Leaflet

Issue date 2013-09-19
Version: 7.0.12
12 NC: 8670 000 33058
EAN: 87 12581 35705 4
© 2013 Koninklijke Philips N.V.
All Rights reserved.
Specifications are subject to change without notice.
Trademarks are the property of Koninklijke Philips N.V.
or their respective owners.
www.philips.com
Highlights
SHE9850/00
In ear headphones
Advanced Acoustic
Specifications
High definition transducer
The motor of the receiver comprises a coil, a metal
u-shaped armature and a pair of permanent magnets,
as well as a drive rod and a diaphragm.
Electromagnetic currents alter the armature's
polarity up or down, moving the drive rod and
diaphragm to generate sound output. The receiver
components have been fine-tuned to produce
greater output at lower frequencies while boosting
the peaks at higher frequencies. The result is crisp,
detailed and transparent audio with extended
precision highs.
Precisely tuned acoustics
The perfect in-ear seal of these earphones will
surprise you with exceptional noise isolation.
Angled acoustic design
Derived from a thorough understanding of the
anatomy of a human ear canal, the Angled Acoustic
design adjusts the angle of the speaker tube and ear
bud to individual ear canal shapes. Besides delivering
sound directly to your ears, it also creates a perfect
seal from ambient noise that enables you to listen to
your music at lower volume levels.
Angled acoustic fit
Derived from a thorough understanding of the
anatomy of a human ear canal, the Angled Acoustic
design adjusts the angle of the speaker tube and ear
bud to individual ear canal shapes, fitting your ears
naturally.
3-size ultra-soft silicone caps
The 3 sizes of ultra-soft silicone caps of these Philips
earphones sit comfortably in your ears without
adding pressure to them whilst blocking out
unwanted noise.
Tight-sealing foam sleeves
Made from slow recovery foam, this pair of sleeves
is a comfortable alternative to the rubber ear caps.
A snug seal is created by these foam sleeves when
they are compressed between the fingers before
being inserted into the user's ear canal. After the
earphone is held in place for a few seconds, the slow-
recovery foam expands to create a secure and tight
fit.
Premium metal housing
Housed in superior metal, these earphones are
shielded from unnecessary vibration for accurate
sound transmission, resulting in smooth bass
response and clear mid-to-high-range tones.
Sleek metal carrying case
Made of high-quality metal with a luxurious touch,
the compact carrying case incorporates a cable bank,
which provides an easy solution for neat cable
winding and headphone storage. It even includes a
storage compartment for the foam sleeves. The hard
case exterior also provides additional protection for
the headphones when they are not in use.
Symmetrical cables
These headphones have symmetrical cables to
prevent them from tangling, and hence make for easy
listening.
Flexi-grip design
The soft flexi-grip material that the body of the
headphone is sheathed in enhances its performance
and extends its durability. It protects the cable
connection from damage that otherwise could occur
due to repeated bending of the headphone body
from frequent contact with the user's fingertips
when being put on and removed.
Sound
•Impedance: 12 ohm
• Sensitivity: 115 dB SPL/mW at 1 kHz
• Maximum power input: 3 mW
• Frequency response: 20 - 20,000 Hz
Connectivity
• Cable length: 1.2 m + 1.8 m
Inner Carton
• Gross weight: 1.163 kg
• Inner carton (L x W x H): 18.4 x 13.2 x 21.3 cm
• Net weight: 0.045 kg
• Tare weight: 1.118 kg
• EAN: 87 12581 42471 8
• Number of consumer packages: 3
Outer Carton
• Gross weight: 10.248 kg
•Outer carton (L x W x H): 38.8 x 28.6 x 45.8 cm
• Net weight: 0.36 kg
• Tare weight: 9.888 kg
• EAN: 87 12581 42470 1
• Number of consumer packages: 24
Packaging dimensions
• Packaging dimensions (W x H x D):
17.5 x 17.5 x 4.1 cm
• Gross weight: 0.33365 kg
• Net weight: 0.015 kg
• Tare weight: 0.31865 kg
• EAN: 87 12581 35705 4
• Number of products included: 1
• Packaging type: Blister
•