Flite SHB4805 User manual Register your product and get support at www.philips.
Contents 1 Important safety instructions 2 Hearing Safety General information 2 Your Bluetooth wireless headphones What's in the box Other devices Overview of your Bluetooth wireless headphones 3 Get started Charge your headphones Pair the headphones with your mobile phone 4 Use your headphones Connect the headphones to a Bluetooth device Manage your calls and music Wear your headset 5 Technical data 2 2 3 3 3 4 5 5 5 6 6 6 7 8 6 Notice
1 Important safety instructions in traffic or other potentially dangerous environments. General information To avoid damage or malfunction: Caution Hearing Safety •• Do not expose headphones to excessive heat. •• Do not drop your headphones. •• Headphones shall not be exposed to dripping or splashing. •• Do not allow your headphones to be submerged in water. •• Do not use any cleaning agents containing alcohol, ammonia, benzene, or abrasives.
2 Your Bluetooth wireless headphones Congratulations on your purchase, and welcome to Philips! To fully benefit from the support that Philips offers, register your product at www.philips. com/welcome. With this Philips wireless headphones, you can: • enjoy convenient wireless handsfree calls; • enjoy and control wireless music; • switch between calls and music. Quick start guide Other devices A mobile phone or device (e.g.
Overview of your Bluetooth wireless headphones R 1 6 2 5 3 4 a Microphone b LED indicator c / Power on/off, pairing and mute button d Micro USB charging slot e +/Volume/Track control button f On/off, music/call control button Note •• The type plates are located under the headphones cushions.
3 Get started Charge your headphones Warning •• Only charge with certified USB adaptor DC 5V/0.5A. time, pair it with a mobile phone. A successful pairing establishes a unique encrypted link between the headphones and mobile phone. The headphones store the last 4 devices in the memory. If you try to pair more than 4 devices, the earliest paired device is replaced by the new one. 1 Make sure that the headphones are fully charged and turned off.
4 Use your headphones Manage your calls and music On/off Connect the headphones to a Bluetooth device 1 Make sure that the mobile phone is turned on and its Bluetooth feature is activated. 2 Press and hold / to turn the headphones on. »» The blue LED flashes for every 8 seconds. »» The headphones are reconnected to the last connected mobile phone/Bluetooth device automatically. If the last one is not available, the headphones try to reconnect to the second last connected device.
Other headphones indicator status Headphones status The headphones are connected to a Bluetooth device, while the headphones in standby mode or while you are listening to music. The headphones are ready for pairing. The headphones are on but not connected to a Bluetooth device. Low battery level. Battery is fully charged. Indicator Wear your headset Adjust the headband to fit your head. The blue LED flashes for every 8 seconds. The LED flashes blue and white alternately. The blue LED flashes quickly.
5 Technical data • • • • Music time: 13 hours Talk time: 13 hours Standby time: 166 hours Normal time for a full charge: 3 hours Rechargeable lithium polymer battery (240 mAh) Bluetooth 4.1, Bluetooth mono support (Headset Profile - HSP, Hands-Free Profile - HFP), Bluetooth stereo supported (Advanced Audio Distribution Profile - A2DP; Audio Video Remote Control Profile - AVRCP) Frequency range: 2.402-2.
6 Notice Declaration of conformity Hereby, Gibson Innovations declares that this product is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU. You can find the Declaration of Conformity on www. p4c.philips.com. Disposal of your old product and battery Inform yourself about the local separate collection system for electrical and electronic products and rechargeable batteries.
Environmental information All unnecessary packaging has been omitted. We have tried to make the packaging easy to separate into three materials: cardboard (box), polystyrene foam (buffer) and polyethylene (bags, protective foam sheet.) Your system consists of materials which can be recycled and reused if disassembled by a specialized company. Please observe the local regulations regarding the disposal of packaging materials, exhausted batteries and old equipment.
7 Frequently asked questions My Bluetooth headphones are connected to a Bluetooth stereo enabled mobile phone, but music only plays on the mobile phone speaker. Refer to the user manual of your mobile phone. Select to listen to music through the headphones. My Bluetooth headphones do not switch on. The battery level is low. Charge the headphones. The audio quality is poor and crackling noise can be heard. The Bluetooth device is out of range.
Copyright © Gibson Innovations Limited 2017. All rights reserved This product has been manufactured by, and is sold under the responsibility of Gibson Innovations Ltd., and Gibson Innovations Ltd. is the warrantor in relation to this product. Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V. and are used under license UM_SHB4805_00_EN_V1.
