SHB9000 www.philips.
Table of contents 1 1.1 1.2 1.3 1.4 1.5 1.6 1.7 2 Important Hearing safety Electric-, Magnetic- and Electromagnetic Fields (“EMF”) General maintenance Disposal of your old product Remove the integrated battery Notice for the European Union Trademarks in the box need 3 3 3 4 4 4 5 5 6 3 What else 6 4 What you can do with your headset 6 5 Overview of your Bluetooth stereo headset 7 6 6.1 6.
Important 1.1 Hearing safety Danger To avoid hearing damage limit the time you use the headphones at high volume and set the volume to a safe level. The louder the volume the shorter is the safe listening time. Be sure to observe the following guidelines when using your headphones. • Listen at reasonable volumes for reasonable periods of time. • Be careful not to adjust the volume continuously upwards as your hearing adapts. • Do not turn up the volume so high that you can’t hear what’s around you.
1.3 General maintenance 1.5 Remove the integrated battery To avoid damage or malfunction: • Do not expose the headset to excessive heat. • Do not drop your headset. • Do not allow your headset to be submerged in water. • Do not use any cleaning agents containing alcohol, ammonia, benzene, or abrasives. If cleaning is required use a soft cloth, if necessary dampened with a minimum amount of water or diluted mild soap, to clean the product.
Notice for the European Union ENGLISH 1.6 Hereby, Philips Consumer Lifestyle, BG P&A, declares that this Philips Bluetooth headset SHB9000 is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. Check the root folder of your user manual CD or an addendum sheet for the Declaration of Conformity. 1.7 Trademarks Trademarks are the property of Koninklijke Philips Electronics N.V. or their respective owners.
2 What’s in the box: SHB9000 Bluetooth headset USB charging cable Quick start guide Pouch 3 What else you’ll need: A mobile phone that is capable of Bluetooth stereo streaming, i.e. that is compatible with the Bluetooth A2DP profile. Other devices (Notebooks, PDA’s, Bluetooth adapters, MP3 players etc.) are also compatible if they share the Bluetooth profiles supported by the headset.
Overview of your Bluetooth stereo headset ENGLISH 5 LED indicator light Adjustable headband Microphone Audio jack Mini USB charging jack
6 Get started 6.1 Charge your headset Before you use your headset for the first time, charge the battery for 6 hours for optimum battery capacity and lifetime. Warning Use only the original USB charging cable. Using another charger may damage or destroy your headset. Plug the USB charging cable into your computers USB socket and connect the charger cable to the headsets charging socket.
1 2 ENGLISH To pair your headset with your mobile phone Make sure the headset is charged, your mobile phone is turned on and its Bluetooth feature is enabled. Check your phones user guide to learn how to turn on Bluetooth on your phone. With the headset turned off, press until the LED starts blinking red and blue alternately. The headset will remain in “pairing mode” for 5 minutes. Pairing typically involves a few simple steps outlined below, please check your phones user guide for details.
7 Using your Bluetooth stereo headset 7.1 Connecting to your mobile phone Turn on the headset by pressing until the LED lights up. Once turned on the headset will reconnect automatically to the last device it was connected with. If the last connected device is not available the headset tries to reconnect to the penultimate device that was connected to the headset.
The table below shows how to operate your headset: Do this: Enter pairing mode Press until the LED starts blinking red / blue alternately Press for 2 seconds Turn headset on Turn headset off Play / Pause music Stop music Skip Fwd/Bwd FullSound Hold for min. 4 sec Tap Hold Tap or Hold and simultaneously for 4 sec.
7.4 Wearing your Bluetooth stereo headset The headband is fully adjustable to customize the fit to your liking. The soft slow recovery foam cushions provide excellent sound sealing and long lasting listening comfort. You can twist the earshell on its hinge for singlesided listening for DJ mixing and monitoring. Flat-fold the headphone by twisting both earshells and put it into the travel pouch for transport.
Using more of your Bluetooth stereo headset 8.1 Use with the audio cable You can use your headset with non-Bluetooth enabled devices or on airplanes (in which the use of Bluetooth may be restricted) by taking advantage of the headsets audio jack. Corded operation does not require battery power for music listening. The microphone and the FullSound digital sound enhancement will not work via the audio cable.
8.3 Learn about simultaneous use for voice and audio Your Bluetooth stereo headset can connect to • one Bluetooth audio device (supporting the A2DP and AVRCP Bluetooth profile) and • one Bluetooth communication device (supporting HFP or HSP Bluetooth profile) at the same time. Therefore you can connect your Bluetooth stereo headset.
Technical data ENGLISH 9 • Up to 17 hours of playtime or 18 hours of talk time • Up to 400 hours of standby time • Typical time for a full charge: 4 hours • Rechargeable Lithium-Polymer battery (460mAh) • Bluetooth 2.0+EDR, Bluetooth stereo support (A2DP – Advanced Audio Distribution Profile, AVRCP – Audio Video Remote Control Profile), Bluetooth mono support (HSP – Headset Profile, HFP – Hands-Free Profile) • FullSound digital sound enhancement • Digital echo & noise reduction • 3.
10 Frequently asked questions Bluetooth headset does not switch on. Battery is very low. Charge your Bluetooth headset. Bluetooth headset does not switch on. Audio cable is connected. Unplug the audio cable. No connection to mobile phone. Bluetooth disabled. Enable Bluetooth on your mobile phone and turn the headset on after turning on the phone. Mobile phone cannot find headset. • The headset may be connected to another previously paired device.
2008 © Koninklijke Philips Electronics N.V. All rights reserved.
