Technical data

8
6 Get started
6.1  Chargeyourheadset
Before you use your headset for the first time,
charge the battery for 6 hours for optimum
battery capacity and lifetime.
Warning
Use only the original USB charging cable. Using
another charger may damage or destroy your
headset.
Plug the USB charging cable into your
computers USB socket and connect the charger
cable to the headsets charging socket.
Caution
Finish your call before charging the headset, as
connecting the headset for charging will cut an
ongoing call.
During recharging the LED indicator will show
a red light. The LED will turn off once charging
is complete. Typically a full charge will take
fourhours.Youcanoperatetheheadsetduring
charging.
6.2  Pairyourheadsetwithyourmobile
phone
YourBluetoothstereoheadsetmustbepaired
to your mobile phone before connecting and
using it for the first time with your phone.
“Pairing” will establish a unique encrypted link
between your mobile phone and your headset.
Pairinghastobedone
• beforeusingyourheadsetwithyourmobile
phone for the very first time, or
• afterpairingmorethan2Bluetoothdevices
withyourheadset.Yourheadsetcanstoreup
to 2 paired devices in its memory, if you pair
more than 2 devices the oldest paired device
is overwritten.
• “Pairing”isdifferentfrom“connecting”as
pairing typically only has to be done once,
whereas the phone and headset need to
“connect” every time one of the two devices
was turned off or out of range.