Headphones 4000 Series TAA4205 User manual Register your product and get support at www.philips.
Contents 1 Important safety instructions 2 Hearing Safety General information 2 2 2 Your Bluetooth in-ear headphones 3 What's in the box Other devices Overview of your Bluetooth wireless headset 3 Get started Charge the battery Pair the headphones with your mobile phone 4 Use your headphones Connect the headphones to a Bluetooth device Heart rate monitor Download Philips Headphones app Control your headset 3 3 3 5 5 5 6 6 6 6 6 5 Technical data 8 6 Notice 9 Declaration of conformity Disposa
1 Important safety instructions General information To avoid damage or malfunction: Caution Do not expose headphones to excessive heat Do not drop your headphones. Headphones shall not be exposed to dripping or splashing. Do not allow your headphones to be submerged in water. Do not use any cleaning agents containing alcohol, ammonia, benzene, or abrasives. If cleaning is required use a soft doth, if necessary dampened with a minimum amount of water or diluted mild soap, to clean the product.
2 Your Bluetooth in-ear headphones Congratulations on your purchase, and welcome to Philips! To fully benefit from the support that Philips offers, register your product at www.philips.com/welcome. With this Philips in-ear headphones, you can: • enjoy convenient wireless handsfree calls; • enjoy and control wireless music; • switch between calls and music.
Overview of your Bluetooth wireless headset - Volume control button Multi-function buttons + Volume control button Heart rate button LED indicator Micro USB charging slot
3 Get started Charge the battery Note charge the battery for 3 hours for optimum battery capacity and lifetime. Use only the original USB charging cable to avoid any damage. Finish your call before charging the headset, as connecting the headset for charging will Connect the supplied USB charging cable to: • • The micro USB charging slot on the headphones and; The charger/USB port of a computer. LED turns white during charging and turns off when the headphones in fully charged.
4 Use your headset Connect the headset to your Bluetooth device Turn on your mobile phone/ Bluetooth device. Press and hold Multi-function button to turn the headphones on The blue LED flashes. The headphones are reconnected to the last connected mobile phone/ Bluetooth device automatically. If the last one is not available, the headphones try to reconnect to the second last connected device.
Control your headset Power on/off Button Task Turn the headphones on. Turn the headphones off. Operation Press and hold for 2 seconds. Press and hold for 4 seconds. Music control Task Play or pause music. Button Operation Press once. Press once. Long press. Long press. Adjust volume. Next track. Previous track. Other headphones indicator status Headphones status The headphones are connected to a Bluetooth device, while the headphones in standby mode or while you are listening to music.
5 Technical data Headset Music time: 6 hours Talk time: 8 hours Standby time: 160 hours Charging time: 2 hours Rechargeable lithium polymer battery (140 mAh) Bluetooth version: 5.0 • A2DP (Advanced Audio Distri- • AVRCP (Audio Video Remote Frequency range: 2.402-2.480 GHz Transmitter power: < 10 dBm (Only for EU) Operating range: Up to 10 meters (33 feet) Digital echo & noise reduction Note notice.
6 Notice Declaration of conformity Remove the integrated battery Hereby, MMD Hong Kong Holding Limited declares that this product is in compliance with the essential requirements and other relevant provisions of Directive If there is no collection/recycling system for electronic products in your country, you can protect the environment by removing and recycling the battery before disposing the headphones. • Make sure the headset is disconnected from the charging case before removing the battery.
Notice of compliance The device complies with the FCC rules, Part 15. Operation is subject to the following two conditions: 1. This device may not cause harmful interference, and 2. This device must accept any interference received, including interference that may cause undesired operation. FCC rules This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
7 Frequently asked questions My Bluetooth headset does not turn on. The battery level is low. Charge the headset. I cannot pair my Bluetooth headset with my Bluetooth device. The Bluetooth is disabled. Enable the Bluetooth feature on your Bluetooth device and turn on the Bluetooth device before you turn on the headset. The Heartrate monitoring function does not work.
Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V. and are used under license. This product has been manufactured by and is sold under the responsibility of MMD Hong Kong Limited is the warrantor in relation to this product. UM_TAA4205_00_EN_V1.
