Register your product and get support at PhotoFrame SPF1127 SPF1137 EN User manual
1 Important Safety Safety precautions and maintenance Notice End of life disposal Recycling Information for Customers Recycling North Europe Information (Nordic Countries) Banned Substance Declaration 2 Your PhotoFrame Introduction What’s in the box Overview of your PhotoFrame 3 Get started Install the stand Connect power Turn on the PhotoFrame Turn off the PhotoFrame Transfer photos 4 Display photos Manage slideshow and photos 2 2 2 2 2 3 3 3 3 10 Frequently asked questions 17 11 Glossary 18 Need
1 Important Notice Safety Safety precautions and maintenance • • • • • • • • • 2 Never touch, push, rub or strike the screen with hard objects as this may damage the screen permanently. When the product is not used for long periods, unplug it. Before you clean the screen, turn off and unplug the power cord. Only clean the screen with a soft, water-damp cloth. Never use substances such as alcohol, chemicals or household cleaners to clean the product.
Philips establishes technically and economically viable objectives to optimize the environmental performance of the organization’s product, service and activities. From the planning, design and production stages, Philips emphasizes the importance of making products that can easily be recycled. At Philips, end-of-life management primarily entails participation in national take-back initiatives and recycling programs whenever possible, preferably in cooperation with competitors.
2 Your PhotoFrame Congratulations on your purchase, and welcome to Philips! To fully benefit from the support that Philips offers, register your product at www.philips.com/welcome. Introduction With Philips Digital PhotoFrame, you can display JPEG photos in high quality directly from your memories cards. What’s in the box • Philips Digital PhotoFrame • Stand • AC-DC power adaptor Register your product and get support at www.philips.
English Overview of your PhotoFrame a b c i d h e f a BACK|POWER • Hold to turn on/off the PhotoFrame • Press to go to the home screen • Press to go back b • g h Stand hole i Wall mounting hole / / / Press to select the upper/lower/ right/left option c OK • Press to play/pause slideshow • Press to confirm a selection d MENU • Press to enter/exit a menu e Kensington lock f • SD/MMC/MS/MS Pro Slot for an SD/MMC/MS/MS Pro card g DC • Socket for the AC-DC power adaptor EN 5
3 Get started Connect power Note Caution • When you position the PhotoFrame, ensure that the power plug and outlet are easily accessible. • Use the controls only as stated in this user manual. Always follow the instructions in this chapter in sequence. If you contact Philips, you will be asked for the model and serial number of this apparatus. The model number and serial number are on the back of the apparatus. Write the numbers here: Model No. __________________________ Serial No.
Turn off the PhotoFrame Note Note • When you connect the PhotoFrame to a power supply, the PhotoFrame turns on automatically. 1 When the PhotoFrame is turned off and connected to the power supply, you can press BACK|POWER to turn on the PhotoFrame. » A few seconds later, the home screen is displayed. English Turn on the PhotoFrame • You can only turn off the PhotoFrame after all copy and save actions are complete. • To turn off the PhotoFrame, press and hold BACK|POWER for 2 seconds.
» A confirmation message is displayed. To copy photos to the PhotoFrame: 1 Select [Yes], and then press OK to confirm. To display photos directly: 1 Select [No], and then press OK to confirm. 2 Select [Play], and then press OK. • To remove a storage device, pull it out.
1 English 4 Display photos In the home menu, press / to select [Play] and then press OK. » Photos are displayed in slideshow mode. • During slideshow, press / to display the next/previous photo. Manage slideshow and photos You can take the following steps to manage a photo in slideshow. 1 During slideshow, press MENU. » A menu bar is displayed. 2 Press / to select an icon, and then press OK. • : Zoom in a photo • : Rotate a photo • : Select a display mode.
5 Browse and manage photos You can browse and manage photos. 1 In the home menu, press / to select [Browse], and then press OK. » The album thumbnails are displayed. To manage photos: 1 Select a photo, and then press MENU. » A menu bar is displayed. 2 • Press / to select an icon, and then press OK. • : Play photos in slideshow • : Rotate a photo • : Change source device • : Save a photo • : Delete a photo To exit the menu bar, press MENU again.
English 6 Clock and calendar You can display clock and calendar in slideshow or display the clock separately. 1 Ensure that you have set the time and date correctly. 2 In the home menu, press / to select [Clock], and then press OK. 3 Press / to select different clock/ calendar display mode.
7 Setup 2 1 Set time and date In the home menu, press / to select [Settings], and then press OK. Select an on-screen language 1 Select [Language], and then press OK. 2 Select a language, and then press OK. Select a brightness level, and then press OK. 1 Select [Set Time]/[Set Date], and then press OK. 2 Press / / / to set time/time format or date, and then press OK. Note • If the PhotoFrame is disconnected from the Adjust display brightness 1 Select [Brightness], and then press OK.
Select slideshow frequency With the SmartPower feature, you can configure the time for the PhotoFrame to turn on or off the display automatically. 1 Select [Slideshow Interval], and then press OK. 2 Select an interval, and then press OK to confirm. Note English Set display auto on/off • Ensure that you set the current time and date of the PhotoFrame correctly before you set the auto on/off function. 1 Select [Set Off-Time]/[Set On-Time], and then press OK.
View the status of the PhotoFrame 1 Select [Info]. » The information of the PhotoFrame is displayed on the right of the screen. Restore factory defaults 1 Select [Default Settings], and then press OK. » A confirmation message is displayed. 2 Select [Yes], and then press OK.
English 8 Upgrade the PhotoFrame Caution • Do not power off the PhotoFrame during upgrade. If there is a software update, you can download the latest software from www.philips.com/ support to upgrade your PhotoFrame. The earlier software is unavailable on line. 1 2 Visit www.philips.com/support. 3 Download the latest software onto the root directory of an SD card. 4 5 Insert the SD card into the PhotoFrame. 6 Search for your PhotoFrame and go to the software section.
9 Product information Note • Product information is subject to change without prior notice.
Is the LCD screen touch-enabled? The LCD screen is not touch-enabled. Use the buttons on the back to control the PhotoFrame. Can I switch different slideshow photos by using different memory cards? Yes. When a memory card is connected to the PhotoFrame, you can play photos on the specific memory card in slideshow mode. Will the LCD be damaged, if I keep showing the same photo for a long time? No. The PhotoFrame can display the same photo continuously for 72 hours without any damage to the LCD screen.
11 Glossary Memory Stick Memory Stick. A flash memory card for digital storage on cameras, camcorders and other handheld devices. A Aspect ratio Aspect ratio refers to the length to height ratio of TV screens. The ratio of a standard TV is 4:3, while the ratio of a high-definition or wide TV is 16:9. The letter box allows you to enjoy a picture with a wider perspective on a standard 4:3 screen. J JPEG A very common digital still picture format.
© 2010 Koninklijke Philips Electronics N.V. All rights reserved. UM_V1.
