Register your product and get support at www.philips.
8 Settings Contents 1 Important Safety Notice Banned Substance Declaration Class II statement 2 Your PhotoFrame Introduction What’s in the box Overview of your PhotoFrame 3 Get started Install the stand Connect power Turn on the PhotoFrame Transfer media Know these keypad icons 4 Display photos Manage slideshow and photos Zoom and crop a photo 5 Browse Browse and manage albums and media 6 Clock Display the clock Clock menu 7 Message Create a message Edit a message View a message 4 4 4 6 6 7 7 7 8 9
1 Important Safety Failure to do so shall void any warranty, stated or implied. Any operation expressly prohibited in this manual, any adjustments, or assembly procedures not recommended or authorised in this manual shall void the warranty. Safety precautions and maintenance • • • • • • • • • • Never touch, push, rub or strike the screen with hard objects as this may damage the screen permanently. When the product is not used for long periods, unplug it.
Recycling Information for Customers Philips establishes technically and economically viable objectives to optimize the environmental performance of the organization’s product, service and activities. From the planning, design and production stages, Philips emphasizes the importance of making products that can easily be recycled.
Banned Substance Declaration This product complies with RoHs and Philips BSD (AR17-G04-5010-010) requirements. Class II statement Class II equipment symbol: This symbol indicates that this product has a double insulation system. Norge Typeskilt finnes på apparatens underside. Observer: Nettbryteren er sekundert innkoplet. Den innebygde netdelen er derfor ikke frakoplet nettet så lenge apparatet er tilsluttet nettkontakten.
2 Your PhotoFrame Congratulations on your purchase, and welcome to Philips! To fully benefit from the support that Philips offers, register your product at www.philips.com/welcome. Register your product and get support at www.philips.
Overview of your PhotoFrame a j b c d i h e f a g f • • Press to switch mode: slideshow/ clock/calendar Hold to turn on/off the PhotoFrame g • • Press to go back Hold to go to the home screen h • b c OK (Joystick) • Press to confirm a selection • Press to pause or resume play • Move up/down/left/right to select the upper/lower/right/left option d MENU • Press to enter/exit the menu e DC • Socket for the AC-DC power adaptor 8 EN Slot for a USB cable to PC SD/MMC/MS/MS Pro • Slot for an SD/M
3 Get started Caution • Use the controls only as stated in this user manual. Always follow the instructions in this chapter in sequence. If you contact Philips, you will be asked for the model and serial number of this apparatus. The model number and serial number are on the back of the apparatus. Write the numbers here: Model No. __________________________ Serial No.
Turn on the PhotoFrame Note • When you connect the PhotoFrame to a power supply, the PhotoFrame turns on automatically. 1 When the PhotoFrame is turned off and connected to the power supply, hold to turn on the PhotoFrame. For the first time you turn on the PhotoFrame: • The screen prompts you to select a language. • • Move the joystick to set time and date, and then press OK. Tip Select a language, and then press OK.
Transfer media Transfer photos with a storage device To copy photos to the PhotoFrame: 1 Select [Yes], and then press OK. • To remove a storage device, pull it out of the PhotoFrame. Caution • Do not disconnect the storage device from the PhotoFrame during media transfer.
Know these keypad icons / ABC aA 12 EN Input in English Input in supported European languages Input in Simplified Chinese Input in Russian Switch to select symbols, punctuations, alphabet or numbers Switch between upper and lower case Enter a blank space Enter a line break
4 Display photos Note • You can display JPEG photos in slideshow Manage slideshow and photos You can take the following steps to manage the photo in slideshow mode or the slideshow settings: 1 Press MENU. » An option menu is displayed. 2 Select an option, and then press OK.
Zoom and crop a photo 8 Select a location to save the new photo, and then press OK. With the PhotoFrame, you can zoom in a photo, crop it, and save it as a new photo. 1 In slideshow mode, press MENU. » An option menu is displayed. 2 Select [Zoom]. » After the photo is saved, the PhotoFrame goes back to the slideshow mode. 3 Press OK repeatedly to zoom in the photo (or exit the zoom mode). 4 5 6 Move the joystick to pan the photo. Press MENU. Select [Crop and Save], and then press OK.
5 Browse Browse and manage albums and media You can browse and manage albums and media in wave mode or album mode. • Wave mode: » Albums are displayed in wave mode. • • To access album mode, press . • To return to wave mode, press . In wave/album mode, • Press OK once: A photo is displayed in pause mode. • Press OK twice: Slideshow is started. Manage albums and media: • 1 Select an album/device, press MENU. » An option menu is displayed. 2 Select an option, and then press OK to continue.
• • • • • [Copy]: Copy media in the album to another album [Move]: Move media in the album to another album [Delete]: Delete media in the album [Rename]: Rename the album [Multiple-select]: Select multiple photos to manage Add media to the favorite album To add media in the album to the [Favorites] album: 1 Select [Add to Favorites], and then press OK.
Rename an album 1 Select [Rename], and then press OK to confirm. » A keypad is displayed. 2 Move the joystick downwards twice to enter the keypad. 3 To enter the name (about 24 characters), select an alphabet/number and then press OK. • To switch between uppercase and lowercase, select aA on the displayed keypad and then press OK. 4 When the name is complete, select and then press OK. Select multiple photos to manage 1 Select [Multiple-select], and then press OK. 2 Select media.
6 Clock • [Time and Date]: Move the joystick up/ down/left/right to set time/date or to select a time/date format. For details, see Section “Settings - Set time and date”. Display the clock 1 In the home screen, select [Clock] and then press OK. Select a clock/calendar style 1 In the clock menu, select [Select Clock] and then press OK. 2 Move the joystick left/right to select a clock or calendar template, and then press OK. » A clock/calendar is displayed.
7 Message Create a message 1 2 3 In the home screen, select [Message] and then press OK. • Edit the text of the message or change image of the message. • Set the real time and date if applicable. Select [Add a message to your photo], and then press OK. 4 Select [Done]. » The screen prompts you to schedule the message. 5 Schedule the message. Move the joystick right or left to select a message template, and then press OK.
• • • • 6 [Message Name]: Enter the name. For details, see “Enter the name of a message”. [Repeat]: Select a repeat frequency [Set Date]: Set the date or day [Set Time]: Set the time After you complete the message, select [Done] and press OK. • To view the available messages, select [View Message]. • To go back to the home screen, hold . Enter the name of a message 1 Select [Message Name], and then press OK. 2 Move the joystick downward twice to enter the keypad.
• • [Change Image]: Change the photo of the message [Edit Text]: Edit the message text To change the photo of a message: 2 1 Select [Change Image], and then press OK. 2 Select a photo available on the PhotoFrame, and then press OK. Select [Add a message to your photo], and then press OK. To edit the text of a message: 3 4 1 Select [Edit Text], and then press OK. 2 Select a preset template, and then press OK. » The keypad is displayed.
View a message 3 Move the joystick downwards twice to enter the keypad. 4 To enter the text, select an alphabet/ number and then press OK. • Select an input method, see “Know these keypad icons”. • To switch between uppercase and lowercase, select aA on the displayed keypad and then press OK. 5 After you enter the text, select then press OK. and 6 Move the joystick up/down/right/left to position the text, and then press OK.
8 Settings Select an on-screen language 1 2 3 Adjust brightness You can adjust the brightness of the PhotoFrame to achieve the best view. 1 In the home screen, select [Settings] and then press OK. 2 Select [Brightness], and then press OK. 3 Move the joystick up/down to adjust brightness, and then press OK. In the home screen, select [Settings] and then press OK. Select [Language], and then press OK. Select a language, and then press OK.
Set time/date 1 In the home screen, select [Settings] and then press OK. 2 Select [Time and Date], and then press OK. 3 24 Select [Set Time] / [Set Date], and then press OK. EN 4 Move the joystick up/down/right/left to adjust minute/hour/day/month/year, and then press OK. Set time/date format 1 In the home screen, select [Settings] and then press OK. 2 Select [Time and Date], and then press OK. 3 Select[Select Time Format] / [Select Date Format], and then press OK.
4 Select a format, and then press OK. 3 Select [Set On-Time] / [Set Off-Time], and then press OK. • To switch off the SmartPower function, select [Off] and then press OK. 4 Move the joystick up/down/right/left to set time, and then press OK. Set SmartPower timer With the SmartPower timer, you can configure the time for the display of the PhotoFrame to turn on or turn off automatically. When the display automatically turns off, the PhotoFrame goes to standby (sleep) mode.
Hibernate the PhotoFrame » After the selected period, the PhotoFrame hibernates. 1 In the home screen, select [Settings] and then press OK. • 2 3 Select [Hibernate], and then press OK. • Select an option, and then press OK. To disable the hibernation function, select [Never] and then press OK. To get the PhotoFrame out of hibernation, press .
2 Select [Auto-orientate], and then press OK. 3 Select [On], and then press OK. 3 To turn on the button sound, select [On] and then press OK. • • To disable the auto orientation function, select [Off] and then press OK. To turn off the button sound, select [Off] and then press OK. Slideshow setting Turn button sound on/off 1 In the home screen, select [Settings] and then press OK. 2 Select [Set Beep], and then press OK.
3 4 Select [Interval], and then press OK. 1 In the home screen, select [Settings] and then press OK. 2 3 Select [Slideshow], and then press OK. Select a slideshow interval, and then press OK. Select slideshow sequence 1 Select transition effect In the home screen, select [Settings] and then press OK. 4 2 3 4 Select [Slideshow], and then press OK. 28 EN Select [Shuffle], and then press OK. To display slideshow randomly, select [On] and then press OK.
Select background color You can select a background border color for photos that are smaller than the PhotoFrame display. 1 » If you select [RadiantColor], the PhotoFrame extends the color on the edges of a photo that is smaller than the full screen to fill the screen without black bars or aspect ratio distortion. In the home screen, select [Settings] and then press OK. 2 3 Select [Slideshow], and then press OK. 4 Select [RadiantColor] / a background color/ [Auto-fit], and then press OK.
» If you select [Auto-fit], the PhotoFrame extends a photo to fill the screen with picture distortion. 2 Select [Info]. » The information of the PhotoFrame is displayed on the screen. View information of the PhotoFrame Reset all settings to factory default You can find the model name, the firmware version of the PhotoFrame, and the memory status of the PhotoFrame and other storage device available on the PhotoFrame. 1 In the home screen, select [Settings] and then press OK.
9 Upgrade the PhotoFrame Caution • Do not power off the PhotoFrame during software upgrade. If there is a software update, you can download the latest software from www.philips.com/ support to upgrade your PhotoFrame. The earlier software is unavailable on line. 1 2 Visit www.philips.com/support. 3 Download the latest software onto the root directory of an SD card. 4 5 Insert the SD card into the PhotoFrame. 6 Search for your PhotoFrame and go to the software section.
10 Product information Note • Product information is subject to change without prior notice.
• • • • • • • • • • • Clock: Clock, calendar, set time and date Message: Create message, view message Slideshow setting: Transition effect, background color, view mode, interval, shuffle, color tone Color tone: Black and white, Sepia, other colors Screen background: Black, white, gray, auto fit, RadiantColor Settings: Language, brightness, time and date, SmartPower, hibernate, auto orientation, beep (button sound), slideshow settings, information of the PhotoFrame, reset the PhotoFrame to the factory defau
11 Frequently asked questions Is the LCD screen touch-enabled? The LCD screen is not touch-enabled. Use the buttons on the back to control the PhotoFrame. Can I use the PhotoFrame to delete photos on a memory card? Yes, it supports operations to delete photos on an external device, such as a memory card. Ensure that you enable the deletion function on a memory card available on the PhotoFrame.
12 Glossary A Aspect ratio Aspect ratio refers to the length to height ratio of TV screens. The ratio of a standard TV is 4:3, while the ratio of a high-definition or wide TV is 16:9. The letter box allows you to enjoy a picture with a wider perspective on a standard 4:3 screen. J JPEG A very common digital still picture format. A still-picture data compression system proposed by the Joint Photographic Expert Group, which features small decrease in image quality in spite of its high compression ratio.
© 2011 Koninklijke Philips Electronics N.V. All rights reserved. UM_V3.
