SoundBar on or to standby. Volume + • Increase volume. Connectors This section includes an overview of the connectors available on your SoundBar. • Skip to the previoustrack in Bluetooth mod. Play buttons • : Play, pause or resume play in Bluetooth mode. BT/PAIR • Press to switch to the Bluetooth mode. • Press and hold to the disconnect the currently connected Bluetooth device and start a new pairing.
3 Connect Connect the SoundBar This section helps you connect your SoundBar to a TV and other devices. For information about the basic connections of your SoundBar and accessories, see the quick start guide. Note • For identification and supply ratings, refer to the type plate at the back or bottom of the product. • Before you make or change any connections, make sure that all devices are disconnected from the power outlet. Placement Place your SoundBar as shown below.
Connect audio from TV and other devices Option 2: Connect audio through a 3.5mm stereo audio cable Basic quality audio Option 1: Connect audio through a digital optical cable Best quality audio 1 1 Using an optical cable, connect the OPTICAL connector on your SoundBar to the OPTICAL OUT connector on the TV or other device. • The digital optical connector might be labeled SPDIF or SPDIF OUT. NOTE: The TV audio output must be set to PCM. 8 EN Using a 3.
Option 3: Connect to HDMI (ARC) Socket Your Soundbar supports HDMI with Audio Return Channel (ARC). If your TV is HDMI ARC compliant, you can hear the TV audio through your Soundbar by using a single HDMI cable. 4 Use your SoundBar This section helps you use the SoundBar to play audio from connected devices. Before you start • Make the necessary connections described in the Quick Start Guide or download the User Manual from www.philips.com/support.
MP3 player Play audio through Bluetooth Connect your MP3 player to play your audio files or music. Through Bluetooth, connect the SoundBar with your Bluetooth device (such as an iPad, iPhone, iPod touch, Android phone, or laptop), and then you can listen to the audio files stored on the device through your SoundBar speakers. What you need • An MP3 player • A 3.5mm stereo audio cable. 1 Using the 3.
Note • The music streaming may be interrupted by obstacles between the device and Sound Ban such as wall, metallic casing that covers the device, or other devices nearby that operate in the same frequency. • If you want to connect your SoundBar wrth another Bluetooth device, press and hold on the remote control to disconnect the currently connected Bluetooth device.
6 Product specifications Note • Specifications and design are subject to change without notice. Amplifier • • • • • RMS total output power: 30W RMS (+/- 0.5 dB, 10% THD) Frequency response: 50 Hz-15 kHz / ±3 dB Signal-to-noise ratio: > 65 dB (CCIR) / (A-weighted) Total Harmonic Distortion: <1% Input sensitivity: • LINE IN: 500 mV +/-50 mV Bluetooth • • • 12 Bluetooth profiles: A2DP, AVRCP Bluetooth version: 4.
7 Troubleshooting Warning • Risk of electric shock Never remove the casing of the product. To keep the warranty valid, never try to repair the product yourself. If you have problems using this product, check the following points before you request service. If you still have a problem, get support at www.philips.com/support. Main unit The buttons on the SoundBar do not work. • Disconnect the SoundBar from the power supply for a few minutes, then reconnect. Sound No sound from SoundBar speakers.
Specifications are subject to change without notice. Please visit www.philips.com/support for the latest updates and documents. Philips and Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V. and are used under license. This product has been manufactured by and is sold under the responsibility of MMD Hong Kong Holding Limited, or one of its affiliates, and MMD Hong Kong Holding Limited, is the warrantor in relation to this product. TAB5105_12_UM_V1.
