Wireless TV Link User Manual SLV3220
A 1 2 3 4 5 W I R E L E S S 1 2 SOURCE SLV3220 WIRELESS TVLINK TRANSMITTER W I R E L E S S SOURCE 2 SOURCE 1 IR R AUDIO L PICTURE VIDEO CHANNEL DC 9V 1234 10 B 9 8 12 13 7 6 14 W I R E L E S S SLV3220 WIRELESS TVLINK RECEIVER W I R E L E S S SOURCE PICTURE CHANNEL DC 9V 1234 17 F 19 16 20 15 20
EN Contents Page Overview 4 Control and display elements 4 Your Wireless TV Link 5 Safety 5 Installation 6 Operation 7 Enjoy your Wireless TV Link 7 Troubleshooting 9 Information Information Maintenance and service Recycling and disposal Warranty Glossary 11 11 11 11 12 12 3
EN Overview Control and display elements A Transmitter 1 Integrated remote control blaster light 2 On/off switch 3 Power light: > red: standby > green: on 4 TV2 source indicator 5 SOURCE button 6 Power input connector (DC 9V) 7 Wireless channel selection switch 8 SOURCE 2 connectors (red/white/yellow) 9 SCART cable 10 Remote control blaster cord port B Receiver 12 Integrated remote control blaster light 13 On/off switch 14 Power light: > red: standby > green: on 15 Power input connector (DC 9V) 16 Wireles
Your Wireless TV Link EN You can say good-bye to wires. With your Wireless TV Link you can now wirelessly connect a second TV and choose between two devices to watch on your second TV. Safety • • • • • • • • • Read the instructions in this manual carefully before you connect, install and use the product. Keep this manual for future reference. The product is for indoor use only. Do not use the product close to water. Do not expose the product to extreme heat.
EN Installation For basic installation, see the quick start guide that came with your Wireless TV Link. Install the remote control blaster cord 1 Switch off the transmitter (A). 2 Connect the remote control blaster cord (F) to the IR socket. 3 Position the blaster light in front of the IR sensor of the video source. See the user manual of the video source for the exact location of the IR sensor on the front panel. 6 4 5 6 7 Switch on the transmitter (A).
Installation EN Remove interference on TV2 1 Find the PICTURE CHANNEL switch on the transmitter (A). 2 Set the PICTURE CHANNEL switch to a different number. 3 Find the PICTURE CHANNEL switch on the receiver (B). 4 Set the PICTURE CHANNEL switch to the same number as on the transmitter (A). Operation Enjoy your Wireless TV Link For basic operation, see the quick start guide that came with your Wireless TV Link.
Operation EN 1 2 SOURCE 3 Press SOURCE on the transmitter to select the VCR or DVD recorder. 4 Take the remote control of the VCR or DVD recorder with you. 5 Go to TV2. 6 Switch on TV2. 7 Switch on the receiver 8 Select the channel on the VCR or DVD recorder with its remote control. Turn off the auto standby mode when you use the VCR or DVD recorder to watch a cable tv program. Refer to the user manual of the VCR or DVD recorder.
Troubleshooting Problem No image or wrong image on TV1 No image or wrong image on TV2 EN Tip • Make sure video sources are connected to the transmitter (A). • Make sure the transmitter (A) is connected to TV1. • Make sure SCART cables are firmly inserted. • Make sure the video source is switched on. • Make sure the correct SCART input on TV1 is selected. • Make sure SCART cables are firmly inserted. • Make sure the receiver (B) is connected to TV2.
EN Troubleshooting Problem Tip Interference on • Slightly change the position of the receiver or the transmitter. the image of TV2. • Change the wireless channel that is used for communication. See page 7. • The receiver (B) is out of range of the transmitter (A). The number of walls and ceilings in between the receiver (B) and transmitter (A) restrict the distance. The video sources • Point the remote control directly to the receiver.
Information EN Health and safety The product transmits and receives radio waves when it is switched on. The product complies with the standards that are defined for it. The quality of the image can be influenced by the use of microwave ovens. Other wireless systems (Bluetooth, wireless networks etc.) can also have influence on the quality of the image. The product is based on RF technology.
EN Information Warranty One year limited warranty For 12 month from the date of purchase the manufacturer repairs or replaces any faulty product free of charge, subject to proof of purchase, provided the fault has not been caused by improper handling or use, and provided the product has not been damaged, whether as a result of an accident or of repair by others than the manufacturer. Glossary CVBS Easylink RCA RF technology SCART 12 Video standard for showing colors on a TV.
Need help? Troubleshooting See page 9 Online help: www.philips.com/support Helpline België/Belgique/Belgien Danmark Deutschland España France ÅëëÜäá Ireland Italia Luxemburg/Luxembourg Nederland Norge Österreich Portugal Schweiz/Suisse/Svizzera Suomi Sverige UK (United Kingdom) 070 222 303 (€ 0.17) 3525 8759 0900 1101211 (€ 0.12) 902 888 784 (€ 0.15) 08 9165 0005 (€ 0.23) 0 0800 3122 1280 01 764 0292 899 23 45 06 (€ 0.25) 40 6661 6544 0900 8407 (€ 0.20) 2270 8111 0900 060 827 (€ 0.
