SHB9001WT www.philips.
Table of contents 8 Using more of your Bluetooth stereo headset Use with the audio cable Learn about the battery status Learn about simultaneous use for voice and audio Learn about FullSound 1 Important 1.1 Hearing safety 1.2 Electric-, Magnetic- and Electromagnetic Fields (“EMF”) 1.3 General maintenance 1.4 Disposal of your old product 1.5 Remove the integrated battery 1.6 Notice for the European Union 1.
1.1 1.2 Electric-, Magnetic- and Electromagnetic Fields ( EMF ) 1 Philips Electronics manufactures and sells many products targeted at consumers, which, like any electronic apparatus, in general have the ability to emit and receive electro magnetic signals.
1.3 General maintenance 1.5 Remove the integrated battery To avoid damage or malfunction: • Do not expose the headset to excessive heat. • Do not drop your headset. • Do not allow your headset to be submerged in water. • Do not use any cleaning agents containing alcohol, ammonia, benzene, or abrasives. If cleaning is required use a soft cloth, if necessary dampened with a minimum amount of water or diluted mild soap, to clean the product.
Notice for the European Union E N GLISH 1.6 Hereby, Philips Consumer Lifestyle, BU Accessories, declares that this Philips Bluetooth headset SHB9001WT is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. 1.7 Trademarks Trademarks are the property of Koninklijke Philips Electronics N.V. or their respective owners. The Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by Koninklijke Philips Electronics N.V.
2 What’s in the box: Bluetooth headset USB charging cable Pouch Quick start guide Audio cable 3 What else you’ll need: 4 What you can do with A mobile phone that is capable of Bluetooth stereo streaming, i.e. that is compatible with the Bluetooth A2DP profile. your headset Other devices (Notebooks, PDA’s, Bluetooth adapters, MP3 players etc.) are also compatible if they share the Bluetooth profiles supported by the headset.
E N GLISH 5 Overview of your Bluetooth stereo headset LED indicator light Adjustable headband Microphone Audio jack Mini USB charging jack 7
6 Get started 6.1 Charge your headset Before you use your headset for the first time, charge the battery for 6 hours for optimum battery capacity and lifetime. Warning Use only the original USB charging cable. Using another charger may damage or destroy your headset. Plug the USB charging cable into your computers USB socket and connect the charger cable to the headsets charging socket.
1 2 E N GLISH To pair your headset with your mobile phone Make sure the headset is charged, your mobile phone is turned on and its Bluetooth feature is enabled. Check your phones user guide to learn how to turn on Bluetooth on your phone. With the headset turned off, press until the LED starts blinking red and blue alternately. The headset will remain in “pairing mode” for 5 minutes. Pairing typically involves a few simple steps outlined below, please check your phones user guide for details.
7 Using your Bluetooth stereo headset 7.1 Connecting to your mobile phone Turn on the headset by pressing until the LED lights up. Once turned on the headset will reconnect automatically to the last device it was connected with. If the last connected device is not available the headset tries to reconnect to the penultimate device that was connected to the headset.
The table below shows how to operate your headset: Do this: Enter pairing mode Press until the LED starts blinking red / blue alternately Press for 2 seconds Turn headset on Turn headset off Play / Pause music Stop music Skip Fwd/Bwd FullSound Hold for min. 4 sec Tap Hold Tap or Hold and simultaneously for 4 sec.
7.4 Wearing your Bluetooth stereo headset The headband is fully adjustable to customize the fit to your liking. The soft slow recovery foam cushions provide excellent sound sealing and long lasting listening comfort. You can twist the earshell on its hinge for singlesided listening for DJ mixing and monitoring. Flat-fold the headphone by twisting both earshells and put it into the travel pouch for transport.
Bluetooth stereo headset 8.1 Use with the audio cable You can use your headset with non-Bluetooth enabled devices or on airplanes (in which the use of Bluetooth may be restricted) by taking advantage of the headsets audio jack. Corded operation does not require battery power for music listening. The microphone and the FullSound digital sound enhancement will not work via the audio cable. Finish your call before connecting the audio jack, as this will switch off battery power and cut an ongoing call. 8.
8.3 Learn about simultaneous use for voice and audio Your Bluetooth stereo headset can connect to • one Bluetooth audio device (supporting the A2DP and AVRCP Bluetooth profile) and • one Bluetooth communication device (supporting HFP or HSP Bluetooth profile) at the same time. Therefore you can connect your Bluetooth stereo headset.
E N GLISH 9 Technical data • Up to 17 hours of playtime or 18 hours of talk time • Up to 400 hours of standby time • Typical time for a full charge: 4 hours • Rechargeable Lithium-Polymer battery (460mAh) • Bluetooth 2.0+EDR, Bluetooth stereo support (A2DP – Advanced Audio Distribution Profile, AVRCP – Audio Video Remote Control Profile), Bluetooth mono support (HSP – Headset Profile, HFP – Hands-Free Profile) • FullSound digital sound enhancement • Digital echo & noise reduction • 3.
10 Frequently asked questions Bluetooth headset does not switch on. Battery is very low. Charge your Bluetooth headset. Bluetooth headset does not switch on. Audio cable is connected. Unplug the audio cable. No connection to mobile phone. Bluetooth disabled. Enable Bluetooth on your mobile phone and turn the headset on after turning on the phone. Mobile phone cannot find headset. • The headset may be connected to another previously paired device.
© 2011 Koninklijke Philips Electronics N.V. All rights reserved. Trademarks are the property of Koninklijke Philips Electronics N.V. or their respective owners.
Philips Consumer Lifestyle AQ95-56F-992KR/2n d 2008 ........................................................ (Report No. / Numéro du Rapport) ........................................................................... (Year in which the CE mark is affixed / Année au cours de laquelle le marquage CE a été apposé) EC DECLARATION OF CONFORMITY (DECLARATION DE CONFORMITE CE) We / Nous, PHILIPS CONSUMER LIFESTYLE B.V.
