User manual

36
English
Problem Possible cause Solution
The shaving unit is
soiled or damaged to
such an extent that the
motor cannot run.
Clean the shaving heads
thoroughly or replace them.
Theappliance
doesnot shave as
well as it used to.
The shaving heads are
damaged or worn.
Replace the shaving heads
(see 'Replacement').
 Hairs or dirt obstruct
the shaving heads.
Clean the shaving heads in
the regular way or clean
them thoroughly.
I replaced the
shaving heads, but
the display still
shows the
replacement
reminder.
You have not reset the
appliance.
Reset the appliance by
pressing the on/off button
for approx. 7 seconds.
A shaving unit
symbol has suddenly
appeared on the
display.
This symbol reminds
you to replace the
shaving heads.
Replace the shaving heads
(see 'Replacement').
The notification
symbol flashes and
the shaver beeps
while the shaver is
charging.
The appliance is
overheated.
When this happens, the
shaver stops charging
automatically. Charging
continues once the
temperature of the shaver
has decreased to the normal
level after approx. 10
minutes.
The notification
symbol flashes and
the shaver beeps
when I try to shave.
The shaving heads are
soiled.
Clean the shaving heads (see
'Cleaning and
maintenance').
The notification
symbol flashes and
the shaver beeps
after cleaning the
shaving heads.
The shaving heads are
damaged.
Replace the shaving heads
(see 'Replacement').