Register your product and get support at www.philips.
1 a b c d g e f h
2 3 4
LASER LIGHT DO NOT STARE INTO BEAM CLASS 2 LASER PRODUCT Wavelength : 645 - 660nm Maximum Power < 1mW IEC 60825-1:1993 + A1:1997 + A2:2001 EN 60825-1:1994 + A2:2001 + A1:2002 CAUTION RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE.
EN 1 Important Your product is designed and manufactured with high quality materials and components, which can be recycled and reused. When this crossed-out wheeled bin symbol is attached to a product it means that the product is covered by the European Directive 2002/96/EC. Please inform yourself about the local separate collection system for electrical and electronic products. Please act according to your local rules and do not dispose of your old products with your normal household waste.
When battery is installed: • To switch on the Presenter, push the USB receiver into the Presenter and then remove the USB receiver from it. • To switch off the Presenter, push the USB receiver to the end. 4 Auto-connect 1 Ensure that your notebook is switched on and active. 2 Ensure that your Presenter is switched on. • If the USB receiver is inserted into your Presenter, release the USB receiver from your Presenter (Fig. 3). 3 Plug the USB receiver into a USB host on your notebook.
Light on your Presenter does not blink. Ensure that the Presenter is switched on. Replace battery on the Presenter.
© 2010 Koninklijke Philips Electronics N.V. All rights reserved. Specifications are subject to change without notice.Trademarks are the property of Koninklijke Philips Electronics N.V. or their respective owners. UM_V2.
