Register your product and get support at www.philips.
E n gl i s h Contents 1 Important Safety Safety precautions and maintenance Notice Respect copyrights End of life disposal Recycling Information for Customers Environmental information North Europe Information (Nordic Countries) Banned Substance Declaration Class II statement 2 Your PhotoFrame Introduction What’s in the box Overview of your PhotoFrame 3 Get started Install the stand Connect power Turn on the PhotoFrame Turn off the PhotoFrame Transfer media Transfer photos with a storage device Transfer
1 Important Safety Safety precautions and maintenance • • • • • • • • • Never touch, push, rub or strike the screen with hard objects as this may damage the screen permanently. When the product is not used for long periods, unplug it. Before you clean the screen, turn off and unplug the power cord. Only clean the screen with a soft, water-damp cloth. Never use substances such as alcohol, chemicals or household cleaners to clean the product.
Environmental information Your product is designed and manufactured with high quality materials and components, which can be recycled and reused. When you see the crossed-out wheel bin symbol attached to a product, it means the product is covered by the European Directive 2002/96/EC: North Europe Information (Nordic Countries) VARNING: FÖRSÄKRA DIG OM ATT HUVUDBRYTARE OCH UTTAG ÄR LÄTÅTKOMLIGA, NÄR DU STÄLLER DIN UTRUSTNING PÅPLATS.
2 Your PhotoFrame • CD-ROM, with digital user manual Register your product and get support at www.philips.com/welcome PhotoFrame Quick Start Guide Congratulations on your purchase, and welcome to Philips! To fully benefit from the support that Philips offers, register your product at www.philips.com/welcome.
E n gl i s h Overview of your PhotoFrame a j b c d i h e f a g f • • Press to switch mode: slideshow/ clock/calendar Hold to turn on/off the PhotoFrame g • • Press to go back Hold to go to the home screen h • • b c OK (Joystick) • Press to confirm a selection • Press to pause or resume play • Move up/down/left/right to select the upper/lower/right/left option Slot for a USB cable to PC SD/MMC/MS/MS Pro Slot for an SD/MMC/MS/MS Pro card Kensington lock i Stand hole j Wall mounting hole d M
3 Get started Caution • Use the controls only as stated in this user manual. Always follow the instructions in this chapter in sequence. If you contact Philips, you will be asked for the model and serial number of this apparatus. The model number and serial number are on the back of the apparatus. Write the numbers here: Model No. __________________________ Serial No.
E n gl i s h Turn on the PhotoFrame Note • When you connect the PhotoFrame to a power supply, the PhotoFrame turns on automatically. 1 When the PhotoFrame is turned off and connected to the power supply, hold to turn on the PhotoFrame. For the first time you turn on the PhotoFrame: • The screen prompts you to select a language. • Select a language, and then press OK. • Move the joystick to set time and date, and then press OK.
Transfer media Transfer photos with a storage device To select all media: 1 2 Caution • Do not disconnect the storage device from the PhotoFrame during media transfer. The PhotoFrame supports most types of the following storage device: • Secure Digital (SD) • Secure Digital High Capacity (SDHC) • Multimedia Card (MMC) • Memory Stick (MS) • Memory Stick Pro (MS Pro) 1 Insert a storage device into the PhotoFrame. » An option menu is displayed. Select [Yes], and then press OK.
When the transfer is complete, disconnect the USB cable from the computer and the PhotoFrame. » The PhotoFrame reboots. E n gl i s h 2 Tip • You can transfer media from the PhotoFrame to a computer. • The transfer speed depends the operating system and the software configuration of the computer.
4 Display photos 1 Press MENU. » An option menu is displayed. 2 Select an option, and then press OK.
Select [Zoom]. 3 Press OK repeatedly to zoom in the photo (or exit the zoom mode). 4 5 6 Move the joystick to pan the photo. To create an album to save the photo: 1 Select [Create New Album], and then press OK to confirm. E n gl i s h 2 » A keypad is displayed. Press MENU. Select [Crop and Save], and then press OK. 2 Move the joystick downwards twice to enter the keypad. 3 To enter the name (about 24 characters), select an alphabet/number and then press OK.
5 Browse Browse albums: 1 In the home screen, select [Browse] and then press OK. Browse and manage albums and media You can browse and manage albums and media in wave mode or album mode. • Wave mode: » Albums are displayed in wave mode. • • • Album mode: To access album mode, press . • To return to wave mode, press . In wave/album mode, • Press OK once: A photo is displayed in pause mode. • Press OK twice: Shideshow is started. Manage albums and media: 1 Select an album/device, press MENU.
Thumbnail photo menu: • [Add to Favorites]: Add media in the album to the [Favorites] album • [Copy]: Copy media in the album to another album • [Move]: Move media in the album to another album • [Delete]: Delete media in the album • [Rotate]: Rotate the photo in the album • [Color Tone]: Select a color for the photo • [Group by]: Group media in the album by name or date • [Multiple-select]: Select multiple photos to manage When you select the [Favorites] album, a different menu is displayed.
Rename an album 1 Select [Rename], and then press OK to confirm. » A keypad is displayed. 2 Move the joystick downwards twice to enter the keypad. 3 To enter the name (about 24 characters), select an alphabet/number and then press OK. • To switch between uppercase and lowercase, select aA on the displayed keypad and then press OK. 4 When the name is complete, select and then press OK. Select multiple photos to manage 1 Select [Multiple-select], and then press OK. 2 Select media.
• [Time and Date]: Move the joystick up/ down/left/right to set time/date or to select a time/date format. For details, see Section “Settings - Set time and date”. Display the clock 1 In the home screen, select [Clock] and then press OK. Select a clock/calendar style 1 In the clock menu, select [Select Clock] and then press OK. 2 Move the joystick left/right to select a clock or calendar template, and then press OK. • To go back to the home screen, hold . » A clock/calendar is displayed.
7 Message Create a message Note • At power up, select [Personalize Frame] to add a message to your photo or to view a message. 1 2 In the home screen, select [Message] and then press OK. • Edit the text of the message or change image of the message. Select [Add a message to your photo], and then press OK. • Set the real time and date if applicable. 3 Move the joystick right or left to select a message template, and then press OK. 16 EN 4 Select [Done].
• • • 6 [Message Name]: Enter the name. For details, see “Enter the name of a message”. [Repeat]: Select a repeat frequency [Set Date]: Set the date or day [Set Time]: Set the time After you complete the message, select [Done] and press OK. 3 To enter the name (about 24 characters), select an alphabet/number and then press OK. • To switch between uppercase and lowercase, select aA on the displayed keypad and then press OK. 4 When the name is complete, select and then press OK.
To edit the text of a message: 4 Move the joystick to select one of the following options to edit a message. • [Change Photo]: Change the photo of the message • [Edit Message]: Edit the message 1 Select [Edit Message], and then press OK. 2 Select a preset template, and then press OK. » The keypad is displayed. 3 Move the joystick downwards twice to enter the keypad. 4 To enter the text, select an alphabet/ number and then press OK. • Select an input method, see “Know these keypad icons”.
Move the joystick up/down/right/left to position the text, and then press OK. 7 Move the joystick up/down/right/left to select the color or font of the text, and then press OK. 8 9 Move to , and then press OK. Select [Done], and then press OK. 4 Press MENU, and then select an option to continue. 5 Follow the on screen instruction to reschedule the message or delete the message. To go back to the message browser screen, select [Done] and then press OK.
8 Settings Select an on-screen language 1 2 3 20 Adjust brightness You can adjust the brightness of the PhotoFrame to achieve the best view. 1 In the home screen, select [Settings] and then press OK. 2 Select [Brightness], and then press OK. 3 Move the joystick up/down to adjust brightness, and then press OK. In the home screen, select [Settings] and then press OK. Select [Language], and then press OK. Select a language, and then press OK.
1 E n gl i s h Set time/date In the home screen, select [Settings] and then press OK. Set time/date format 2 1 In the home screen, select [Settings] and then press OK. 2 Select [Time and Date], and then press OK. Select [Time and Date], and then press OK. 3 Select [Set Time] / [Set Date], and then press OK. 3 4 Select[Select Time Format] / [Select Date Format], and then press OK. Move the joystick up/down/right/left to adjust minute/hour/day/month/year, and then press OK.
4 Select [Set On-Time] / [Set Off-Time], and then press OK. • To switch off the SmartPower function, select [Off] and then press OK. 5 Move the joystick up/down/right/left to set time, and then press OK. Set SmartPower timer With the SmartPower timer, you can configure the time for the display of the PhotoFrame to turn on or turn off automatically. When the display automatically turns off, the PhotoFrame goes to standby (sleep) mode. Note • Ensure that the current time of the PhotoFrame is set correctly.
E n gl i s h Tip • When the PhotoFrame is in standby (sleep) mode, you can press PhotoFrame. to wake up the Hibernate the PhotoFrame 1 In the home screen, select [Settings] and then press OK. • To get the PhotoFrame out of hibernation, press . Set auto orientation With the auto orientation function, you can play photos in the correct orientation depending on the horizontal/vertical orientation of the PhotoFrame. 2 3 1 In the home screen, select [Settings] and then press OK.
3 Select [On], and then press OK. • • To disable the auto orientation function, select [Off] and then press OK. Turn button sound on/off 1 2 3 24 In the home screen, select [Settings] and then press OK. To turn off the button sound, select [Off] and then press OK. Protect/Unprotect content on a storage device With the PhotoFrame, you can delete content on a storage device available on the PhotoFrame.
E n gl i s h 3 Select [Enable Delete] / [Disable Delete], and then press OK. 2 Select [Demo], and then press OK. 3 Select [On], and then press OK. » The demo function is activated. » When Demo mode is ON, the photo frame will play the DEMO slideshow automatically once the power cable is connected. Set demo on/off Note • • The demo function is only effective during photo slideshow. 1 In the home screen, select [Settings] and then press OK. • During demo show, press any button to exit it.
Slideshow setting Select slideshow interval 1 2 3 Select slideshow sequence 1 In the home screen, select [Settings] and then press OK. 2 3 4 Select [Slideshow], and then press OK. In the home screen, select [Settings] and then press OK. Select [Slideshow], and then press OK. Select [Interval], and then press OK. Select [Shuffle], and then press OK. To display slideshow randomly, select [On] and then press OK. • To display slideshow in sequence, select [Off] and then press OK.
1 2 3 4 In the home screen, select [Settings] and then press OK. Select [Slideshow], and then press OK. Select [Transition Effect], and then press OK. Select a transition effect, and then press OK. 3 Select [Background Color], and then press OK. 4 Select [RadiantColor] / a background color/ [Auto-fit], and then press OK.
» If you select a background color, the PhotoFrame displays a photo with a background color. » If you select [Auto-fit], the PhotoFrame extends a photo to fill the screen with picture distortion. Power meter 1 In the home screen, select [Settings] and then press OK. 2 3 Select [Power Meter], and then press OK. To show the power meter, select [On] and then press OK. • To hide the power meter, select [Off] and then press OK.
Select [Info]. E n gl i s h 2 » The information of the PhotoFrame is displayed on the screen. Reset all settings to factory default 1 In the home screen, select [Settings] and then press OK. 2 Select [Default Settings], and then press OK. » A confirmation message is displayed. 3 Select [Yes], and then press OK. » All settings on the PhotoFrame are set to factory default. • To cancel the operation, select [No] in the prompt message and then press OK.
9 Upgrade the PhotoFrame Caution • Do not power off the PhotoFrame during upgrade. If there is a software update, you can download the latest software from www.philips.com/ support to upgrade your PhotoFrame. The earlier software is unavailable on line. 1 2 Visit www.philips.com/support. Search for your PhotoFrame and go to the software section. 3 Download the latest software onto the root directory of an SD card. 4 5 Insert the SD card into the PhotoFrame.
Note • Product information is subject to change without prior notice.
• • • • • • • • • 32 Slideshow setting: Transition effect, background color, view mode, interval, shuffle, color tone Color tone: Black and white, Sepia, other colors Screen background: Black, white, grey, auto fi t, RadiantColor Settings: Language, brightness, time and date, SmartPower, hibernate, auto orientation, beep (button sound), memory card protection, demo, slideshow settings, information of the PhotoFrame, reset the PhotoFrame to the factory default System status: Friendly name, software version
E n gl i s h 11 Frequently asked questions Is the LCD screen touch-enabled? The LCD screen is not touch-enabled. Use the buttons on the back to control the PhotoFrame. Can I use the PhotoFrame to delete photos on a memory card? Yes, it supports operations to delete photos on an external device, such as a memory card. Ensure that you enable the deletion function on a memory card available on the PhotoFrame.
12 Glossary Memory Stick Memory Stick. A flash memory card for digital storage on cameras, camcorders and other handheld devices. A Aspect ratio Aspect ratio refers to the length to height ratio of TV screens. The ratio of a standard TV is 4:3, while the ratio of a high-definition or wide TV is 16:9. The letter box allows you to enjoy a picture with a wider perspective on a standard 4:3 screen. J JPEG A very common digital still picture format.
© 2010 Koninklijke Philips Electronics N.V. All rights reserved. UM_V1.
