Always there to help you Register your product and get support at www.philips.
Contents 1 Important Safety Notice 2 2 3 2 Your Docking Entertainment System 5 Introduction What's in the box Overview of the main unit Overview of the remote control 3 Get started Connect power Prepare the remote control Set clock Turn on 4 Play Play disc Play from USB Skip to a track Pause/resume play Search within a track Display play information Select repeat/shuffle play options Program tracks 5 5 6 7 8 8 9 9 9 10 10 10 10 10 10 11 11 11 5 Adjust sound 12 12 12 12 12 6 Play iPod/iPhone/iPad
1 Important Care for your product • • Safety Warning •• Never remove the casing of this apparatus. •• Never lubricate any part of this apparatus. •• Never place this apparatus on other electrical • • Do not insert any objects other than discs into the disc compartment. Do not insert warped or cracked discs into the disc compartment. Remove the discs from the disc compartment if you are not using the product for an extended period of time. Only use microfiber cloth to clean the product. equipment.
negative consequences for the environment and human health. Before you replace the plug cover, make sure that the cord grip is clamped over the sheath of the cable and not just over the two wires in the cable. Copyright in the U.K. Your product contains batteries covered by the European Directive 2006/66/EC, which cannot be disposed with normal household waste.
has been designed to connect specifically to iPod, iPhone, or iPad, respectively, and has been certified by the developer to meet Apple performance standards. Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards. Please note that the use of this accessory with iPod, iPhone, or iPad may affect wireless performance. iPod and iPhone are trademarks of Apple Inc., registered in the U.S. and other countries. iPad is a trademark of Apple Inc.
2 Your Docking Entertainment System Congratulations on your purchase, and welcome to Philips! To fully benefit from the support that Philips offers, register your product at www.philips.com/welcome.
Overview of the main unit m a b c d e f l k j i h g q p n o a / / • Skip to the previous/next track. • Search within a track. • Tune to a radio station. b PRESET/ALBUM+/• Select a preset radio station. • Skip to the previous/next album. • Adjust hour/minute digits. c • Turn on the system, switch to standby mode. d STOP/MENU • Stop play. • Access iPod/iPhone or DAB menu. e MODE/SCAN • Select repeat/shuffle mode. • Search FM/DAB radio stations.
q AUDIO IN • Connect to an external audio device. d Overview of the remote control e a b BLUETOOTH CD c d TUNER PRESET/ALBUM e DAB s ENTER f MP 3 LINK g r USB DISPLAY h i j MENU q RDS VOL 2 3 4 5 6 7 8 9 l PROG/ CLOCK SET 0 MODE/ SCAN p m SLEEP/ TIMER DSC DBB o / • • Navigate in the iPod/DAB menu. Skip to the previous/next album. Skip to the previous/next preset station. Select 12 hour or 24 hour format. Adjust hour/minute digits.
p MODE/SCAN • Select repeat/shuffle play mode. • Search FM/DAB radio stations. q • • /MENU Stop play. Access iPod or DAB menu. r iPod/iPhone • Select iPod/iPhone source. s DAB/TUNER • Select DAB/tuner source. 3 Get started Caution •• Use of controls or adjustments or performance of procedures other than herein may result in hazardous radiation exposure or other unsafe operation. Always follow the instructions in this chapter in sequence.
Prepare the remote control Set clock Caution Note •• Risk of explosion! Keep batteries away from heat, sunshine, or fire. Never discard batteries in fire. To insert the remote control battery: 1 2 Open the battery compartment. 3 Close the battery compartment. •• You can set the clock in the standby mode only. 1 In standby mode, press and hold PROG/ CLOCK SET to activate the clock setting mode. »» SET CLOCK is displayed. »» The 12 hour or 24 hour format is displayed. 2 Press / format.
4 Play Play disc 1 2 Press CD to select the disc source. Insert a disc into the disc compartment with the printed side facing up. »» Play starts automatically. • • • Press Press Press to access a folder. / to select a file. to start play. Skip to a track For CD: Play from USB 1 Note •• Ensure that the USB storage device contains playable audio content. 1 Connect the USB storage device into the socket. 2 Press USB to select the USB source. »» The total number of playable tracks is displayed.
Display play information Program tracks 1 You can program a maximum of 20 tracks. During play, press DISPLAY repeatedly to select different play information. Select repeat/shuffle play options To select repeat play mode: 1 During play, press MODE repeatedly to select a repeat option. »» [Rep one]: plays the current track continuously. »» [Rep all]: repeats the entire disc/ programme. To select shuffle play mode: 1 • During play, press MODE repeatedly to select the shuffle play mode.
5 Adjust sound 6 Play iPod/ iPhone/iPad Adjust volume This system is equipped with a dock for iPod/ iPhone/iPad. You can enjoy audio from the docked system through the powerful speakers. During play, press VOL +/- to increase/decrease the volume. Select a preset sound effect 1 During play, press DSC repeatedly to select: • [POP] (pop) • [JAZZ] (jazz) • [CLASSIC] (classic) • [ROCK] (rock) Enhance bass 1 During play, press DBB to turn dynamic bass enhancement on or off.
7 Listen to radio An application Philips DigitalRadio is available on Apple App Store and Google Play. To fully enjoy features of this product, download and install the application to your smart device. Note •• The application is compatible with iPod touch, iPhone and iPad with iOS 4.3 or above. Charge the iPod/iPhone/iPad When the system is connected to power, the docked iPod/iPhone/iPad begins to charge. Note •• In Eco power standby mode, iPod/iPhone/iPad cannot be charged.
Tune to DAB radio station manually Scan for new DAB stations 1 In DAB mode, press / repeatedly until your desired station name displays. 2 Press ENTER to confirm the selection. »» The radio immediately tunes to the selected station. About station display symbols New stations and services will be regularly added in the DAB broadcast. To make new DAB stations and service available on your DAB radio, a search is needed.
[DRC] [Prune] [System] • • • 3 4 To select an option, press ENTER. Repeat step 2-3 if sub-option is available under one option. There are three levels of compensation: • [DRC Off]: No compensation applied. (the default) • [DRC Low]: Maximum compensation applied. • [DRC High]: Medium compensation applied. Full scan 1 Full scan is used to perform a wide range of DAB radio search. In DAB mode, press MENU to enter the menu options. 2 Press / displays. 3 Press ENTER to enter the sub-menu.
Listen to FM radio Tune to a radio station 1 2 Note •• To overwrite a programmed station, store another station in its place. Press TUNER to select FM. Press / to tune to a specific frequency. »» Play starts automatically. Select a preset radio station 1 Tip / to select a Tip •• You can press MODE/SCAN to tune to the next station with strong reception automatically. In tuner mode, press preset number. •• Position the antenna as far as possible from TV, VCR, or other radiation source.
Set RDS clock You can use time signal broadcast together with the RDS signal to set the clock of the unit. 1 Tune to a RDS radio station that transmits time signals. 2 Press and hold MENU. »» [CLK Sync] is displayed. Note •• The accuracy of the transmitted time depends on the RDS station that transmits the time signal. 8 Play audio via Bluetooth With this product, you can stream audio from a Bluetooth player. An application Philips DigitalRadio is available on Apple App Store and Google Play.
»» If the connection succeeds, [BT Connected] is displayed on the LCD display of this product. 3 Play a track on the connected device. • To pause or resume play, press . • To skip to the previous or next track, press / . 9 Other features Set the sleep timer This system can switch to standby automatically after a set period of time. 1 When the system is turned on, press SLEEP repeatedly to select a set period of time (in minutes). »» When sleep timer is activated, is displayed.
5 6 Press 7 Press / to set the minute and press SLEEP/TIMER to confirm. »» The timer is set and activated. »» is displayed. 8 Press / to set the volume and press SLEEP/TIMER to confirm. / to set the hour. Press SLEEP/TIMER to confirm. »» The minute digits begin to blink. Activate and deactivate the alarm timer 1 2 Switch the system to standby mode. Press TIMER repeatedly to activate or deactivate the timer. »» If the timer is activated, is displayed.
10 Product information Note DAB sensitivity - EN50248 Total Harmonic Distortion Signal to Noise Ratio Number of presets <-95 dbm <2% >50 dB 30 (FM) 30 (DAB) •• Product information is subject to change without prior notice. Speakers Speaker Impedance Speaker Driver Sensitivity Specifications 4 ohm 2 X 3" full range >82 dB/m/W Amplifier Rated Output Power Frequency Response Signal to Noise Ratio Aux Input 2X15W RMS 60 Hz - 16 kHz, ±3 dB >65dBA 0.
• • • • Do not use solvents such as benzene, thinner, commercially available cleaners, or antistatic spray intended for analogue records. Clean the disc lens • After prolonged use, dirt or dust may accumulate at the disc lens. To ensure good play quality, clean the disc lens with Philips CD lens cleaner or any commercially available cleaner. Follow the instructions supplied with cleaner.
SOCIAL RELIGION PHONE IN TRAVEL LEISURE JAZZ COUNTRY NATION M OLDIES FOLK M DOCUMENT TES ALARM Social Affairs Religion Phone In Travel Leisure Jazz Music Country Music National Music Oldies Music Folk Music Documentary Alarm Test Alarm 11 Troubleshooting Warning •• Never remove the casing of this apparatus. To keep the warranty valid, never try to repair the system yourself. If you encounter problems when using this apparatus, check the following points before requesting service.
•• •• •• •• •• Before you press any function button, first select the correct source with the remote control instead of the main unit. Reduce the distance between the remote control and the unit. Insert the batteries with its polarities (+/– signs) aligned as indicated. Replace the batteries. Aim the remote control directly at the sensor on the front of the unit. No disc detected •• Insert a disc. •• Check if the disc is inserted upside down.
24 EN
EN 25
26 EN
Specifications are subject to change without notice © 2013 Koninklijke Philips Electronics N.V. All rights reserved. DTB855_10_UM_V1.
