WWW.SAECO.
Boekje_2xlinks_ICOON_A5pag.
1 3 4 5 1 32 31 7 2 30 8 29 9 28 10 27 26 11 12 13 25 24 23 14 22 20 15 21 16 19 17 18 6
2 3 4 5 AQUACLEAN WATER HARDNESSS STAND-BY TIME 5 sec.
26 27 28 29 1 2 1 30 31 1 2 34 MAX MIN 32 33
English 6 Dansk 21 Deutsch 37 Español 55 Français 72 Italiano 89 Nederlands 106 Norsk 123 Português 139 Suomi 156 Svenska 172 Ελληνικα 188
6 English Contents Machine overview (Fig.
English 7 Introduction Congratulations on your purchase of a Saeco full-automatic coffee machine! To fully benefit from the support that Saeco offers, please register your product at www.saeco.com/care. Read the separate safety booklet carefully before you use the machine for the first time and save it for future reference. To help you get the best out of your coffee machine, Saeco offers full support in 3 different ways: 1 The separate quick start guide for first installation and first use.
8 English 2. Activating the AquaClean filter after replacement Replace the AquaClean filter when the screen shows the message 'Replace AquaClean filter?' or after 3 months of use. Then follow the instructions on the screen to activate the filter properly. 3. Activating the AquaClean filter at any other time You can start using the AquaClean filter at any time by following the instructions below. 1 Tap the Settings icon and use the up and down icons to select 'AquaClean' (Fig. 5). 2 Tap the OK icon.
English 9 Brewing drinks You can select a drink by tapping one of the one-touch drink icons (Fig. 6) or by tapping the '7 more drinks' icon and selecting another drink. After selecting a drink, you can personalize it by adjusting the settings. You can also select a personalized drink from a profile by first selecting the profile and then selecting the drink. - To brew two cups, first tap a one-touch drink icon and then press the start/stop button twice in quick succession.
10 English 8 After brewing milk-based drinks, the display asks you if you want to perform the quick clean procedure for the milk carafe. You have 10 seconds to activate the QUICK MILK CLEAN program (see 'Milk carafe cleaning programs'). You can perform the quick clean procedure while leaving the milk inside the milk container. It is recommended to perform the quick clean procedure at least once a day.
English 11 Creating a profile 1 Tap the Profiles icon repeatedly to select one of the profiles. All profiles have different colors. You can also use the up and down icons to select your profile. 2 Tap the OK icon to customize the profile. 3 Use the up and down arrows to select the drink you want to customize and tap the OK icon to confirm. 4 Use the up and down arrows to adjust the settings to your preference and tap the OK icon to confirm. Customized drinks are marked with an asterisk (*) (Fig. 13).
12 English - To position the hook correctly, push it upwards until it is in uppermost position (Fig. 20). 3 Place back the coffee residues drawer. 4 Slide the brew group back into the machine along the guiding rails on the sides until it locks into position with a click. Do not press the PUSH button. 5 Close the service door and then place back the drip tray with coffee grounds container.
English Part description When to clean 13 How to clean Drip tray Empty and clean the drip Remove the drip tray and rinse it under the tap tray as soon as the red 'drip with some washing-up liquid. tray full' indicator pops up through the drip tray (Fig. 21). Coffee grounds container Empty and clean the coffee grounds container when prompted by the machine. Remove the coffee grounds container while the machine is switched on and rinse it under the tap with some washing-up liquid.
14 English Cleaning the milk carafe Milk carafe cleaning programs The machine has 2 programs to clean the milk carafe: the QUICK MILK CLEAN and the DEEP MILK CLEAN program. You can select these programs by tapping the Clean icon and scrolling through the cleaning menu. Then follow the instructions on the screen. The machine also prompts you to perform the QUICK MILK CLEAN program after preparing a milk-based drink. - QUICK MILK CLEAN: the machine cleans the milk spout.
English 15 Reassembling the top of milk carafe 1 To reassemble the milk spout, follow steps 2 to 4 of 'Disassembling the top of milk carafe' in reverse order. 2 Place the milk spout back in the top of milk carafe. 3 Place the top of milk carafe back onto the milk carafe. Note: Before you place the milk spout back into the top of milk carafe, move the pin inside the top to the correct position.
16 English Error codes Below you find a list of the error codes showing problems that you can solve yourself. Video instructions are available on www.saeco.com/care. If another error code appears, please contact the Philips Consumer Care Center in your country. For contact details, see the warranty leaflet. Error code Problem Possible solution 01 The coffee funnel is clogged. Switch off the machine and unplug it. Remove the brew group.
English 17 Troubleshooting This chapter summarizes the most common problems you could encounter with the machine. Support videos and a complete list of frequently asked questions are available on www.saeco.com/care. If you are unable to solve the problem, contact the Consumer Care Center in your country. For contact details, see the warranty leaflet. Problem Cause Solution The drip tray fills up quickly. This is normal. The machine uses water to rinse the internal circuit and brew group.
18 English Problem Cause Solution I cannot remove the brew group. The brew group is not in the correct position. Reset the machine in the following way: place back the drip tray and the coffee grounds container. Then close the service door and switch the machine off and back on again. Try again to remove the brew group. You have not removed the coffee grounds container. Remove the coffee grounds container before you remove the brew group. The machine is still in the descaling procedure.
English Problem 19 Cause Solution The grinder is set to a too fine setting. Set the grinder to a coarser (higher) setting. The brew group is dirty. Clean the brew group. The coffee dispensing spout is dirty. Clean the coffee dispensing spout and its holes with a needle. The machine circuit is blocked by limescale. Descale the machine. I press the start/stop button twice, but the machine does not brew two cups of coffee.
20 English Problem Cause Solution I cannot activate the AquaClean filter and the machine asks for descaling. The filter has not been replaced Descale your machine first and then in time after the AquaClean install the AquaClean filter. filter icon flashed and the capacity dropped to 0%. You did not install the AquaClean filter during first installation, but after having brewed approx. 25 coffees (based on 100ml cups).
14042_A5.
4219.440.7804.1 (10/2017) rev.00 www.saeco.com/care 4219.440.7804.1 PICOBARISTO DELUXE_BACKCOVER_A5_FC_WEU.
