Register your product and get support at www.philips.
On / Off switch (Rear of Prestigo) - Power button - Home / Setup button - AV button - Volume + / - button - Teletext button (Europe / Australia) Previous channel button (USA) - Mute button - Channel / Program + / – button - Menu button - Back / Exit button - Cursor buttons - OK button - Guide button - Info button Color buttons 3 3 3-6 3-4 4-5 6 6-7 6-7 7-20 7 8-9 9-12 12-13 13-15 15 15-18 18-19 19 19-20 20-22 22 22-24 22 23-24 25 IR receiver USB port (Bottom of Prestigo) Power supply jack EN 2 Table
1.1 What’s in the box During setup you can select yourself the devices you wish to operate with the remote control (see table under chapter 2.2 ‘Setting up the remote control’). The on-screen instructions on the remote control display help you to easily set up and operate the remote control.
• country and slide it over the power plug of the charging cable. When the battery is fully charged the battery full icon ( appears at the top right corner of the screen. ) English 1 Select the adapter plug for your Notes • • 2 Insert the power plug into a wall outlet. 3 Turn the protective cap, covering the connectors, to the left. 4 Insert the plug at the other end of 5 the charging cable into the remote control power supply jack. If desired, set the On / Off switch to the right (On).
Setu p Welc guide ome to th .Th e add de e next ste Prestigo setu ps vices to yo will help p ur SR you T932 0. 3 Follow the on-screen instructions to set up the remote control for all • devices you wish to operate, using the remote control. You can set up the remote control for any of the devices listed below, with a maximum of 20 devices.
1 To exit the initial Setup at any time, 2 • press the HOME button. • The message ‘Do you want to save your settings and exit setup’ appears. Touch the ‘Yes’ button to exit. If you accidentally press the HOME button during initial Setup, you can enter Setup mode again by touching the ‘No’ button. Also refer to chapter 4.1 ‘Entering Setup mode’. Notes • • 3.1 Selecting devices 1 Press the HOME button. • 2 The Home screen appears.
Note If a device does not respond properly to a button command you can have the remote control search for the button function or learn the function from the original remote control. For this refer to chapter 4.7.4.1 ‘Searching the database’ and / or chapter 4.7.4.2 ‘Learning button functions’. 4 4.1 Extra possibilities - Advanced setup English • • buttons (keypad) and the appropriate hard buttons on the remote control. Touch the button to go back to the list of available devices.
When entering setup mode from the devices home screen, you can add, delete, rename and rearrange devices. 1 In the Home screen, touch the ‘Devices’ tab. • The devices for which the remote control is set up are displayed on the screen. Hom e Devic es Activ ities Wat ch TV Listen Wat ch Play 2 Keep the HOME button pressed for to m usic a mov ie 1 In the list of devices, select the device you wish to delete. • The Delete device screen appears. • The Home screen appears.
You can change which volume buttons are used, for instance if you wish to use the volume buttons of the Amplifier to control the volume of the DVD player. 1 In the list of devices, select the device you wish to copy the volume to. 2 Touch the button in the toolbar. • The Edit device screen appears. • The Copy volume screen appears. • The Home screen appears. The volume settings are now copied. 3 Touch the ‘Copy volume buttons’ button. 4 Follow the on-screen instructions.
Example Start Activity macro for ‘Watch DVD’: 1 Turn on TV. - Standard delay of 0.25 seconds is automatically inserted. 2 Turn on DVD. 3 User-defined delay of 10 seconds to wait for the TV to turn on. 4 Select input 1 on TV. Example Stop Activity macro for ‘Watch DVD’: 1 Turn off TV. 2 - Standard delay of 0.25 seconds is automatically inserted. Turn off DVD.
1 In the Home screen, touch the ‘Activities’ tab. • The available activities (if already added) are displayed on the screen. Hom Devic Liste n to Wat ch • 3 seconds. • The Setup toolbar appears. You can now add, delete, rename and rearrange activities. Press the button to exit Setup mode at any time. e a mov ie a gam e 4.3.1 Adding activities English The Delete activity screen appears. • The Setup Activities screen appears. button in the toolbar when finished.
5 • 6 4.3.5 Rearranging activities 1 In the list of activities, touch the activity you wish to rearrange. 2 Touch the button. 3 Use the arrows to move the activity to the preferred position. 4 Touch the button in the toolbar when finished. • 4.4 The last used Activities screen appears. • If a ‘Start Activity’ macro has been set up for the activity, the macro will be executed when selecting the activity in the Home screen.
3 4.5 • Setting up favorites 4 Favorites are your favorite TV and radio channels that you can select and watch / listen with a single button press. 1 In the Home screen, select a device or activity. 2 Touch the ‘Favorites’ tab. • The available favorite channels (if already added) are shown on 1 2 3 the display. 4 Wat ch TV Keyp ad Favo rite s 7 5 8 9 0 3 Keep the HOME button pressed • for 3 seconds. • The Setup toolbar appears. You can now add, delete, rearrange and rename favorites.
5 Touch the ‘OK’ button when finished. 1 In the list of favorites, navigate to the page which contains the favorite 6 2 Keep the HOME button pressed for 3 seconds to enter Setup mode. 3 Select the favorite you wish to edit. 4 Touch the button in the toolbar. 4.5.4 Changing the channel icon 1 In the list of favorites, select the favorite channel for which you wish to 2 3 4 5 6 change the icon. Touch the button in the toolbar. • The Edit favorite screen appears. Touch the ‘Change channel icon’ button.
4.5.6 Rearranging favorites 1 2 3 4 Reconfiguring buttons The remote control is equipped with the most used functions for operating your devices. However, if you miss certain functions from your original remote control, you can add these functions via the Setup menu. In this menu you can also delete, rename and rearrange button functions and repair buttons that do not function properly. • When a device is selected and its keypad is displayed, keep the HOME button pressed for 3 seconds.
4.7.2.1 Deleting buttons 1 In the Setup screen, select the button you wish to delete. 2 Touch the button in the toolbar. 3 Touch the ‘Yes’ button to confirm. 4 • The Setup toolbar appears. Touch the button in the toolbar when finished. • The Setup screen appears. The button is now deleted from the remote control memory. 4.7.3 Renaming buttons 1 In the Setup screen, select the button you wish to rename. 2 Touch the button in the toolbar. • The Edit button screen appears.
English 4.7.4.2 Learning button functions When a button could not be found in the remote control database you can learn the remote control the function from the original remote control. 25 - 50 mm Extra possibilities Note Any function already stored under a button will be will be overwritten by the new function. Tips on learning button functions 2 Touch the • • 3 4 5 6 • • Some functions of some types of remote control might not be learned. Keep at least 1 metre (3.
• 4.8 The last used Setup screen appears. 3 Keep the HOME button pressed 4 5 6 Power Enables you to turn devices on and off without going back to the Home screen first. E.g. when you select an activity and one or more devices do not turn on automatically, you can turn on the device(s) by pressing the corresponding ‘On’ button(s) in the Power screen.
4.9 Adjusting system settings In the System settings menu you can adjust a number of default remote control settings to suit your own personal preferences. 1 In the Home screen, touch the ‘Devices’ tab. • The available devices are shown on the display. Hom e Devic es Activ ities Wat ch TV Listen 2 Keep the HOME button pressed for 3 seconds. • The Setup screen appears. to m usic W x • DVD Recei 3 Touch ‘My Prestigo’.
2 Click the ‘Next’ button and follow the on-screen instructions for installing the PrestigoSync software. 4.10.1 Synchronizing data between the remote control and your PC 1 Make sure both PC and remote control are turned on. 2 Connect the USB cable supplied 3 • between the USB port of the remote control and a USB port of the PC. • The PrestigoSync application will now be launched automatically. You can now modify the icon library and synchronize back to the remote control by pressing the ‘Sync’ button.
Operation The remote control does not wake up anymore. Battery level too low. • Recharge the battery. For this refer to chapter 2.1 ‘Charging the battery’. Battery lifetime came to an end (battery cannot be recharged anymore). • Replace the battery. For this refer to chapter 7.2.2 ‘Replacing the battery’. The device I want to operate does not respond at all / does not respond to all of the button commands. • Check if the buttons you press are available on the original remote control of the device.
6 7 Service and support Maybe the ‘Select Input’ signal was interrupted when the macro command was sent. • Press the A/V button and select the device. Or: • Touch the appropriate AV button in the A/V screen. For this refer to chapter 4.8 ‘Reconfiguring the Power / AV buttons’. 7.1 Need help? If the problem occurs frequently, try adding delays to the Start Activity macro. For this, refer to chapter 4.3 ‘Setting up activities’.
7.2.1 Disposal of your old product (Europe only) Your product is designed and manufactured with high quality materials and components, which can be recycled and reused. When this crossed-out wheeled bin symbol is attached to a product it means the product is covered by the European Directive 2002/96/EC. Please inform yourself about the local separate collection system for electrical and electronic products.
Notice for Canada / Remarque pour le Canada This class B digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la Classe B est conforme à la norme NMB-003 du Canada. English battery as indicated. Service and support 4 Insert and connect the new Note Your product contains a built-in rechargable battery covered by the European Directive 2006/66/EC.
TV Other equipment Brand Model number Model number of original remote control English Equipment list Equipment list Brand Model number Model number of original remote control Set-Top Box (Satellite, Antenna, or Cable Receiver / Recorder) Brand Model number Model number of original remote control Receiver / Home Theater System Brand Model number Model number of original remote control DVD Player / Blu-Ray player Brand Model number Model number of original remote control Game Console Brand Model
© 2008 Koninklijke Philips Electronics N.V. All rights reserved. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. No liability will be accepted by the publisher for any consequence of its use.
