Register your product and get support at www.philips.
1 Important Safety Notice Banned Substance Declaration Class II statement 2 Your PhotoFrame Introduction What’s in the box Overview of your PhotoFrame 3 Get started Install the stand Connect power Turn on the PhotoFrame Transfer media Know these keypad icons 4 Display photos Manage slideshow and photos Zoom and crop a photo 5 Browse Browse and manage albums and media 6 Clock Display the clock Clock menu 7 Message Create a message Edit a message View a message 8 Settings Select an on-screen language A
1 Important No components are user serviceable. Do not open or remove covers to the inside of the product. Repairs may only be done by Philips Service Centres and official repair shops. Failure to do so shall void any warranty, stated or implied. Safety Any operation expressly prohibited in this manual, any adjustments, or assembly procedures not recommended or authorised in this manual shall void the warranty.
Philips establishes technically and economically viable objectives to optimize the environmental performance of the organization’s product, service and activities. From the planning, design and production stages, Philips emphasizes the importance of making products that can easily be recycled. At Philips, end-of-life management primarily entails participation in national take-back initiatives and recycling programs whenever possible, preferably in cooperation with competitors.
Class II statement Class II equipment symbol: This symbol indicates that this product has a double insulation system.
• AC-DC power adaptor Eng lish 2 Your PhotoFrame PhotoAlbum Congratulations on your purchase, and welcome to Philips! To fully benefit from the support that Philips offers, register your product at www.philips.com/welcome. Introduction • With this Philips Digital PhotoFrame, you can use the PhotoFrame to: • Display JPEG photos • Create gift messages Register your product and get support at www.philips.
Overview of your PhotoFrame a j b c d i h e f g d MENU a • Press to turn on the PhotoFrame • Press and hold to turn off the PhotoFrame • Press to switch modes: slideshow/ clock/calendar • e DC • f b • Press to return to the previous step • Press and hold to go to the home screen c OK (Joystick) 6 • Press to confirm a selection • Press to pause or resume play • Move up/down/left/right to select the upper/lower/right/left option EN Press to enter/exit the menu Socket for the AC-DC po
Eng lish 3 Get started Caution • Use the controls only as stated in this user manual. Always follow the instructions in this chapter in sequence. If you contact Philips, you will be asked for the model and serial number of this apparatus. The model number and serial number are on the back of the apparatus. Write the numbers here: Connect power Note • When you position the PhotoFrame, ensure that the power plug and outlet are easily accessible. Model No. __________________________ Serial No.
Turn on the PhotoFrame • The screen prompts you to set time and date. • Move the joystick to set time and date, and then press OK. Note • When you connect the PhotoFrame to a power supply, the PhotoFrame turns on automatically. 1 When the PhotoFrame is turned off and connected to the power supply, hold to turn on the PhotoFrame. For the first time you turn on the PhotoFrame: • • The screen prompts you to select a language. Select a language, and then press OK.
1 Select [Yes], and then press OK. • To remove a storage device, pull it out of the PhotoFrame. Eng lish Transfer media To copy photos to the PhotoFrame: Transfer photos with a storage device Caution • Do not disconnect the storage device from the PhotoFrame during media transfer.
Know these keypad icons Input in English Input in supported European languages Input in Russian / ABC aA Switch to select symbols, punctuations, alphabet or numbers Switch between upper and lower case Enter a blank space Enter a line break 10 EN
Note • You can display JPEG photos in slideshow mode on the PhotoFrame. 1 Manage slideshow and photos You can take the following steps to manage the photo in slideshow mode or the slideshow settings: 1 Press MENU. » An option menu is displayed. 2 Select an option, and then press OK. • [View Mode]: Select the view mode • [Add to Favorites]: Add the photo to the [Favorites] album on the PhotoFrame • [Slideshow Settings] In the home screen, select [Play], and then press OK.
Zoom and crop a photo With the PhotoFrame, you can zoom in a photo, crop it, and save it as a new photo. 1 In slideshow mode, press MENU. » An option menu is displayed. 2 Select [Zoom]. 7 Select [Yes], and then press OK. • 8 To cancel the operation, select [No] and then press OK. Select a location to save the new photo, and then press OK. » After the photo is saved, the PhotoFrame goes back to the slideshow mode. 3 Press OK repeatedly to zoom in the photo (or exit the zoom mode).
Eng lish 5 Browse Browse and manage albums and media You can browse and manage albums and media in wave mode or album mode. • Wave mode: » Albums are displayed in wave mode. • To access album mode, press . • • To return to wave mode, press . In wave/album mode, • Press OK once: A photo is displayed in pause mode. • Press OK twice: Slideshow is started. Manage albums and media: • Album mode: 1 Select an album/device, press MENU. » An option menu is displayed.
Thumbnail photo menu: • [Add to Favorites]: Add media in the album to the [Favorites] album • [Copy]: Copy media in the album to another album • [Move]: Move media in the album to another album • [Delete]: Delete media in the album • [Rotate]: Rotate the photo in the album • [Color Tone]: Select a color for the photo Copy media 1 2 Select [Copy], and then press OK. Select a destination album, and then press OK to start copy. Move media 1 2 Select [Move], and then press OK.
Display the clock 1 In the home screen, select [Clock] and then press OK. • [Time and Date]: Move the joystick up/ down/left/right to set time/date or to select a time/date format. For details, see Section “Settings - Set time and date”. Select a clock/calendar style 1 In the clock menu, select [Select Clock] and then press OK. 2 Move the joystick left/right to select a clock or calendar template, and then press OK. » A clock/calendar is displayed.
7 Message Create a message 1 In the home screen, select [Message] and then press OK. 2 • Edit the text of the message or change image of the message. • Set the real time and date if applicable. Select [Add a message to your photo], and then press OK. 3 Move the joystick right or left to select a message template, and then press OK. 16 EN 4 Select [Done]. » The screen prompts you to schedule the message. 5 Schedule the message.
Eng lish 6 • [Message Name]: Enter the name. For details, see “Enter the name of a message”. • [Repeat]: Select a repeat frequency • [Set Date]: Set the date or day • [Set Time]: Set the time After you complete the message, select [Done] and press OK. • To go back to the home screen, hold . Enter the name of a message 1 Select [Message Name], and then press OK. 2 Move the joystick downward twice to enter the keypad.
4 Move the joystick to select one of the following options to edit a message. • [Change Image]: Change the photo of the message • [Edit Text]: Edit the message text To change the photo of a message: 2 1 Select [Change Image], and then press OK. 2 Select a photo available on the PhotoFrame, and then press OK. Select [Add a message to your photo], and then press OK. To edit the text of a message: 3 18 1 Select [Edit Text], and then press OK. 2 Select a preset template, and then press OK.
then press OK. 3 Move the joystick downwards twice to enter the keypad. 4 To enter the text, select an alphabet/ number and then press OK. • Select an input method, see “Know these keypad icons”. • To switch between uppercase and lowercase, select aA on the displayed keypad and then press OK. 5 After you enter the text, select then press OK. 6 Move the joystick up/down/right/left to position the text, and then press OK.
8 Settings Select an on-screen language 1 In the home screen, select [Settings] and then press OK. 2 3 2 Select [Brightness], and then press OK. 3 Move the joystick up/down to adjust brightness, and then press OK. Select [Language], and then press OK. Select a language, and then press OK. Set time/date 1 In the home screen, select [Settings] and then press OK. Adjust brightness You can adjust the brightness of the PhotoFrame to achieve the best view.
2 1 In the home screen, select [Settings] and then press OK. 2 Select [Time and Date], and then press OK. 3 Select[Select Time Format] / [Select Date Format], and then press OK. 4 Select a format, and then press OK. Select [Time and Date], and then press OK. 3 Select [Set Time] / [Set Date], and then press OK. 4 Move the joystick up/down/right/left to adjust minute/hour/day/month/year, and then press OK.
Note • Ensure that the current time of the PhotoFrame is set correctly. 1 In the home screen, select [Settings] and then press OK. Tip • When the PhotoFrame is in standby (sleep) mode, you can press PhotoFrame. 2 3 Select [SmartPower], and then press OK. Select [Set On-Time] / [Set Off-Time], and then press OK. • to wake up the Hibernate the PhotoFrame 1 In the home screen, select [Settings] and then press OK. To switch off the SmartPower function, select [Off] and then press OK.
Eng lish • » After the selected period, the PhotoFrame hibernates. 2 Select [Auto-orientate], and then press OK. • 3 Select [On], and then press OK. To disable the hibernation function, select [Never] and then press OK. To get the PhotoFrame out of hibernation, press . Set auto orientation With the auto orientation function, you can play photos in the correct orientation depending on the horizontal/vertical orientation of the PhotoFrame.
2 3 Select [Set Beep], and then press OK. To turn on the button sound, select [On] and then press OK. • To turn off the button sound, select [Off] and then press OK. 2 3 Select [Slideshow], and then press OK. 4 Select a slideshow interval, and then press OK. Select [Interval], and then press OK. Select slideshow sequence Slideshow setting Select slideshow interval 1 In the home screen, select [Settings] and then press OK. 24 EN 1 In the home screen, select [Settings] and then press OK.
You can select a background border color for photos that are smaller than the PhotoFrame display. 2 3 4 In the home screen, select [Settings] and then press OK. 2 3 Select [Slideshow], and then press OK. 4 Select [RadiantColor] / a background color/ [Auto-fit], and then press OK. Select [Slideshow], and then press OK. Select [Shuffle], and then press OK. To display slideshow randomly, select [On] and then press OK. • To display slideshow in sequence, select [Off] and then press OK.
View information of the PhotoFrame You can find the model name, the firmware version of the PhotoFrame, and the memory status of the PhotoFrame and other storage device available on the PhotoFrame. 1 In the home screen, select [Settings] and then press OK. 2 Select [Info]. » The information of the PhotoFrame is displayed on the screen. » If you select a background color, the PhotoFrame displays a photo with a background color.
Select [Default Settings], and then press OK. » A confirmation message is displayed. 3 Select [Yes], and then press OK. » All settings on the PhotoFrame are set to factory default. • To cancel the operation, select [No] in the prompt message and then press OK.
9 Upgrade the PhotoFrame Caution • Do not power off the PhotoFrame during software upgrade. If there is a software update, you can download the latest software from www.philips.com/ support to upgrade your PhotoFrame. The earlier software is unavailable on line. 1 2 Visit www.philips.com/support. 3 Download the latest software onto the root directory of an SD card. 4 5 Insert the SD card into the PhotoFrame. 6 Select [Yes], and then press OK to confirm.
Temperature range • Operation: 0 °C - 40 °C/32 °F - 104 °F • Storage: -10 °C - 60 °C/14 °F - 140 °F Eng lish 10 Product information Power Note • Product information is subject to change without prior notice. • Power mode supported: AC powered • Efficiency level: V • Average consumption (system on): 4 W • Power adaptor: Picture/Display • Manufacturer: Philips Consumer Lifestyle International B.V.
• Buttons and controls: Joystick, home/ back button, menu button, power/mode button • Playback mode: Slideshow, thumbnail view, wave view, album view • Album management: Create, copy, move, delete, add to the favorites album • Photo management: Copy, move, delete, rotate, add to the favorites album, color tone • Clock: Clock, calendar, set time and date • Message: Create message, view message • Slideshow setting: Transition effect, background color, view mode, interval, shuffle, color tone • C
Eng lish 11 Frequently asked questions Is the LCD screen touch-enabled? The LCD screen is not touch-enabled. Use the buttons on the back to control the PhotoFrame. Can I use the PhotoFrame to delete photos on a memory card? Yes, it supports operations to delete photos on an external device, such as a memory card. Ensure that you enable the deletion function on a memory card available on the PhotoFrame.
12 Glossary M A Memory Stick Memory Stick. A flash memory card for digital storage on cameras, camcorders and other handheld devices. Aspect ratio Aspect ratio refers to the length to height ratio of TV screens. The ratio of a standard TV is 4:3, while the ratio of a high-definition or wide TV is 16:9. The letter box allows you to enjoy a picture with a wider perspective on a standard 4:3 screen. J JPEG A very common digital still picture format.
© 2011 Koninklijke Philips Electronics N.V. All rights reserved. UM_V3.
