Register your product and get support at www.philips.
Content Introduction 1. Important Information 1.1 Safety precautions and maintenance 1.2 Care of the PhotoFrame 1.3 Recycling 2 2 2 2 2. 2.1 2.2 2.3 2.4 Your PhotoFrame What’s in the Box Control Buttons and Menu Connections Product Highlights 3 3 4 4 4 3. 3.1 3.2 3.3 Getting started Placing the Product Connecting to the Mains Initial Setup 5 5 5 6 4. 4.1 4.2 4.3 Using your PhotoFrame View Photos Find a Photo Delete Photos using the PhotoFrame 7 7 7 8 5. 5.1 5.
ENGLISH Introduction Philips digital PhotoFrame can be placed either vertically or horizontally to fit the photos on display. You can place it somewhere in a room for a continuous display by connecting it to the mains power supply. 1.2 1. Important 1.1 Safety precautions and maintenance Read and follow these instructions when connecting and using your PhotoFrame: • To protect your display from possible damage, do not put excessive pressure on the LCD panel.
. Your PhotoFrame 2.1 What’s in the box PhotoFrame SPF1007 Register your product and get support at PhotoFrame www.philips.
Control Buttons and Menu 2.3 Connections 2.3.1 Memory Card ENGLISH 2.2 Photo display (underside) • Use your PhotoFrame by pressing the control buttons in the back. • The control buttons and instructions are shown at the bottom of the menu screen. Use the Up / Down keys to move between the menus. Move it left and right to cycle through the menu tree. SD/ MMC /MS / xD Card Inserting a memory card: • Insert the memory card into the slot in the frame.
. Getting started 3.1 Placing the Product 3.3 The PhotoFrame should be placed on a flat surface and close to a power socket. Keep it away from high temperatures and high levels of moisture Install the stand Place the head of the stand in the socket. Rotate counterclockwise until the stand clicks into place. Initial Setup 3.3.1 Setting the Language Press the Mode button to toggle to the Main Menu, select the Setup and Up / Down to Language.
3 Time: • Press Up and Down to select the time. • Press Left and Right to move between hours and minutes. • Press the Play/OK button to confirm. 12 / 24Hr : Press Up and Down to select 12HR or 24HR. Date: • Press Up and Down to select the date. • Press Left and Right to move between days, months and years. • Press the Play/OK button to confirm. Press the Play/OK button to toggle between Clock, Slideshow or Browse mode. Press the Mode button to leave this menu and play the slideshow. Getting Started 3.3.
. Using your PhotoFrame 4.1 View Photos View pre-stored photos 1 Press the Mode button to go to the Main Menu. 2 In the Main Menu select photos, select the source as the type of memory card installed (SD/MMC, Memory Stick, xD Cards, USB ). 3 Press Play/OK, to play the photos in Thumbnail mode. 4 Press Play/OK, once again to play the photos in Slideshow mode. 4.2 Find a Photo 4.2.
Delete Photos using the PhotoFrame . PhotoFrame If you need to free up space on a memory card you can delete photos. 1 • Press the Mode button to access the Main Menu. • Press Up to Photo and press the Play/OK button. 2 • Press Down to select the media to browse and press Play/OK. • Press the Up, Down, Left or Right keys to find the image you want to delete. 3 • Press the Menu button and press Up to Delete . • Press Play/OK • Press Up or Down to Yes or No. Press Play/OK .
5.2.1 Rotate, Zoom and Crop PhotoFrame can change the orientation of photos and change the framing of photos. 3 • Press the Menu button and press Up to Rotate. • Press Play/OK or press Right. • Press Up or Down to the rotation required. Press Play/ OK. Note: The crop function only applies to original photos stored on external memory card. Rotating 1 • Press the Mode button to access the Main Menu. • Press Up to Photo and press the Play/OK button.
3 • Press the Menu button and press Up to Zoom and Crop. • Press Play/OK or Right . • Press Up or Down to the zoom in and out as required. Press Play/OK. • Press Up, Down, Left and Right to pan around the image. Press Play/OK to apply. • Press Right to Yes to confirm the crop and return to the thumbnail images. 2 • Press Down to select the media to browse and press Play/OK. • Press the Up, Down, Left or Right keys to find the image you want to add the frame to.
. Settings Use this section to setup the PhotoFrame slideshow squences, transition effects, frequency of the change of image, collage effects, background color, brightness levels, display language, automatically turn on and off, turning on and off the key help screen when first starting the PhotoFrame 6.1 6.2 Transition Effects The photos can appear on the screen using special transitions. 1 • Press the Mode button to access the Main Menu.
Frequency Use this function to select how long each photo is displayed during the slide show. 1 • Press the Mode button to access the Main Menu. • Press Up to Setup and press the Play/OK button. 6.4 Collage To show multiple photos arranged on the screen at the same time select collage. 1 • Press the Mode button to access the Main Menu. • Press Up/Down to Setup and press the Right, Play/OK button. 2 • Press Down to access Frequency and press Right.
6.5 Background Color Use this function to select the background border color for photos that are smaller than the PhotoFrame display (these photos appear with black borders). 1 • Press the Mode button to access the Main Menu. • Press Up/Down to Setup and press the Right, Play/OK button. 6.6 Brightness Change the brightness settings of the PhotoFrame to achieve the best visibility depending on the light conditions. 1 • Press the Mode button to access the Main Menu.
Language Use this section to choose the menu language of the PhotoFrame. 1 • Press the Mode button to access the Main Menu. • Press Up/Down to Setup and press the Play/OK button. 2 3 • Press Right to enter the Language menu. • Press Up and Down to select your preferred language (select between English, French, German, Italian, Simplified Chinese, Spanish, Dutch, and Danish). • Press the Play/OK button to confirm your selection. The new setting will be effective immediately. ENGLISH 6.
Setting the Start and End times 1 • Press the Mode button to access the Main Menu. • Press Up to Setup and press the Play/OK button. Turning the Automatic start and finish On and Off 1 • Press the Mode button to access the Main Menu. • Press Up to Setup and press the Play/OK button. 2 Press Down to Auto Dim . 2 • Press Down to Auto Dim. 3 • Press Right to select AutoDim Timer. • Press Up or Down to select either Auto Dim Start or Auto Dim End. • Press Right or Press Play/OK.
Check the Status of your Photoframe 6.10 Key Help You may check the status of your PhotoFrame how many more photos can be stored, which media are currently connected, and the PhotoFrame software version. When the PhotoFrame first starts a description of the control buttons is displayed for 10 seconds or until the press of any of the buttons. If you would like to turn this function off follow the instructions below. 1 • Press the Mode button to access the Main Menu.
. Technical data Model SPF1007 Picture Display • Effective viewing area: 154 x 86.2 mm • Resolution: 480x3(RGB) x 234 pixels • Viewing angle: 120RL, 100UD (CR>/=10) • Lifetime, to 50% brightness: 20,000 hr • Brightness: 150 • Aspect ratio: 16:9 • Panel resolution: 480X234 • Pixel density: 0.107(W) x 0.37(H)mm • Playback mode: Full screen browse, Slideshow, Thumbnail browse • Photo effects: Frames, Zoom and Crop, Rotate.
Frequently asked ENGLISH . questions Is the LCD screen touch-enabled? The LCD screen is not touch-enabled. Use the buttons on the back to control Digital PhotoFrame. Can I switch between different slideshows photos by using different memory cards? Yes. When a memory card is connected to the Digital PhotoFrame, it’ll slideshow photos stored on that specific card.
. Service and Warranty Recycling Information for Customers Philips establishes technically and economically viable objectives to optimize the environmental performance of the organization’s product, service and activities. From the planning, design and production stages, Philips emphasizes the important of making products that can easily be recycled.
VARNING: FÖRSÄKRA DIG OM ATT HUVUDBRYTARE OCH UTTAG ÄR LÄTÅTKOMLIGA, NÄR DU STÄLLER DIN UTRUSTNING PÅPLATS. Placering/Ventilation Waste Electronics and Electrical Equipment (WEEE) This product is labelled with this symbol in accordance with European Directive 2002/96/ EC to indicate that it must not be disposed of with your other household waste. Please check your local city office or waste disposal service for the return and recycling of this product.
2008 © Koninklijke Philips Electronics N.V. All rights reserved.
