BDL6520EL www.philips.
BDL6520EL Safety Instructions Warnings and Precautions KNOW THESE SAFETY SYMBOLS CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. This symbol indicates high voltage is present inside. It is dangerous to make any kind of contact with any inside part of this product. This symbol alerts you that important literature concerning operation and maintenance has been included with this product.
BDL6520EL Regulatory Information CE Declaration of Conformity We declare under our responsibility that the product is in conformity with the following standards: • EN60950-1:2006+A11:2009+A1:2010+A12:2011 (Safety requirement of Information Technology Equipment). • EN55022:2010 (Radio Disturbance requirement of Information Technology Equipment). • EN55024:2010 (Immunity requirement of Information Technology Equipment). • EN61000-3-2:2006 +A1:2009+A2:2009 (Limits for Harmonic Current Emission).
BDL6520EL Polish Center for Testing and Certification Notice The equipment should draw power from a socket with an attached protection circuit (a three-prong socket). All equipment that works together (computer, display, printer, and so on) should have the same power supply source. The phasing conductor of the room’s electrical installation should have a reserve short-circuit protection device in the form of a fuse with a nominal value no larger than 16 amperes (A).
BDL6520EL Information for U.K. only WARNING – THIS APPLIANCE MUST BE EARTHED. (B) Important: (A) This apparatus is supplied with an approved moulded 13A plug. To change a fuse in this type of plug proceed as follows: 1. Remove fuse cover and fuse. 2. Fit new fuse which should be a BS 1362 5A,A.S.T.A. or BSI approved type. 3. Refit the fuse cover. If the fitted plug is not suitable for your socket outlets, it should be cut off and an appropriate 3-pin plug fitted in its place.
BDL6520EL China RoHS 中国电子信息产品污染控制标识要求 (中国RoHS法规标示要求) 产品中有毒有害物质或元素 的名称及含量 有毒有害物质或元素 部件名称 铅 (Pb) 汞 (Hg) 镉 (Cd) 六价铬 (Cr 6+) 多溴联苯 (PBB) 多溴二苯醚 (PBDE) 外壳 O O O O O O 液晶面板 X X O O O O 电路板组件 X O O O O O 附件 (遥控器，电源线，连接线) X O O O O O 遥控器电池 X O O O O O O: 表示该有毒有害物质在该部件所有均质材料中的含量均在 SJ/T11363-2006 标准规定的限量要求以下. X: 表示该有毒有害物质至少在该部件的某一均质材料中的含量超出 SJ/T11363-2006 标准规定的限量要求.
BDL6520EL North Europe (Nordic Countries) Information Placering/Ventilation VARNING: FÖRSÄKRA DIG OM ATT HUVUDBRYTARE OCH UTTAG ÄR LÄTÅTKOMLIGA, NÄR DU STÄLLER DIN UTRUSTNING PÅPLATS. Placering/Ventilation ADVARSEL: SØRG VED PLACERINGEN FOR, AT NETLEDNINGENS STIK OG STIKKONTAKT ER NEMT TILGÆNGELIGE. Paikka/Ilmankierto VAROITUS: SIJOITA LAITE SITEN, ETTÄ VERKKOJOHTO VOIDAAN TARVITTAESSA HELPOSTI IRROTTAA PISTORASIASTA.
BDL6520EL Table Of Contents 1. Unpacking and Installation...................................... 1 1.1. Unpacking......................................................................1 1.2. Package Contents......................................................1 1.3. Installation Notes.......................................................1 1.4. Mounting on a Wall..................................................2 1.5. Mounting in Portrait Position..............................3 1.5.1.
BDL6520EL 1. Unpacking and Installation 1.1. Unpacking • This product is packed in a carton, together with the standard accessories. • Any other optional accessories will be packed separately. • Due to the size and weight of this display it is recommended for two people to move it. • After opening the carton, ensure that the contents are complete and in good condition. 1.2.
BDL6520EL 1.4. Mounting on a Wall To mount this display to a wall, you will have to obtain a standard wall-mounting kit (commercially available). We recommend using a mounting interface that complies with UL1678 standard in North America. 600 Protective Sheet 400 Table 1. Lay a protective sheet on a table, which was wrapped around the display when it was packaged, beneath the screen surface so as not to scratch the screen face. 2.
BDL6520EL 1.5. Mounting in Portrait Position This display can be installed in portrait position. 1. Remove the table stand, if attached. 2. Rotate 90 degrees clockwise. The “ ” logo should be on the LEFT side when facing the display. 90 90 1.5.1. How to use the logo guider for portrait position 1. Put the guider on the lower-left corner of the front bezel of the display. Fold down both of its edges. 1 2 3 1 2 3 ” logo sticker. 2.
BDL6520EL 2. Parts and Functions 2.1. Control Panel 9 MUTE INPUT 1 1 2 3 MENU 4 5 6 7 8 [POWER] button NOTE: “Keyboard Control Lock Mode” This function completely disables the access to all Keyboard Control functions. To enable or disable the keyboard control lock, press both [ ] and [ ] buttons and hold down continuously for more than 3 (three) seconds. Press to turn the display on or put the display to standby. 2 [MUTE] button Press to switch the audio mute ON/OFF.
BDL6520EL 2.2. Input/Output Terminals VIDEO OUT AUDIO OUT AUDIO IN 1 AUDIO IN 3 S-VIDEO IN AUDIO IN 2 VIDEO IN 2 5 7 9 12 13 15 (OUT) 1 3 2 (IN) 1 1 3 4 6 8 10 11 12 AC IN MAIN POWER SWITCH • VIDEO IN (BNC): Composite video signal input. • VIDEO OUT (BNC): Composite video signal output from [VIDEO IN] jack. AC OUT AC power output. 4 12 AUDIO RS232C IN / RS232C OUT • AUDIO IN 1: 3.
BDL6520EL 2.3. Remote Control 5 Press to turn on/off the information OSD displayed on the upper right corner of the screen. 2.3.1. General functions 6 • Press to decrease the value in OSD menu. 1 10 VIDEO SOURCE • Press to move the sub-picture left in PIP mode. AUDIO SOURCE 2 7 8 NOTE: This button is functional for VGA input only. 3 INPUT CHANGE 4 9 13 CONTRAST BRIGHTNESS 5 DISPLAY 6 [AUTO ADJUST] button Press to run the Auto Adjust function.
BDL6520EL 2.3.2. [FREEZE] operation 2.3.5. Operating range of the remote control Press this button to freeze the screen image. Point the top of the remote control toward the display’s remote control sensor when pressing a button. To freeze the screen image: Use the remote control within a distance of less than 10m/33ft from the display’s sensor, and a horizontal and vertical angle of less than 30 degrees. 1. Press the [FREEZE] button on the remote control to activate the FREEZE function. 2.
BDL6520EL 3. Connecting External Equipment 3.1. Using the Switch Cover A cover for the power switch is provided to prevent the display from being turned on or off accidentally. To lock the cover into position: 1. Align and insert the cover to the indentation located beside the power switch. 2. Use the screw to lock the cover.
BDL6520EL 3.2. Connecting External Equipment (DVD/VCR/VCD) 3.2.1. Using COMPONENT video input Component Out (YPbPr) Audio Out DVD / VCR / VCD [AUDIO IN 2], [AUDIO IN 3] [COMPONENT IN] (YPbPr) [R] [L] 3.2.2.
BDL6520EL 3.3. Connecting a PC 3.3.1. Using VGA input VGA Out Audio Out PC [AUDIO IN 1] [AUDIO IN 2], [AUDIO IN 3] [VGA IN] [R] [L] 3.3.2. Using DVI input DVI Out Audio Out PC [AUDIO IN 1] [AUDIO IN 2], [AUDIO IN 3] [DVI IN] [R] [L] 3.3.3.
BDL6520EL 3.4. Connecting Audio Equipment 3.4.1. Connecting external speakers External Speakers Speaker Switch NOTE: Press the [Speaker Switch] to select either the internal or external speakers according to your connection. 3.4.2.
BDL6520EL 3.5. Connecting Multiple Displays in a Daisy-chain Configuration You can interconnect multiple displays to create a daisy-chain configuration for applications such as a video wall. NOTE: Up to maximum 25 displays (5x5) can be used in a daisy-chain configuration. 3.5.1. Control connection [RS-232C] DISPLAY 2 DISPLAY 1 PC [RS232C IN] [RS232C OUT] [RS232C IN] 3.5.2.
BDL6520EL 3.6. Fixing your external PC Thi sidsplay reserved 6 pcs of M4 screw holes with 100 mm pitch for mounting your Smart Insert Module.
BDL6520EL 4. OSD Menu 4.2. An overall view of the On-Screen Display (OSD) structure is shown below. You can use it as a reference for further adjusting your display. 4.1. OSD Menu Overview 4.2.1. Picture menu Navigating the OSD Menu Picture Contrast Screen 4.1.1.
BDL6520EL NOTE: This item is functional only when {Color temperature} is set to {User}. Clock phase Smart contrast NOTE: This item is functional for VGA input only. When turned on, this function helps enhance image contrast when displaying dark scenes. Zoom mode Adjust to improve the focus, clarity and stability of the image. The pictures you receive may be transmitted in 16:9 format (wide screen) or 4:3 format (conventional screen).
BDL6520EL Audio reset H position Reset all settings in the Audio menu to factory preset values. Moves the horizontal position of the image left or right. Card OPS audio Select the analog or digital audio mode for card OPS. V position Moves the vertical position of the image up or down. 4.2.4. PIP menu PIP Picture PIP input Screen reset Screen Reset all settings in the Screen menu to factory preset values. PIP change PIP size Audio PIP audio 4.2.3.
BDL6520EL By pressing the [PIP ON/OFF] button on the remote control, you can change the mode in the order shown below: PIP PBP aspect POP PBP full Panel saving Choose to enable the panel saving functions and thus reduce the risk of “image persistence” or “ghost-imaging”. Off • {Cooling Fan} – Select {On} to turn on the cooling fan all the time. Select {Auto} to turn on/off the cooling fan according to the display’s temperature.
BDL6520EL OSD H-position to enter the following values manually. When finished, press [SET] button to store and save the chosen values. Adjust the horizontal position of the OSD menu. • IP address OSD V-position • Subnet mask Adjust the vertical position of the OSD menu. • Default gateway Monitor information • Login user name (The default user name is {admin}) Shows information about your display, including model number, serial number, operating hours and software version.
BDL6520EL Example: 2 × 2 screen matrix (4 displays) H monitors = 2 displays V monitors = 2 displays • {Overscan} – Display about 95% of the original size of the image. The rest of the areas surrounding the image will be cut off. • {Underscan} – Display the image in its original size. NOTE: This item is functional for Video mode input only. H monitors Scan conversion 1 3 V monitors Choose to enable or disable the IP (Interlace to Progressive) conversion function.
BDL6520EL Frame comp. – {No} • Which input source the display will use for each scheduled activation period. NOTE: We recommend you to set up current date and time in the {Date and time} menu before using this function. 1. Press [SET] or [ ] button to enter the submenu. Schedule Today 1 2 3 4 5 6 7 • Enable: Choose to enable or disable the Tiling function. If enabled, the display will apply the settings in {H monitors}, {V monitors}, {Position}, and {Frame comp.}.
BDL6520EL • If there are two schedule items programmed for the same time, the highest numbered schedule takes priority. For example, if schedule items #1 and #2 both set the display to power on at 7:00 AM and off at 5:00 PM, then only schedule item # 1 will take effect. on when the display power is set to on. When set to other video source inputs, the OPS will always be set to on. • {Always off} – The OPS will always be set to off. • {Always on} – The OPS will always be set to on.
BDL6520EL 5. Input Mode PC Resolution: Standard Resolution Active Resolution H Pixels Refresh Rate Pixel Rate 480 60 Hz 25.175 MHz 480 72 Hz 31.5 MHz 480 75 Hz 31.5 MHz 400 70 Hz 33.75 MHz 600 60 Hz 40 MHz 600 75 Hz 49.5 MHz 768 60 Hz 65 MHz 768 75 Hz 78.75 MHz V Lines Aspect Ratio Stand for Mode 4:3 Video Graphic Array 16:9 Wide Video Graphic Array 4:3 Super VGA 4:3 Extended Graphic Array VGA 640 WVGA 720 SVGA 800 XGA 1024 WXGA 1280 768 60 Hz 79.
BDL6520EL 6. Pixel Defect Policy We strive to deliver the highest quality products and use some of the industry’s most advanced manufacturing processes whilst practicing stringent quality control. However, pixel or sub-pixel defects on the PDP / TFT panels used in Plasma- & LCD- displays are sometimes unavoidable.
BDL6520EL 6.4. Dark Dot Defects Black dot defects appear as pixels or sub-pixels that are always dark or “off ”. These are the examples of black dot defects: One dark dot 6.5. Two adjacent dark dots = 1 pair of dark dots Two dark dots, specifications defines the minimum distance between dark dots Proximity of Pixel Defects Because pixel and sub-pixels defects of the same type that are nearby one another may be more noticeable, Philips also specifies tolerances for the proximity of pixel defects.
BDL6520EL 7. Cleaning and Troubleshooting 7.1. Cleaning Caution When Using the Display • Do not bring your hands, face or objects close to the ventilation holes of the display. The top of the display is usually very hot due to the high temperature of exhaust air being released through the ventilation holes. Burns or personal injuries may occur if any body parts are brought too close.
BDL6520EL 7.2. Troubleshooting Symptom Possible Cause Remedy No picture is displayed 1. The power cord is disconnected. 1. Plug in the power cord. 2. The main power switch on the back of the display is not switched on. 2. Make sure the power switch is switched on. 3. The selected input has no connection. 3. Connect a signal connection to the display. 4. The display is in standby mode.
BDL6520EL 8. Technical Specifications Display: Item Specifications Screen Size (Active Area) 65” LCD (165.1 cm) Aspect Ratio 16:9 Number of Pixels 1920 (H) × 1080 (V) Pixel Pitch 0.744 (H) × 0.744 (V) [mm] Displayable Colors 1.
BDL6520EL Environmental Condition: Item Temperature Humidity Altitude Specifications Operational 0 ~ 40°C Storage -20 ~ 60°C Operational 20 ~ 80% RH (No condensation) Storage 10 ~ 90% RH (No condensation) Operational 0 ~ 5,000 m Storage 0 ~ 9,000 m Internal Speaker: Item Specifications Type 1 Way 1 Speaker Input 10 W (RMS) Impedance 8Ω Output Sound Pressure 82 dB/W/M Frequency Response 160 Hz ~ 13 KHz 28
© 2013 Koninklijke Philips Electronics N.V. All rights reserved. Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips Electronics N.V. and are used under license from Koninklijke Philips Electronics N.V. Specifications are subject to change without notice.
