Always there to help you Register your product and get support at www.philips.
Contents 1 Important safety instructions Hearing Safety General information 10 Frequently asked questions 2 2 2 2 Your wireless stethoscope 3 3 4 4 3 Get started 5 5 6 6 4 Use your stethoscope 8 8 8 8 8 8 8 5 LED and sound indication 9 9 9 What's in the box Overview of the stethoscope Overview of the docking station Connect Install the supplied batteries Charge the stethoscope Auto switch on/off Adjust the listening volume Adjust the left/right balance Amplify the environmental sound Equalizer (
1 Important safety instructions General information Caution •• To prevent fire or shock hazard: Always keep this Hearing Safety Danger •• To avoid hearing damage, limit the time you use headphones at high volume and set the volume to a safe level. The louder the volume, the shorter the safe listening time is. Be sure to observe the following guidelines when using your headset. • Listen at reasonable volumes for reasonable periods of time.
2 Your wireless stethoscope What's in the box *Rechargeable lithium-polymer battery Spare ear caps (x 2 pairs) User manual *Philips wireless stethoscope 4XLFN VWDUW JXLGH Docking station Quick start guide Note •• *In packs with two stethoscopes, there are additional stethoscope and battery. Power adapter 3.
Overview of the stethoscope Overview of the docking station a a b c d e f g h i j k l b c a AUDIO IN Audio input b AUDIO IN/OPTICAL IN switch d e f a Ear cap b Wireless/ambient mode indicator c Wireless/ambient mode button d Left/right balance control e Battery f Volume control button c Optical input d ATT (Attenuation of audio input signal) switch e POWER Power the docking station on or off.
3 Get started Caution •• Make sure that you have read the safety instructions in • • connect one side of the supplied RCA adapter to RCA output of the audio device, and another side to the supplied 3.5mm audio cable. Connect the remaining side of the 3.5mm audio cable to the 3.5mm audio input of the docking station. switch to AUDIO IN and ATT to -8dB. the 'Important safety instructions' section before you connect and install your stethoscope. L R Connect 1.
2. Connect the power adapter Install the supplied batteries The first battery Your stethoscope comes with a high quality rechargeable lithium-polymer battery to maximize battery lifetime. Insert/remove the first battery as follows: 3. Adjust the input volume For correct operation, make sure you adjust the stethoscope and your TV (with 3.5mm audio output) to an optimal sound volume level. 1 2 3 On the stethoscope, make sure the volume is set to medium to low level.
Charge the stethoscope Note •• Before using the stethoscope for the first time, charge the supplied battery for 5 hours for optimum battery capacity and lifetime. •• You can charge one stethoscope per each time. •• Normally, a full charge takes 2.5 hours. 1 2 Power on the docking station. Place the stethoscope on the docking station. »» The orange charging LED flashes. If the spare battery is inside the charging slot, the orange charging LED of the spare battery will flash too.
4 Use your stethoscope Auto switch on/off • The stethoscope turns itself on automatically when you wear it on your ears. »» The LED on the stethoscope will turn white and you will hear a short beep. • The stethoscope turns itself off automatically when you take it off from your ears. This saves the battery life.
5 LED and sound indication LED indication Description Battery Docking station Status No charging Charging Charged On Off Charging Equalizer (EQ) Stethoscope LED Off Orange LED flashes. White White LED flashes. Off Orange LED flashes. White White Sound indication Status The stethoscope is on. Low battery level Battery goes out soon. Reach max./min. volume level.
6 Care and maintainence Clean the stethoscope and docking station 1 2 Make sure that the docking station is disconnected from the power source. Use a slightly wet cloth to clean the product gently. Clean the ear caps 1 2 3 Remove the ear caps carefully from the stethoscope. Clean the ear caps with warm soap water. Dry the ear caps thoroughly. Note •• The ear caps need to be replaced for a regular period of time.
7 Accessories Use only the original accessories. You can order extra accessories through the Philips service centers or online stores at www.shop.philips. com for replacement.
8 Technical data General specification and features • Music time: minimum 5 hours • Standby time: up to 7000 hours • Normal time for a full charge: 2.5 hours • Operating range: Up to 50 meters (164 feet) • Optical input/3.5mm input switch • 2.4G RF solution • Auto power on/off • Attenuator on/off • Extra slot for second battery charging • Equalizer (EQ) x 3 Battery • Rechargeable lithium-polymer battery (3.
9 Notice Declaration of conformity Hereby, Gibson Innovations declares that this product is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. You can find the Declaration of Conformity on www.p4c.philips. com. Compliance with EMF This product complies with all applicable standards and regulations regarding exposure to electromagnetic fields. products and batteries.
10 Frequently asked questions I cannot hear any sound. •• Make sure that you connect the power source and adapter correctly (see '1. Connect the audio device' on page 5). •• Make sure that you adjust the volume to an appropriate level. •• Make sure that the batteries are charged and inserted properly to the battery charging slot (see 'Install the supplied batteries' on page 6). •• Check if the LED on the docking station is white. •• Batteries are defective. Purchase new ones with the same specifications.
EN 15
2016 © Gibson Innovations Limited. All rights reserved. This product has been manufactured by, and is sold under the responsibility of Gibson Innovations Ltd., and Gibson Innovations Ltd. is the warrantor in relation to this product. Philips and the Philips’ Shield Emblem are registered trademarks of Koninklijke Philips N.V. and are used under license from Koninklijke Philips N.V. UM_SSC500x_501x_10_EN_V3.
