Register your product and get support at www.philips.
1 Important Hearing Safety Electric-, Magnetic- and Electromagnetic Fields (EMF) General information Disposal of your old product Remove the integrated battery Notice for the European Union Notice for USA (FCC) Trademarks 2 Your bluetooth stereo headset Introduction What’s in the box What else you’ll need Compatibility Overview of your Bluetooth stereo headset 3 Get started Charge the headset Pair the headset with your mobile phone 4 5 6 Use the headset 4 4 4 4 5 5 5 5 6 13 14 14 14 14 7 7 7 7 8
1 Important Hearing Safety 2. One of Philips’ leading Business Principles is to take all necessary health and safety measures for our products, to comply with all applicable legal requirements and to stay well within the EMF standards applicable at the time of producing products. 3. Philips is committed to develop, produce and market products that cause no adverse health effects. Danger •• To avoid hearing damage, limit the time you use the headphones at high volume and set the volume to a safe level.
Your product is designed and manufactured with high quality materials and components, which can be recycled and reused. Remove the integrated battery English Disposal of your old product Warning •• Make sure the headset is disconnected from the USB charging cable before removing the battery. When this crossed-out wheeled bin symbol is attached to a product it means that the product is covered by the European Directive 2002/96/ EC.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
Congratulations on your purchase, and welcome to Philips! To fully benefit from the support that Philips offers, register your product at www.philips.com/welcome.
Compatibility Your headset is compatible with Bluetooth enabled mobile phones. It features Bluetooth version 2.1+EDR. It also works with devices featuring other Bluetooth versions that support the Headset profile (HSP), Hands-Free profile (HFP), Advanced Audio Distribution profile (A2DP) and Audio/Video Remote Control profile (AVRCP).
Charge the headset 3 Press and hold until the LED starts breathing white and blue alternately. »» The headset is in pairing mode, which lasts five minutes. 4 Pair the headset with the mobile phone. For details, refer to the user manual of the mobile phone. Warning •• Before you use your headset for the first time, charge the battery for four hours for optimum battery capacity and lifetime. •• Use only the original USB charging cable to avoid any damage.
4 Use the headset Connect the headset to a mobile phone 1 2 Turn on your mobile phone. Press and hold to turn the headset on. »» The blue LED is on. »» The headset is reconnected to the last connected device automatically. If the last one is not available, the headset tries to reconnect to the penultimate connected device. Note •• If you turn the mobile phone on or its Bluetooth feature after turning the headset on, connect the headset from the Bluetooth menu on your mobile phone.
Low battery. Battery is fully charged. Blue LED flashes fast. Blue LED flashes twice per second. White LED flashes. White LED is off. Use with the audio cable With the supplied audio cable, you can use the headset with non-Bluetooth enabled devices or use the headset on airplane. No battery power is required when you use the headset with the audio cable. Caution •• Finish your call before connecting the audio cable, as this will switch off battery power and end an incoming call.
5 Technical data • • • • • • • • • • • • Up to 9 hours of play time or talk time Up to 200 hours of standby time Typical time for a full charge: 3 hours Rechargeable Lithium-Polymer battery (230 mAh) 3.5 mm audio socket for corded headset mode Bluetooth 2.
Pairings may have been reset or headset has been previously paired with other device. • Pair the headset with the mobile phone again as described in the user manual. Bluetooth headset does not switch on. Voice dialing or redialing does not work. Battery is low. • Charge the headset. Your mobile phone may not support this feature. The audio cable is connected to the headset. • Disconnect the audio cable. No connection to a mobile phone. Bluetooth disabled.
Audio quality is poor when streaming from the mobile phone is very slow, or audio streaming does not work at all. The mobile phone may only support (mono) HSP/HFP but not support A2DP. • Refer to the user manual of the mobile phone for detailed information on compatibility. I hear but cannot control music on my device (e.g. skip forward/backward). The Bluetooth audio source does not support AVRCP. • Refer to the user manual of the audio source for detailed information on compatibility.
Philips Consumer Lifestyle AQ95-56F-1300KR 2011 ........................................................ (Report No. / Numéro du Rapport) ........................................................................... (Year in which the CE mark is affixed / Année au cours de laquelle le marquage CE a été apposé) EC DECLARATION OF CONFORMITY (DECLARATION DE CONFORMITE CE) We / Nous, PHILIPS CONSUMER LIFESTYLE B.V.
© 2011 Koninklijke Philips Electronics N.V. All rights reserved. SHB9100_UM_00_V1.
