Always there to help you Register your product and get support at www.philips.
Contents 1 Important 2 Safety Notice 2 2 2 Your audio adapter Introduction What's in the box What else you need 3 Overview of the main unit 4 4 4 4 8 Product information Specifications 20 20 9 Troubleshooting 21 10 Appendix: Understand meanings of LED colors 22 5 4 Prepare 6 Download SpeakerSet Multiroom Manager to your iOS or Android device 6 Connect to your audio system 6 Connect power and switch on 7 5 Connect SW100M to your home Wi-Fi network Option 1: Set up through an iOS device Optio
1 Important Safety • Only use attachments/accessories specified by the manufacturer. • Use only power supplies listed in the user manual. • The product shall not be exposed to dripping or splashing. • Do not place any sources of danger on the product (e.g. liquid filled objects, lighted candles). • Where the mains plug or an appliance coupler is used as the disconnect device, the disconnect device shall remain readily operable. Warning •• Never remove the casing of this apparatus.
Your system consists of materials which can be recycled and reused if disassembled by a specialized company. Please observe the local regulations regarding the disposal of packaging materials, exhausted batteries and old equipment. Trademark notice iPad, iPhone, iPod, iPod classic, iPod nano and iPod touch are trademarks of Apple Inc., registered in the U.S. and other countries. Lightning is a trademark of Apple Inc. Android is a trademark of Google Inc.
2 Your audio adapter Congratulations on your purchase, and welcome to Philips! To fully benefit from the support that Philips offers, register your product at www.philips.com/welcome. If you contact Philips, you will be asked for the model and serial number of this apparatus. The model number and serial number are on the bottom of the apparatus. Write the numbers here: Model No. __________________________ Serial No.
3 Overview of the main unit a b c g OPTICAL OUT • Connect the audio adapter to your audio system through an optical cable (not supplied). h COAX OUT • Connect the audio adapter to your audio system through a coaxial cable (not supplied). i AUX OUT • d Connect the audio adapter to your audio system through RCA audio cables (red/white; not supplied). j DC IN • j Connect the power adapter. i h gf e / a • Skip to the previous/next song. • Start or pause music play. b c -/+ • Adjust volume.
4 Prepare 2 On the initial setup page, tap Setup a new speaker. Always follow the instructions in sequence. Download SpeakerSet Multiroom Manager to your iOS or Android device 1 (For iPod touch/iPhone/iPad users) Install SpeakerSet from Apple App Store, and then run the app.
Option 2: Connect through COAXIAL OUT Connect power and switch on Caution •• Risk of product damage! Make sure that the power supply voltage matches the voltage printed on the bottom of the audio adapter. •• Risk of electric shock! When you unplug the AC adapter, always pull the plug from the socket. Never pull the cord. •• Before you connect the AC adapter, make sure that you have completed all the other connections. • Note •• Make sure that no cable is plugged in the AUX OUT sockets.
5 Connect SW100M to your home WiFi network To connect the audio adapter to your existing home Wi-Fi network, you need to apply your home Wi-Fi settings to the audio adapter in one of the following ways (depending on the type of your smart device and whether your Wi-Fi router is WPS enabled): Devices required for speaker setup iOS device + Wi-Fi router Android device + Wi-Fi router WPS Wi-Fi router PC/Mac with Wi-Fi enabled + Wi-Fi router 8 EN Setup method Choose option 1 (see 'Option 1: Set up through a
Option 1: Set up through an iOS device 1 Before setup, make sure that your iOS device is connected to your home Wi-Fi network. 2 As instructed on the app, press and hold SETUP on the back of the audio adapter for more than 3 seconds. »» Both the system status indicator on the front panel and the Wi-Fi status indicator on the SETUP button turns solid amber. 3 Tap Next on the above app screen, and then read how to proceed with network setup. 4 Select Wireless (Wi-Fi) under HOW DO YOU WANT TO CONNECT?.
Option 2: Set up through an Android device 1 2 10 Before setup, make sure that your Android device is connected to your home Wi-Fi network. As instructed on the app, press and hold SETUP on the back of the audio adapter for more than 3 seconds. »» Both the system status indicator on the front panel and the Wi-Fi status indicator on the SETUP button turns solid amber. EN 3 Tap Next on the above app screen, and then read how to proceed with network setup.
Option 3: Set up wireless connection to a WPS router directly 1 2 Press the WPS button on your home Wi-Fi router. WPS As instructed on the app, press and hold WPS on the back of the audio adapter for more than 3 seconds. »» The Wi-Fi status indicator on the WPS button blinks green. 3 Wait until successful connection of the speaker to your home Wi-Fi network. »» The Wi-Fi status indicator on the WPS button turns off. »» The system status indicator on the front panel turns solid green.
Option 4: Set up through a PC/Mac (advanced) 1 2 Go to your Wi-Fi enabled PC/Mac. 3 Select :) Philips Setup from the list of available Wi-Fi networks on your PC/Mac. 4 After successful connection, open a web browser on your PC/Mac. 5 Enter http://philips.speakers or 172.24.0.1 at the address bar and click the Enter key. 6 Make changes on the setup page and confirm your settings. »» The Wi-Fi status indicator on the SETUP button turns off.
6 Play 3 Tap the Connect icon screen. 4 Select the audio adapter for music streaming. on the play Enjoy Spotify music services through SW100M Note •• With Spotify, you can enjoy unlimited music on your new device. Thanks to the Spotify Connect feature, you can play and control all this music wirelessly. Choose music on your mobile or tablet, and hear it on your brand new device. •• Make sure that the audio adapter is connected to your home Wi-Fi network with Internet connection available.
During play, you can: • press on the audio adapter to pause/resume music play. • press / on the audio adapter to skip to the previous/next song. • press +/- on the audio adapter to adjust volume level. Tip •• See the SpeakerSet app screen for more advanced settings. •• You can take your iOS or Android device away from the network, or even switch it off. In this case, Spotify music will continue to play on your audio adapter.
4 Tick circles beside the speakers/audio adapters to add them into the group. 5 Tap beside the group name to enter the edit page. 6 Edit the group name as you like on the edit page. 7 Tap the check mark at the top right on the above app screen, and then wait for more than 10 seconds until the grouping finishes. To ungroup speakers: 1 2 Tap beside the master speaker. Untick the box beside the speaker/audio adapter to be removed from the group.
Enjoy music streamed to the group speakers/audio adapters 1 On the home page, tap the icon of the master speaker on the SpeakerSet app screen. 2 Tap Go Spotify app to play music to switch to the Spotify app. 3 4 Log in to your Spotify premium account. 5 Select and play your favorite music from the Spotify app. »» You can enjoy music streamed to all speakers/audio adapters in the same group at the same time. 16 EN Tap the Connect icon master speaker.
To adjust volume of an individual speaker/audio adapter: • Press +/- on the top panel of the speaker/ audio adapter. • Open the SpeakerSet app, then move the slider beside the speaker/audio adapter on the above volume adjustment page directly. To play/pause music play: • on the top panel of any speaker/ Press audio adapter in the group or use controls on the Spotify app screen directly.
7 Other features 5 Tap Factory reset to enter the factory reset page. 6 Tap Yes to reset your audio adapter. Restore factory settings In some cases, you may need to reset the audio adapter, for example, when you need to reset the Wi-Fi settings or log out from the current Spotify premium account. 1 Make sure that the audio adapter is powered on and connected to the same Wi-Fi network as your smartphone or tablet. 2 Make sure that your home Wi-Fi network is connected to the Internet.
Update software 5 Tap Software update to enter the software update page. 6 Tap Check online to see whether any new version of software is available. 7 If a new version is available, tap Update to start software update. »» The system status indicator on the front panel blinks amber and red alternately during this process. 8 Wait until the software update process finishes, then tap OK to reboot the audio adapter.
8 Product information •• Product information is subject to change without prior notice. Specifications Audio output Output Voltage Signal to Noise Ratio Total Harmonic Distortion 1000 mV RMS > 62 dBA < 2% Wireless Frequency range WPS PBC (one button push) 20 EN AC power PHILIPS SWITCHING POWER SUPPLY Note Wireless standard Wireless security General information 802.
9 Troubleshooting Warning •• Never remove the casing of this apparatus. To keep the warranty valid, never try to repair the system yourself. If you encounter problems when using this apparatus, check the following points before requesting service. If the problem remains unsolved, go to the Philips web site (www. philips.com/welcome). When you contact Philips, ensure that the apparatus is nearby and the model number and serial number are available.
10 Appendix: Understand meanings of LED colors 1 solid green 1 1 blinking green quickly 1 blinking green slowly 1 1 a 1 1 dimmed by 50% in solid green 1 1 solid red 1 blinking red 1 c 1 b 1 a System status indicator (on the front panel) 1 b SETUP indicator (on the back panel) c WPS indicator (on the back panel) LED colors 1 1 and 2 indicators in solid amber 2 1 blinking amber quickly, and 3 blinking green 1 1 22 LED behavior No light 1 blinking amber slowly 1 blinking amber quickly
Open Source Declaration for Philips SW700M/SW750M/SW100M ALAC FLAC Iperf jQuery JSBN 1.2 Jungo USB DFU Driver Marvell WPS2 Client mDNSResponder OpenSSL RSA MD5 zlib getopt Mongoose Tremor ALAC http://alac.macosforge.org/ The Apple Lossless Audio Codec sources are available under the Apache license. Details can be found here http://www.apache.org/licenses/LICENSE-2.0. FLAC https://xiph.org/flac/license.
The reference implementation libraries are licensed under the New BSD License. In simple terms, these libraries may be used by any application, Open or proprietary, linked or incorporated in whole, so long as acknowledgement is made to Xiph.org Foundation when using the source code in whole or in derived works.
Neither the names of the University of Illinois, NCSA, nor the names of its contributors may be used to endorse or promote products derived from this Software without specific prior written permission. THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.
* without limitation the rights to use, copy, modify, merge, publish, * distribute, sublicense, and/or sell copies of the Software, and to * permit persons to whom the Software is furnished to do so, subject to * the following conditions: * * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software.
http://www.opensource.apple.com/source/mDNSResponder/mDNSResponder-320.10.80/ The majority of the source code in the mDNSResponder project is licensed under the terms of the Apache License, Version 2.0, available from:
* the merchantability of this software or the suitability of this * software for any particular purpose. It is provided "as is" * without express or implied warranty of any kind. * * These notices must be retained in any copies of any part of this * documentation and/or software. Zlib http://www.zlib.net/ /* zlib.h -- interface of the 'zlib' general purpose compression library version 1.2.
Mongoose https://github.com/cesanta/mongoose/ Mongoose is released under commercial and GNU GPL v.2 open source licenses. The GPLv2 open source License does not generally permit incorporating this software into non-open source programs. For those customers who do not wish to comply with the GPLv2 open source license requirements,Cesanta Software offers a full, royalty-free commercial license and professional support without any of the GPL restrictions. Tremor http://wiki.xiph.org/index.
2015 © WOOX Innovations Limited. All rights reserved. Philips and the Philips’ Shield Emblem are registered trademarks of Koninklijke Philips N.V. and are used by WOOX Innovations Limited under license from Koninklijke Philips N.V. SW100M_UM_10_V2.
