Register your product and get support at PhotoFrame www.philips.
Contents 1 Important Safety Notice Banned Substance Declaration 2 Your PhotoFrame Introduction Playable media What's in the box Overview of your PhotoFrame 3 Get started Install the stand Connect power Turn on the PhotoFrame Transfer photos Quick menu 4 Display photos Manage slideshow and photos Manage albums and media 5 Play videos 6 Clock and calendar Clock menu 7 Setup Select an on-screen language Adjust display brightness Set time and date Set SmartPower timer Hibernate the PhotoF
1 Important Safety Safety precautions and maintenance Never touch, push, rub or strike the screen with hard objects as this may damage the screen permanently. When the product is not used for long periods, unplug it. Before you clean the screen, turn off and unplug the power cord. Only clean the screen with a soft, water-damp cloth. Never use substances such as alcohol, chemicals or household cleaners to clean the product.
In U.S.A., Philips Consumer Lifestyle North America has contributed funds for the Electronic Industries Alliance (EIA) Electronics Recycling Project and state recycling initiatives for end-of-life electronics products from household sources. In addition, the Northeast Recycling Council (NERC) - a multi-state recycling market development - plans to implement a recycling program.
2 Your PhotoFrame Congratulations on your purchase, and # % " & support that Philips offers, register your product at www.philips.com/welcome. MOV, MP4 Video codec: MPEG-4, H.264 Audio codec: PCM (128–536 kbps, 8–48 kHz), ADPCM (32–384 kbps, 8–48 kHz), AAC (8–256 kbps, 8–48 kHz) DivX, Xvid, and VC1 are not supported.
Overview of your PhotoFrame a b c j d i e 06 06 3UR h f a b BACK|POWER Hold to turn on/off the PhotoFrame. Press to go to the home screen. Press to go back. g i Stand hole j Wall mounting hole / / / Press to select the upper/lower/right/ left option. c OK Press to play/pause slideshow. = d MENU Press to enter/exit a menu. e USB socket f DC Socket for the AC-DC power adaptor.
3 Get started Caution Use the controls only as stated in this user manual. Always follow the instructions in this chapter in sequence. If you contact Philips, you will be asked for the model and serial number of this apparatus. The model number and serial number are on the back of the apparatus. Write the numbers here: Model No. __________________________ Serial No.
When the PhotoFrame is turned off and connected to the power supply, you can press BACK|POWER to turn on the PhotoFrame. » A few seconds later, the home screen is displayed. Transfer photos Caution Do not remove a storage device from the PhotoFrame PhotoFrame: The screen prompts you to select a language. when you are transferring photos from the storage device. Philips does not guarantee the compatibility with all types of storage device media.
Quick menu 1 In the home screen, press MENU. » The quick menu is displayed. 2 3 Select an option, and then press OK. [Play Photos]: Select it to play media on the storage device. [Browse]: Select it to browse media on the storage device. [Copy to PhotoFrame]: Select it to start transfer operation. 2 Select [Copy to PhotoFrame], and then press OK.
4 Display photos Manage slideshow and photos You can take the following steps to manage the photo in slideshow mode or change the slideshow settings: 1 1 Press MENU. » An option menu is displayed. 2 Select an option, and then press OK. [Slideshow Settings] [Interval]: Set the interval in slideshow. : Play media randomly or not. [Color Tone]: Select the color for the photo. [Transition Effect]: Select the transition effect. [Background Color]: Select the background color.
Manage albums and media 3 Storage device 1 Select a storage device: [PhotoAlbum], [SD/MMC Card], or [USB Drive]. 2 Press MENU. » An option menu is displayed. Select an option, and then press OK to continue. [Copy]: Copy this photo to another storage device [Delete]: Delete this photo [Color Tone]: Select a color for this photo Copy media 1 2 Select [Copy], and then press OK. Select a destination storage device, and then press OK to start copy.
5 Play videos Note See "Your PhotoFrame" > "Playable media" for supported video formats. + & compatibility. 1 In the home menu, press / to select [Video], and then press OK. » The following interface is displayed. 2 + OK. » The video starts play. 1 2 + MENU. Select an option, and then press OK.
6 Clock and calendar Clock menu 1 With the clock displayed, press MENU. » An option menu is displayed. 2 Select an option and then press OK. [Select Clock]: Press / to preview clock/calendar styles, and then press OK to select the highlighted one. [Time and Date]: Set the time and date. You can display clock and calendar in slideshow or display the clock separately. 1 Make sure that you have set the time and date correctly. 2 In the home menu, press / [Clock], and then press OK.
7 Setup In the home menu, press / to select [Settings], and then press OK. Select an on-screen language 1 Select [Language], and then press OK. 2 Select a language, and then press OK. Adjust display brightness 1 Select [Brightness], and then press OK. 2 Press / to select a brightness level, and then press OK. Set time and date 1 Select [Time and Date], and then press OK. 2 Select [Set Time], [Set Date], [Select Time Format], or [Select Date Format], and then press OK.
Note Hibernate the PhotoFrame If the PhotoFrame is disconnected from the power supply for a long time, you need set time and date again after you turn on the PhotoFrame. 1 Select [Hibernate], and then press OK. 2 Select an option, and then press OK. » After the selected period, the PhotoFrame hibernates. Set SmartPower timer ] + # & the time for the display of the PhotoFrame to turn on or turn off automatically.
[Transition Effect]: Select a transition effect [Background Color]: Select a background type for slideshow 3 Select an option, and then press OK. View the status of the PhotoFrame Select [Info]. » The information of the PhotoFrame is displayed on the right of the screen. 2 Select [Yes], and then press OK. Restore factory defaults 1 Select [Default Settings], and then press OK.
8 Upgrade the PhotoFrame Caution Do not power off the PhotoFrame during upgrade. If there is a software update, you can download the latest software from www.philips.com/ support to upgrade your PhotoFrame. The earlier software is unavailable on line. 1 2 Visit www.philips.com/support. 3 Download the latest software onto the root directory of an SD card. 4 5 Insert the SD card into the PhotoFrame. 6 Select [Yes], and then press OK to = » When the upgrade is complete, the PhotoFrame reboots.
9 Product information Dimensions & Weight Set dimensions without stand (W x H x D): 205.5 x 138 x 25 mm Set dimensions with stand (W x H x D): 205.5 x 138 x 102.5 mm Weight without stand: 0.31 kg Note Product information is subject to change without prior notice.
10 Frequently asked questions Is the LCD screen touch-enabled? The LCD screen is not touch-enabled. Use the buttons on the back to control the PhotoFrame. Can I switch different slideshow photos by using different memory cards? Yes. When a memory card is connected to the PhotoFrame, you can play photos on the & # = Will the LCD be damaged, if I keep showing the same photo for a long time? No.
Why does the PhotoFrame automatically turn off? If you enable the SmartPower function, the PhotoFrame automatically turns off at the preset time. For details, see section "Set display auto on/off".
11 Glossary M A Memory Stick & + $= ! & storage on cameras, camcorders and other handheld devices. Aspect ratio Aspect ratio refers to the length to height ratio of TV screens. The ratio of a standard TV is 4:3, # # " is 16:9. The letter box allows you to enjoy a picture with a wider perspective on a standard 4:3 screen. J JPEG A very common digital still picture format.
EN 21
© 2011 Koninklijke Philips Electronics N.V. All rights reserved. UM_V1.
