Specifications

Mechanical Instructions

EN 7SK5.0l CA 4.

4.2.2 Side I/O Panel removal

Figure 4-3 Side-I/O panel removal

1. Disconnect the side panel cable from the mono carrier and

remove the cable from it’s strain reliefs.

2. Then, remove the four fixation screws [1] and remove the

board.

4.3 Set Re-assembly

To re-assemble the whole set, do all processes in reverse

order.

Be sure that, before the rear cover is mounted:

• The mains cord is positioned correctly in its guiding

brackets (make sure that the strain reliefs are replaced in

its correct position and that it will function correctly!).

• All wires/cables are returned in their original positions.

H_17220_023.eps

210607