Register your product and get support at PhotoFrame SPF4008 SPF4208 EN User manual
1 Important 2 Safety 2 Safety precautions and maintenance 2 Notice 2 Declaration of Conformity 2 Recycling 2 End of life disposal 3 Recycling Information for Customers 3 Compliance with Electro-Magnetic Field (EMF)3 North Europe Information (Nordic Countries) 4 Banned Substance Declaration 4 2 Your PhotoFrame Introduction What’s in the box Overview of your PhotoFrame 3 Get started Install the stand Connect power Turn on the PhotoFrame Connect a storage device Connect PC 4 Play Display photos Play video
1 Important Safety Any operation expressly prohibited in this manual, any adjustments, or assembly procedures not recommended or authorised in this manual shall void the warranty. Safety precautions and maintenance • • • • • • • • • • Never touch, push, rub or strike the screen with hard objects as this may damage the screen permanently. When the product is not used for long periods, unplug it. Before you clean the screen, turn off and unplug the power cord.
Never dispose of your product with other household waste. Please inform yourself about the local rules on the separate collection of electrical and electronic products. The correct disposal of your old product helps prevent potentially negative consequences on the environment and human health. End of life disposal • Your new product contains materials that can be recycled and reused.
North Europe Information (Nordic Countries) VARNING: FÖRSÄKRA DIG OM ATT HUVUDBRYTARE OCH UTTAG ÄR LÄTÅTKOMLIGA, NÄR DU STÄLLER DIN UTRUSTNING PÅPLATS. Placering/Ventilation ADVARSEL: SØRG VED PLACERINGEN FOR, AT NETLEDNINGENS STIK OG STIKKONTAKT ER NEMT TILGÆNGELIGE. Paikka/Ilmankierto VAROITUS: SIJOITA LAITE SITEN, ETTÄ VERKKOJOHTO VOIDAAN TARVITTAESSA HELPOSTI IRROTTAA PISTORASIASTA.
E n g lish 2 Your PhotoFrame Congratulations on your purchase, and welcome to Philips! To fully benefit from the support that Philips offers, register your product at www.philips.com/welcome. Introduction With your PhotoFrame, you can enjoy: • Digital photo • Home video • MP3 music as background You can place it on a flat surface or hang it on the wall for a continuous play.
PhotoFrame Quick start guide 1 2 3 Get started Play Setup Eng • Quick Start Guide Overview of your PhotoFrame a m b l c d k e f g h i • a • Turn on/off the PhotoFrame • • Play slideshow/music/video Toggle between slideshow mode, browse mode, and calendar mode b c • (For music/video) Pause or resume play Confirm a selection • Enter the main menu • Slot for a USB flash drive e / / / • Select the previous/next/right/left option d OK 6 j EN f g DC • Socket for the AC-DC power ada
j SD/MMC/xD/MS/MS Pro • Slot for an SD/MMC/xD/MS/MS Pro card E n g lish i Kensington lock k Stand hole l Wall mounting hole m Speaker EN 7
3 Get started 3 Turn the stand anti-clockwise 45 degrees to the position and lock it to the PhotoFrame firmly. Caution • Use the controls only as stated in this user manual. Always follow the instructions in this chapter in sequence. If you contact Philips, you will be asked for the model and serial number of this apparatus. The model number and serial number are on the back of the apparatus. Write the numbers here: Model No. __________________________ Serial No.
E n g lish Connect a storage device Caution • Do not remove a storage device from the PhotoFrame when files are transferring from or to the storage device. 2 Select a language, and press OK to confirm. » Help message for control keys is displayed.
Connect PC Caution • Do not disconnect the PhotoFrame from the PC when files are transferring between the PhotoFrame and the PC. 1 Connect a suitable USB cable to the PhotoFrame and to the PC. » You can drag and drop files from the PC to the internal memory of the PhotoFrame. 2 After all copy and save actions are complete, disconnect the USB cable from the PC and the PhotoFrame.
Display photos 3 Select an album, and then press OK to confirm. » Photos in the album are displayed in thumbnail mode. 4 Press to start slideshow play. • In slideshow mode, press / to display the next/previous photo. • In slideshow mode, press to toggle between slideshow, browse, and calendar mode. Note • You can play only JPEG photos on the PhotoFrame. 1 In the main menu, select [Photos] and then press OK to confirm.
Play video 4 Select a file to play. • To select all files, press and hold OK. Note 5 • • • • • • • • Press to start play. During play: To stop, press and hold . To pause, press OK. To resume, press OK again. To play in full screen, press . To stop play in full screen, press . To adjust volume, press / . To select the next/previous file, press / . To mute play, press and hold until the • icon is displayed. To change repeat mode, press • You can play only M-JPEG video files (in *.
4 Select a file to play. • To select all files, press and hold OK. Note 5 Press to start play. During play: To pause, press OK. To resume, press OK again. To stop, press . To select the next/previous file, press / . To adjust volume, press / . To mute play, press and hold until the icon is displayed. To change repeat mode, press repeatedly. • You can play only MP3 (MPEG Audio Layer III) music files on the PhotoFrame. 1 In the main menu, select [Music] and then press OK to confirm.
7 Select [Yes], and then press OK to start play.
2 Select a photo source, and then press OK to confirm. 3 Select an album, and then press OK to confirm. » Photos in the album are displayed in thumbnail mode. 4 Press / / / to select a photo, and then press OK to confirm. • To select all photos displayed on the screen, press and hold OK for more than 1 second. You can browse multiple photos in thumbnail mode. In thumbnail mode, you can access the photo menu to edit photos. 1 In the main menu, select [Photos] and then press OK to confirm.
5 Press to access [Photo Menu] and manage the photo. Select a photo frame 1 In [Photo Menu], select [Frames] and then press OK to confirm. 2 Select a frame, and then press OK to confirm. Tip • If the number of photos in the album is over 16, you can press / to move to the next/previous 16 photos. Rotate a photo Select a photo effect 1 In [Photo Menu], select [Rotate] and then press OK to confirm. 1 In [Photo Menu], select [Photo Effects] and then press OK to confirm.
Press to zoom in a photo. • Press to zoom out a photo. 3 Press / / / to crop the photo, and then press OK to confirm. 4 Select [Yes], and then press OK to confirm. E n g lish 2 Tip • Zoom and crop function is only applied to photos over 800 x 600 pixel. Copy/Delete photos or files 2 You can copy or delete a photo or a music/ video file on the PhotoFrame. Select a target folder, and then press OK to start copy.
6 Manage an album 4 To enter the new name (up to 24 characters), select an alphabet/number and then press OK to confirm. • To switch between uppercase and lowercase, select [abc] on the displayed keypad and then press OK to confirm. 5 When the name is complete, select [Enter] and then press OK to confirm. Create an album You can create an album on the PhotoFrame and on a storage device connected to the PhotoFrame. 1 In the main menu, select [Photos] and then press OK to confirm.
1 2 3 E n g lish Rename an album Select an album. Press to access the album menu. Select [Rename Album], and then press OK to confirm. » A keypad is displayed. 4 To enter the new name (up to 24 characters), select an alphabet/number and then press OK to confirm. • To switch between uppercase and lowercase, select [abc] on the displayed keypad and then press OK to confirm. 5 When the name is complete, select [Enter] and then press OK to confirm.
7 Slideshow Select a transition effect 1 In the main menu, select [Slideshow] and then press OK to confirm. 2 Select [Transition Effect], and then press OK to confirm. 3 Select a transition effect, and then press OK to confirm. Select slideshow sequence You can display the slideshow in sequence or randomly. 1 2 In the main menu, select [Slideshow] and then press OK to confirm. Select [Slideshow sequence], and then press OK to confirm.
Display collage photos 1 In the main menu, select [Slideshow] and then press OK to confirm. 1 In the main menu, select [Slideshow] and then press OK to confirm. 2 Select [Frequency], and then press OK to confirm. 2 Select [Collage], and then press OK to confirm. 3 Select a transition time, and then press OK to confirm. 3 Select [Multi], and then press OK to confirm. 4 5 6 Select a layout. 7 Press (Right) to select [Photo 1]. Press (Right) again to access the photo source options.
8 Repeat steps 5 to 7 until all photos are selected for the format. 9 Press to start collage display. • To stop collage display, select [Slideshow] > [Collage] > [Single] and then press OK to confirm. Tip • • If you select a collage layout, the PhotoFrame displays a static collage and the slideshow mode is deactivated. If you select [Random] format, the PhotoFrame automatically does the random collage base on the optimal layout of photos and displays the collages in slideshow mode.
E n g lish » If you select [RadiantColor], the PhotoFrame extends the color on the edges of a photo that is smaller than the full screen to fill the screen without black bars or aspect ratio distortion.
8 Setup Select on-screen language 1 2 In the main menu, select [Setup] and then press OK to confirm. 4 Select a language, and then press OK to confirm. Adjust display brightness You can set the brightness of the PhotoFrame to achieve the best view. 1 In the main menu, select [Setup] and then press OK to confirm. 2 Select [Brightness], and then press OK to confirm. 3 Press / to adjust brightness, and then press OK to confirm. Select [Language], and then press OK to confirm.
2 Select [Time and Date], and then press OK to confirm. 3 Select [Set time] / [Set date], and then press OK to confirm. 4 Press / / / and OK to enter the current time/date, and then press OK to confirm. E n g lish Protect/Unprotect content of memory card You can enable the delete function on a storage device available on the PhotoFrame. To avoid deleting photos on a storage device, you can also disable the delete function on a storage device.
Set time and date format 3 Select [Set time format] / [Set date format], and then press OK to confirm. 4 Select the time/date format, and then press OK to confirm. You can set the format of the time and date displayed on the PhotoFrame. 1 2 In the main menu, select [Setup] and then press OK to confirm. Select [Time and Date], and then press OK to confirm. Show clock You can show clock or calendar in slideshow on the PhotoFrame. 1 26 EN In the main menu, select [Setup] and then press OK to confirm.
Select [Time and Date], and then press OK to confirm. Set an event reminder You can create a reminder for a special event, and you can also select a photo to be displayed at a selected time. Tip • Ensure that you set the current time and date of the PhotoFrame before you set an event reminder. Create an event reminder 3 4 1 In the main menu, select [Setup] and press OK to confirm. 2 Select [Event Reminder], and then press OK to confirm. Select [Show clock], and then press OK to confirm.
3 Select [New reminder], and then press OK to confirm. 1 In the main menu, select [Setup] and then press OK to confirm. » A keypad is displayed. 2 Select [Event Reminder], and then press OK to confirm. 3 Select a reminder, and then press OK to confirm. 4 To enter the new name (up to 24 characters), select an alphabet/number and then press OK to confirm. • To switch between uppercase and lowercase, select [abc] on the displayed keypad and then press OK to confirm.
Select [Set time] / [Set date], and then press OK to confirm. 5 Press / / / and OK to set the time/ date, and then press OK to confirm. 3 Select a reminder, and then press OK to confirm. 4 Select [Set], and then press OK to confirmn. • Select [On] to set the reminder on, and then press OK to confirm. • To set the reminder off, select [Off] and then press OK to confirm. E n g lish 4 Tip • When the reminder alerts, you can press any button once to stop the reminder.
5 Select [Yes], and then press OK to confirm. 3 Select a reminder, and then press OK to confirm. 4 Select [Photo], and then press OK to confirm. 5 Select a photo source, and then press OK to confirm. 6 Select a photo, and then press OK to confirm. Select a reminder photo You can select a photo to display for a reminder. Each event reminder activates the latest defined photo only. If there is no defined photo, the reminder takes the default Philips start up photo.
2 3 4 1 In the main menu, select [Setup] and then press OK to confirm. 2 Select [DEMO], and then press OK to confirm. 3 Select [On], and then press OK to confirm. Select [Event Reminder], and then press OK to confirm. Select [Snooze], and then press OK to confirm. Select an options, and then press OK to confirm.
Set display auto on/off by time 3 Select [Set time], and then press OK to confirm. 4 Select [Weekday] / [Weekend], and then press OK to confirm. 5 Select [Auto on] / [Auto off], and then press OK to confirm. • To cancel [Auto on] / [Auto off], select [Set On/Off] > [Off]. You can configure the time for the PhotoFrame to turn on or off the display automatically. Note • Ensure that you set the current time and date of the PhotoFrame before you set the auto on/off function.
Press / / / and OK to set the time for auto-on/auto-off function, and then press OK to confirm. 2 Select[Auto Orientation], and then press OK to confirm. 3 Select [Enable] to set on auto orientation function, and then press OK to confirm. • To set off auto orientation function, select [Disable] and then press OK to confirm.
2 3 Select [Set Beep], and then press OK to confirm. Select [On] to turn on the button sound, and then press OK to confirm. • To turn off the button sound, select [Off] and then press OK to confirm. View status of the PhotoFrame You can find the free space, connected media, and the firmware version of the PhotoFrame. 1 In the main menu, select [Setup] and then press OK to confirm. 34 EN 2 Select [Status]. » The status of the PhotoFrame is displayed on the right of the screen.
1 In the main menu, select [Setup] and then press OK to confirm. 2 Select [Settings], and then press OK to confirm. 3 Select [Default], and then press OK to confirm.
9 Product information Note • Product information is subject to change without prior notice. Picture/Display • Viewing angle: @ C/R > 10, 140° (H)/100° (V) • Lifetime, to 50% brightness: 20000 hr • Aspect ratio: 4:3 • Panel resolution: 800 x 600 • Brightness (typical): 250 cd/m² • Contrast ratio (typical): 300:1 Audio feature • Audio supported format: MP3 (MPEG Audio Layer III) • Bit rate: 16 ~ 320 Kbps • Sample rate: 8 ~ 48 KHz • Speaker output power (RMS): 0.8 W Video feature • Video supported format: *.
• • • • System status: Firmware version, Remaining memory Plug & Play Compatibility: Windows Vista, Windows 2000/XP or later Regulatory Approvals: BSMI, C-Tick, CCC, CE, GOST, PSB, Switzerland Other convenience: Kensington lock compatible On-Screen Display languages: English, Spanish, German, French, Italian, Dutch, Danish, Russian, Simplified Chinese, Traditional Chinese, Portuguese E n g lish • EN 37
10 Frequently asked questions Is the LCD screen touch-enabled? The LCD screen is not touch-enabled. Use the buttons on the back to control the PhotoFrame. Can I switch different slideshow photos by using different memory cards? Yes. When a memory card is connected to the PhotoFrame, you can play photos on the specific memory card in slideshow mode. Will the LCD be damaged, if I keep showing the same photo for a long time? No.
A Aspect ratio Aspect ratio refers to the length to height ratio of TV screens. The ratio of a standard TV is 4:3, while the ratio of a high-definition or wide TV is 16:9. The letter box allows you to enjoy a picture with a wider perspective on a standard 4:3 screen. J JPEG A very common digital still picture format. A still-picture data compression system proposed by the Joint Photographic Expert Group, which features small decrease in image quality in spite of its high compression ratio.
© 2009 Koninklijke Philips Electronics N.V. All rights reserved. UM_V1.0G_V1.
