User manual

5EN
3 Connect and set
up
This section helps you connect your wireless
subwoofer to a Philips branded TV, and then set
it up.
For information about the basic connections
of your wireless subwoofer, see the quick start
guide.
Note
• Foridenticationandsupplyratings,seethetypeplate
at the back or bottom of the product.
• Before you make or change any connections, make sure
that all devices are disconnected from the power outlet.
Place subwoofer
See the quick start guide on how to place the
wireless subwoofer .
1 PlaceSUB100ontheoor.
• If you place the subwoofer vertically,
install the supplied foot stand to
prevent instability of the subwoofer.
• Place the subwoofer at least 1 meter
(3 feet) away from your TV, and
10 centimeters away from the wall.
Pair up with the TV
Note
• The wireless subwoofer can pair with a Philips branded
TV.
• The maximum distance between the TV and the
wireless subwoofer is 5 meters.
Forthersttimeuse,manuallypairthewireless
subwoofer with the TV.
1 Plug in the provided USB dongle to the TV.
2 Switch on the subwoofer.
3 Press and hold CONNECT (connect)
button on the subwoofer to enter the
pairing mode.
» The indicator on the subwoofer blinks
white quickly.
4 Switch on the TV and enter (home
menu).
5 Select [Setup] (setup) and press [OK]
(ok).
6 Select [TV settings] (TV settings) >
[Sound] (Sound) > [Wireless sound]
(Wireless sound) > [Add new speaker]
(Add new speaker).
7 Follow the instructions on screen and pair
the wireless subwoofer with the TV and
the TV will store the connection.
» If the pairing succeeds, the indicator on
the subwoofer lights up white.
» If the pairing fails, the indicator on the
subwoofer blinks white slowly.
8 If the pairing fails, repeat steps above.
Subwoofer settings
Compared with the volume of the TV, you can
slightly increase or decrease the volume of the
subwoofer.
1 On the TV, enter (home menu).
2 Select [Setup] (setup) and press [OK]
(ok).
3 Select [TV settings] (TV settings) >
[Sound] (sound) > [Wireless sound]
(wireless sound) > [Audio output offset]
(audio output offset).
4 Use the up / down keys to adjust.