Flite SHB4205 User manual Register your product and get support at www.philips.
Contents 1 Important safety instructions 2 Hearing Safety General information 2 Your Bluetooth in-ear headphones What's in the box Other devices Overview of your Bluetooth inear headphones 3 Get started Charge your headphones Pair the headphones with your mobile phone 4 Use your headphones Connect the headphones to a Bluetooth device Manage your calls and music 2 2 3 3 3 3 5 5 5 6 6 6 5 Technical data 8 6 Notice 9 9 Declaration of confor
1 Important safety instructions Hearing Safety General information To avoid damage or malfunction: Caution •• Do not expose headphones to excessive heat. •• Do not drop your headphones. •• Headphones shall not be exposed to dripping or splashing. •• Do not allow your headphones to be submerged in water. •• Do not use any cleaning agents containing alcohol, ammonia, benzene, or abrasives.
2 Your Bluetooth in-ear headphones Congratulations on your purchase, and welcome to Philips! To fully benefit from the support that Philips offers, register your product at www.philips. com/welcome. With this Philips wireless in-ear headphones, you can: • enjoy convenient wireless handsfree calls; • enjoy and control wireless music; • switch between calls and music. What's in the box Quick start guide Other devices A mobile phone or device (e.g.
e Volume/Track control button f Music/call control button 4 EN
3 Get started Charge your headphones earliest paired device is replaced by the new one. 1 Make sure that the headphones are fully charged and turned off. 2 Press and hold for 6 seconds until the blue and white LED flashes alternately. »» The headphones remain in pairing mode for 5 minutes. 3 Make sure that the mobile phone is turned on and its Bluetooth feature is activated.
4 Use your headphones Manage your calls and music On/off Connect the headphones to a Bluetooth device 1 Turn on your mobile phone/Bluetooth device. 2 Press and hold for 2 seconds to turn the headphones on. »» The blue LED flashes. »» The headphones are reconnected to the last connected mobile phone/Bluetooth device automatically. If the last one is not available, the headphones try to reconnect to the second last connected device. Task Turn the headphones on. Button Turn the headphones off.
Reject an incoming call. Press and hold for 3 seconds. »» 1 beep. Press twice. Switch caller during a call. Mute/unmute the microphone in a call. Press twice. Voice control Task Siri/Google Now. Button Operation Press and hold for 6 seconds. Other headphones indicator status Headphones status The headphones are connected to a Bluetooth device, while the headphones in standby mode or while you are listening to music. The headphones are ready for pairing.
5 Technical data • • • • Music time: 7 hours Talk time: 7 hours Standby time: 160 hours Normal time for a full charge: 2 hours Rechargeable lithium polymer battery (120 mAh) Bluetooth 4.1, Bluetooth mono support (Headset Profile - HSP, Hands-Free Profile - HFP), Bluetooth stereo supported (Advanced Audio Distribution Profile - A2DP; Audio Video Remote Control Profile - AVRCP) Frequency range: 2.402-2.
6 Notice Declaration of conformity Hereby, Gibson Innovations declares that this product is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU. You can find the Declaration of Conformity on www.p4c.philips.com. electronic products and rechargeable batteries. Follow local rules and never dispose of the product and rechargeable batteries with normal household waste.
materials: cardboard (box), polystyrene foam (buffer) and polyethylene (bags, protective foam sheet.) Your system consists of materials which can be recycled and reused if disassembled by a specialized company. Please observe the local regulations regarding the disposal of packaging materials, exhausted batteries and old equipment. Trademarks Bluetooth The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc.
7 Frequently asked questions My Bluetooth headphones are connected to a Bluetooth stereo enabled mobile phone, but music only plays on the mobile phone speaker. Refer to the user manual of your mobile phone. Select to listen to music through the headphones. My Bluetooth headphones do not switch on. The battery level is low. Charge the headphones. The audio quality is poor and crackling noise can be heard. The Bluetooth device is out of range.
2017 © Gibson Innovations Limited. All rights reserved. This product has been manufactured by, and is sold under the responsibility of Gibson Innovations Ltd., and Gibson Innovations Ltd. is the warrantor in relation to this product. Philips and the Philips’ Shield Emblem are registered trademarks of Koninklijke Philips N.V. UM_SHB4205_00_EN_V1.
