SPC620NC User manual
What’s in the box? EN Please check that the following items are packed in the Philips SPC620NC box.They are provided to help you set up and use your Philips SPC620NC. SPC 620 NC Installation CD v.1.
EN Legend Chapterof functions 1 7 2 6 3 4 5 1 Snapshot button Enables you to take photos without using your mouse. 2 Focus ring For manually adjusting the focus of the lens. 3 Rotating foot For manually changing the vertical angle of the WebCam. 4 Clamp with rubber rims / camera foot For attaching the WebCam to your (flat panel) PC monitor or laptop screen. The clamp can be folded when the WebCam is placed on a desk or (large) desktop monitor.
Contents Chapter 3 What’s in the box? 4 Legend of functions 5 Contents 6 Welcome 7 Things you should know 7 7 Safety precautions Copyright 8 Installation 8 10 11 11 12 15 16 19 19 19 20 21 22 24 25 26 26 26 27 27 27 27 EN Installing the WebCam software Connecting the WebCam to your PC / laptop WebCam settings General settings Video settings Audio settings Features settings Operating the WebCam VLounge Selecting your WebCam Capturing images / making video recordings Instant messaging and
EN Welcome Chapter The Philips SPC620NC WebCam you have just purchased is manufactured to the highest standards and will give you years of trouble-free use. Brilliant images and blazing colors, that's what you get with the SPC620NC WebCam. After installation, the new WebCam can be used for all sorts of applications, such as: • Video: use the Philips SPC620NC WebCam for video chatting and video calling.
Things Chapteryou should know EN Please read the following instructions carefully, and retain them for future reference. It may be helpful to have the instructions for use for the PC at hand for reference. Safety precautions Observe the following guidelines to ensure that the WebCam will operate safely and to prevent defects. • Do not use your WebCam in environments outside the following range: temperature: 0°C to 40°C, relative humidity: 45% ~ 85%.
EN Installation Chapter Installing the WebCam software The software supplied only works on PCs with the operating systems Microsoft® Windows® XP and Vista. Notes! – Unplug all your USB devices (except USB keyboard and USB mouse) before you start. – Do not plug in your WebCam yet. Run the Installation CD-ROM first. – Have your Windows® CD-ROM at hand. 1 Place the installation CD-ROM in your PC’s / laptop’s CD-ROM / DVD drive. > After a couple of seconds the ‘Language selection’ screen appears.
Installation Chapter EN Or: Select the second option if you wish to continue installation. Click ‘Next’ to continue. > The ‘Installation’ screen appears. The items that can be installed are shown on the left side of the screen. An explanation of each item is given on the right side. All required items are selected by default. 5 Click the 'Next' button if you wish to install all items. Or: If there are certain items you do not wish to install, check the boxes before these items.
Installation Chapter EN Connecting the WebCam to your PC / laptop 5 5 3 3 1 Be sure to run the installation CD first, before connecting the WebCam to the PC / laptop. 2 Turn on the PC / laptop. 3 Connect the USB connector of the USB cable to the USB port of the PC / laptop. > The WebCam will now derive its power from the PC / laptop. 4 Aim the webcam as required. 5 Use the clamp and the two rubber rims to attach the WebCam to your (flat panel) PC monitor or laptop screen.
WebCam Chapter settings EN The Philips SPC620NC video properties can be changed: - from within an application; - by clicking the VProperty icon ‘‘ ‘ in the Windows taskbar, bottom right of your screen; - by selecting ‘PC Camera Settings’ under ‘Preferences’ in the VLounge selection screen; - by clicking the ‘ ’ icon in the VLounge selection screen. General settings 1 2 1 Flickerless image The Flickerless image option should only be used under flickering light conditions (e.g.
EN WebCam Chapter settings Video settings 3 4 5 6 7 8 9 0 ! @ # $ % ^ 3 Full automatic control: on/off This full automatic control mode provides a very easy way to get the best out of your Philips SPC620NC WebCam. Or you can choose to have maximum manual control over the WebCam settings by switching the full automatic control mode off. Full automatic control 'on' is the preferred setting for normal use.
WebCam Chapter settings EN 5 Auto Exposure The exposure is the amount of light received by the sensor and is determined by how long the sensor is exposed to capture a snapshot or video frame.The result depends on the sensitivity of the sensor.The WebCam will find the optimal setting if you select the automatic exposure option. Shutter speed The shutter speed determines how long the camera shutter remains open as a picture is taken.The slower the shutter speed, the longer the exposure time.
EN WebCam Chapter settings 0 Brightness Brightness enables you to adjust the brightness of the displayed image or video to suit your own preference. Use the slider to find your preferred setting. ! Contrast Contrast enables you to control the ratio between dark and light according to your own preference. Use the slider to find your preferred setting. @ Gamma Gamma enables you to brighten dark areas within the displayed image or video and visualize more details without over-exposing already light areas.
WebCam Chapter settings EN Audio settings & & Volume slider This slider provides manual control over the microphone.
EN WebCam Chapter settings Features settings * ( ) ¡ ™ £ * Face tracking If you enable the face tracking option, the WebCam will track your face.This gives you more convenience while video chatting, because you don’t need to sit still during your video conversation. ( Digital zoom Use the digital zoom option to get an object closer. Digital zoom magnifies the pixels but not the actual image. It degrades image quality. Use the slider to set the desired zoom level.
WebCam Chapter settings EN ) Change background This option enables you to replace the actual (real-time) background image by one from the WebCam background list or by one of your own pictures. Note: When changing the background, make sure that: - the actual background is static. There should be no movement within the WebCam field of view. Not even the movement of a curtain. - there is sufficient light in the room.
EN WebCam Chapter settings ¡ Add logo If you enable this option, a logo image will be placed in one of the corners of the Video stream. By default, the last used logo will be selected when the option is enabled. When the option is enabled for the first time, the Philips logo will be selected and shown in the upper right corner of the screen. Select the desired corner for the logo to be placed in by checking the corresponding box in the ‘Add logo’ screen.
Operating Chapter the WebCam EN VLounge All applications can be accessed via the Philips V(ideo)-Lounge application.VLounge is the central application for easy access to your Philips WebCam. • Start VLounge: - through the Windows QuickLaunch menu in your taskbar; - via the program group ‘SPC620NC WebCam’; - by clicking the VLounge icon ‘ ’ on the desktop. > The VLounge application will now be initiated and the VLounge selection screen appears.
EN Operating Chapter the WebCam Capturing images / making video recordings In the ‘Capture’ menu you can capture images and make video recordings and transfer, preview, edit, e-mail, print and organise your photos and video recordings. • Click the ‘Capture’ tab to open the ‘Capture’ menu. > The camera starts operating immediately. > The total amount of captured items is shown above the content panel (top right). • Click ‘IMAGE’ to capture an image. • Click ‘VIDEO’ to start a video recording.
Operating Chapter the WebCam EN Deleting captured items 1 Select the items you wish to delete in the content panel or under ‘Images’, ‘Videos’ and ‘Folders’. 2 Click ‘ ’. > The following dialogue screen appears. 3 Click the ‘OK’ button to delete the selected items.
EN Operating Chapter the WebCam Motion detection In the ‘Monitor’ menu you can set up the WebCam for motion detection and videolog recording. • Click the ‘Monitor’ tab to open the ‘Monitor’ menu. > The Monitor menu main screen appears. > The total amount of videologs is shown above the content panel (top right). > The ‘Movement’ indicator ( ) shows the amount of movement that is detected within the Webcam field of view. • Click ‘Start monitoring’ to start monitoring.
Operating Chapter the WebCam EN Monitor settings • Click ‘ ’ to access the ‘Monitor settings’ menu. > The following dialogue screen appears. • Enter the minimum memory capacity you wish to remain on your harddisk during recording. > Recording stops automatically when harddisk space comes below the set amount of Mbs. • Check the ‘Notification’ box if you wish a notification to be send to an e-mail address when movement is detected. • Enter the e-mail address you wish the notification to be sent to.
EN Operating Chapter the WebCam Broadcasting your videos over the Internet In the ‘Broadcast’ menu you can select a website where you can broadcast your videos live. • Click the ‘Broadcast’ tab to open the ‘Broadcast’ menu. • Select the desired website by clicking the corresponding ‘Launch’ button. • Follow the on-screen instructions for live broadcasting of your videos on the selected website.
Technical Chapter specifications EN Sensor....................................................................................VGA CMOS Real video resolution (Max.) ................................................640 x 480 Real still image resolution (Max.)........................................640 x 480 Interpolated still image resolution (Max.) ...............................1.3 MP Frames per second.........................................................................30 fps F-number .................
EN Important Chapter information Disclaimer Philips makes no warranty of any kind with regard to this material, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. Philips assumes no responsibility for any error that may appear in this document. Philips makes no commitment to update nor to keep current the information contained in this document. FCC compliance This device complies with Part 15 of the FCC Rules.
Important information EN Environmental information Disposal of your old product Your product is designed and manufactured with high quality materials and components, which can be recycled and reused. When this crossed-out wheeled bin symbol is attached to a product it means the product is covered by the European Directive 2002/96/EC Please inform yourself about the local separate collection system for electrical and electronic products.
Where to go for information and support? Please visit our website: www.philips.com for the latest product information. Go to: www.philips.com/support for the latest version of drivers and for troubleshooting tips. Specifications are subject to change without notice. Trademarks are the property of Koninklijke Philips Electronics N.V. or their respective owners. 2005 © Koninklijke Philips Electronics N.V. All rights reserved. www.philips.