Wireless TV link SLV5400 EN Welcome Quick start guide 1 2 3 Connect transmitter Connect receiver Enjoy
What’s in the box A. Transmitter B. Receiver Wireless TV link C. Remote control (including battery) SLV5400/00 SLV5400/05 Wireless TV link Quick start guide User UserManual Manual 33 NL NL Handleiding Handleiding 1419 FR FR Mode Moded’employ d’employ 25 EN EN User Manual User Manual 36 NL NL Handleiding Handleiding Mode d’employ Mode d’employ 47 FR FR D. SCART cable E. Power adapter (2x) (2x) 1 Connect 2 Enjoy SLV5400 SLV5400/00 EN EN 58 F. Quick start G. Remote control H.
1 A Connect transmitter Connect the VCR or DVD recorder If you have no VCR or DVD recorder, proceed with the next step 1. Take the supplied transmitter (A) 2. Find the SCART cable from the VCR or DVD recorder that is connected to TV1. 3. Unplug the SCART cable from TV1. 4. Plug the SCART cable into the 4-VCR/DVD RECORDER port on the transmitter (A). B VCR DVD recorder TV1 TV 1 2 3 4 1 1 3 2 4 TV1 Connect your other video source 1.
Firmly insert the SCART cables to the ports: 1. Plug the connector straight into the port. 2.Apply some force when you insert the connector. D Connect the power adapter L 1. Take the supplied power adapter (E). 2. Plug the connector into the DC 12V power connector on the transmitter (A). 3. Plug the adapter into the power outlet. > The power light on the front comes on as red. R DC 12V 2 3 1 AC E Channel 1234 Check the operation of TV1 1. Switch on TV1. 2. Switch on the connected video source.
B Connect TV2 TV2 1. Take the supplied SCART cable (D). 2. Plug one end into the TV2 SCART port on the receiver. 3. Plug the other end into the SCART port of the TV. 2 1 TV2 C 3 Connect the power adapter 1. Take the supplied power adapter (E). 2. Plug the connector into the DC 12V power connector on the receiver (B). 3. Plug the adapter into the power outlet. > The power light on the front comes on as red. DC 12V 2 3 AC D 1 Check the operation of TV2 1. Switch on TV2. 2.
Result TV2 TV1 SAT/STB AUX 3 A DVD player VCR DVD recorder Enjoy Example:View satellite programs on TV2 Your satellite receiver needs to be connected to the transmitter (A) of the wireless TV link. 1. Switch on the transmitter (A). 2. Switch on TV2. 3. Switch on the receiver (B). 4. Select the correct SCART input on TV2. 5. Point the remote control of the satellite receiver to the receiver (B). 6. Switch on the satellite receiver. 7. Operate the satellite receiver with its remote control.
Troubleshooting Problem Tip No image or wrong image on TV1 • Make sure video sources are connected to the transmitter (A). • Make sure the transmitter (A) is connected to TV1. • Make sure SCART cables are firmly inserted. • Make sure the video source is switched on. • Make sure the correct SCART input on TV1 is selected. • Select the correct video source with TV1 source. > See the user manual (H) page 8. No image or wrong image on TV2 • Make sure SCART cables are firmly inserted.
Need help? User manual See the user manual that came with your wireless TV link. Online help: www.philips.com/support Helpline België/Belgique/Belgien Danmark Deutschland España France 070 222 303 (€ 0.17) 3525 8759 0900 1101211 (€ 0.12) 902 888 784 (€ 0.15) 08 9165 0005 (€ 0.23) 0 0800 3122 1280 Ireland 01 764 0292 Italia 899 23 45 06 (€ 0.25) Luxemburg/Luxembourg 40 6661 6544 Nederland 0900 8407 (€ 0.20) Norge 2270 8111 Österreich 0900 060 827 (€ 0.
