User manual

4 Remove the shaving heads from the shaving
head holder.
Discard the used shaving heads immediately to
avoid mixing them with the new shaving heads.
5 Place the new shaving heads in the shaving
head holder.
Note: Make sure the notches on both sides of
the shaving heads fit exactly onto the
projections in the shaving head holder.
2
1
6 Postavite pričvrsni prsten na reznu glavu i
okrenite ga u smjeru kazaljki kako biste ga
pričvrstili. Ponovite ovaj postupak za preostale
pričvrsne prstenove.
- Svaki pričvrsni prsten ima dva udubljenja koja
tačno naliježu na ispupčenja na držaču reznih
glava. Okrećite prsten u smjeru kazaljki dok ne
začujete škljocanje koje označava da se prsten
pričvrstio.
1
Note: Hold the shaving head holder in your
hand when you reinsert the shaving heads and
reattach the retaining rings. Do not place the
shaving head holder on a surface, as this may
cause damage to the shaving heads.
66
Crnogorski