Software Upgrade

ManualsBrandsPhilips ManualsComputer AccessoriesSNA6640/05

How to upgrade the SNA6640 Wireless Base Station firmware

Page 1 of 7

The last SNA6640 firmware, which can be downloaded from Philips,

website is: V0.31

This How-to manual will answer the following questions:

1. Why should I upgrade my SNA6640 firmware?

2. How do I know which firmware version I have in my SNA6640?

3. How do I know what the latest firmware is?

4. How do I upgrade to the latest firmware?

5. Your SNA6640 Wireless Base Station firmware is now upgraded.

Summary of content (7 pages)

PAGE 1
How to upgrade the SNA6640 Wireless Base Station firmware The last SNA6640 firmware, which can be downloaded from Philips, website is: V0.31 This How-to manual will answer the following questions: 1. Why should I upgrade my SNA6640 firmware? 2. How do I know which firmware version I have in my SNA6640? 3. How do I know what the latest firmware is? 4. How do I upgrade to the latest firmware? 5. Your SNA6640 Wireless Base Station firmware is now upgraded.
PAGE 2
How to upgrade the SNA6640 Wireless Base Station firmware 1. Why should I upgrade my SNA6640 firmware? • In order to improve WIFI range. 2. How do I know which firmware version I have in my SNA6640? Make sure your PC is connected to your Wireless Base Station (either by Wifi or by Ethernet) 2.1 Determine the IP address of your SNA6640 Wireless Base Station. Click on your PC Start => Run Type cmd and click OK. type ipconfig followed by Enter.
PAGE 3
How to upgrade the SNA6640 Wireless Base Station firmware 2.2 Browse to your SNA6640 Wireless Base Station. Open Internet Explorer and type the Default Gateway address (192.168.1.1 in this example) in the Address bar. Click “GO”. You should now see the setup page. 2.3 On the Home network Setting page, click on Status and you can find the firmware version.
PAGE 4
How to upgrade the SNA6640 Wireless Base Station firmware 3. How do I know what the latest firmware is? Check the Philips support site for the SNA6640 Wireless Base Station regularly. To download new software version, please click on the following link: http://www.p4c.philips.com/cgibin/dcbint/get?id=SNA6640/00&doctype=fus&redirect=1 * Unzip the files and store them in your PC and compare with your firmware version.
PAGE 5
How to upgrade the SNA6640 Wireless Base Station firmware Click first on “Maintenance” then “Firmware Upgrade”.
PAGE 6
How to upgrade the SNA6640 Wireless Base Station firmware Browse to the place where you’ve saved the new SNA6640 firmware in your PC. 1. Select the new SNA6640 firmware. 2. Click “Open” Click on “BEGIN UPGADE”.
PAGE 7
Wait until the update is finished. 6. Your SNA6640 Wireless Base Station firmware is now upgraded. You can check the update by control as in chapter 2.3.