3% ?)&5?%. BOOK 0AGE &RIDAY $ECEMBER 0- %.
ΣΕ435_ΙΦΥ_ΕΝ.
Contents 4 4 4 4 5 6 6 9 10 12 13 17 21 26 31 33 41 43 49 55 58 59 66 69 70 EN Important Information For your safety Installation requirements Need Help? What’s in the box? Your SE735 Overview of the handset Overview of the base station Main features of your SE735 Connect Install USB Connection Call Phonebook Call log SMS Clock & Alarm Personal Settings Advanced Settings Network Services Games Telephone Answering Machine (TAM) Troubleshooting Information Index 3
Important Information EN For your safety This equipment is not designed to make emergency calls in the event of a power failure. Alternative arrangements should be made for access to emergency calls. To avoid damage or malfunction: - Do not allow the product to come into contact with liquid. Do not open it as you could be exposed to high voltages. Never use any battery type other than the one supplied.
What’s in the box? EN The following accessories are included with your SE735: Handset Belt clip Warranty card Base station Battery door User Guide Power supply for base station Headset Quick Start Guide Line cord 2 AAA rechargeable batteries USB cable Installation CD The line adaptor may not be attached to the line cord. In this case, you have to connect the line adaptor to the line cord first before plugging the line cord to the line socket.
Your SE735 EN Overview of the handset Earpiece LCD Screen Up/Down Navigation keys Event LED Right Soft key Left Soft key headset jack Talk key Hang-up key Alphanumeric keypad Case key / Pause key / Ringer off key Keypad lock key Loudspeaker key Intercom key Microphone USB socket 6
Your SE735 EN Handset keys Press To m Enter the main menu from stand-by mode. Select the function displayed on the handset screen directly above it. Activate mute function during a call. Switch on the backlight. (Left soft key) > (Right soft key) r e Go to redial list from stand-by mode. Select the function displayed on the handset screen directly above it. Initiate a second call, call transfer or consult the phonebook during a call. Switch on the backlight.
Your SE735 EN Display icons & symbols In stand-by mode, several icons & symbols may be displayed on the handset. The handset is registered and within range of the base station. It blinks when the handset is out of range or is searching for a base. Battery symbol indicating 3 different battery levels. The ringer volume is set to zero. The keypad is locked. There is an external incoming call, an external call is connected or an external call is held.
Your SE735 EN Overview of the base station Volume keys Time Message number Delete key Next message key Paging key SIM card tray Answer Machine On/Off key Previous message/ Play/Stop key Replay message key Base station keys c o v x Page handset. Long press to start registration procedure. p l Play phone messages (the first recorded will be played first). Stop message playback. r Skip to the next message during message playback. Short press to turn the answering machine On/Off.
Your SE735 EN LCD Message counter Displays current time when the answering machine is switched off or in stand-by mode. Displays date & time of recording and message number during playback. Blinking: Indicates number of new messages. Steady: Indicates number of old messages. 2 bars flashing: Indicates that there is no more memory left. Indicates the volume level (L0 - L9) when v is pressed. Indicates the current message number during playback.
Your SE735 EN Menu navigation The basic steps of navigating through the menus and options are as follows: Task Action Enter main menu/menu options Choose MENU by pressing the key directly below it (left soft key m) Illustration 1 Philips 18:00 08-08 MENU m • Go to a specific menu/option 1. Press : key to scroll to your desired menu/option • Confirm your selection 2.
Connect EN The location of your base station can have an effect on the range and performance of your SE735 (see TIP below). Connecting the Base Station 1. Place the base station in a central location near the telephone line socket and electricity sockets. 2. Connect the line cord and the power cable to the proper connector at the back of the base station. 1. B A 2. Connect the power supply A Connect the line cord to the line socket B 3.
Install EN Install battery Your SE735 is supplied with 2 rechargeable batteries allowing approximately up to 12 hours of talk-time and up to 168 hours stand-by time. Before using the handset, the batteries have to be installed and fully charged. 1. Slide out the battery cover. 2. Place the batteries as indicated and replace the cover. Charge battery 1. Place the handset on the charging cradle of the base station. A beep is emitted if the handset is placed correctly. 2.
Install EN Out of range warning The indoor and outdoor range of the phone is up to 50 metres and 300 metres respectively. When the handset moves beyond operation range, the antenna icon will blink. Attach/Remove belt clip A belt clip allows you to carry your handset on your belt. 1. To attach the belt clip to your handset, fit the tabs on the belt clip into the slots at the back of the handset and push into place. 2. To remove the belt clip, simply pull the clip away from the handset.
Install 3. Press mSELECT to enter Set Date/Time. 4. Enter current time (HH:MM) and current date (DD/MM/YY) and press mOK. EN WARNING If your phone is connected to an ISDN line through an adaptor, the date & time may be updated after each call. The availability of date & time update is dependent on your network provider. Please check the date & time settings in your ISDN system or contact your network provider. Now, you are ready to use your phone.
Install EN Screen and keypad backlight The backlight remains on for 20 seconds after each activation such as an incoming call, key presses, lifting up the handset off the base station, etc. The colour of the LCD and keypad backlight is WHITE. For setup details, please refer to "Backlight time" on page 48. Event LED The event LED on your handset blinks when there is a new message recorded on your telephone answering machine.
USB Connection EN USB connection Your SE735 is able to download melodies (maximum 20 KB, in MIDI format), wallpapers (128 x 160 pixels), as well as portrait pictures for fotocall (96 x 64 pixels) from your PC to your handset via USB connection. There are also a number of ring melodies, wallpaper and fotocall pictures pre-installed in your handset and the installation CD. Before you can download PC files to your handset, you need to install the Download Software. Install USB download software 1.
USB Connection EN Connect the handset to your PC USB connection can only be established when the handset is in stand-by mode and the backlight is switched on. If the handset is in menu mode or goes into screensaver mode, press e key or any key to return to stand-by mode before you connect the handset to the PC. To connect the handset to your PC, plug one end of the USB jack into the USB socket at the bottom of the handset, and then plug the other end of the USB jack to the USB port of your PC.
USB Connection Ringtone icon EN Selection window Download button Play button Progress bar 3. Select the MIDI file you wish to download from the selection window and click the PLAY button to listen to the MIDI file to make sure it is the correct ring melody you wish to download onto your handset. 4. Make sure that the handset is connected to the PC and click the Download button. A progress bar is displayed to indicate the download progress. 5.
USB Connection EN 4. The image will appear in the Image window and the actual size will be displayed. You may resize the image in the Image window and select which part of the image to be used as wallpaper. You can also preview the image in the Preview window to make sure this is how you would like your wallpaper to appear on your handset. 5. Make sure that the handset is connected to the PC and click the Download button. A progress bar is displayed to indicate the download progress. 6.
Call EN Make a call Predialling 1. Enter the phone number (maximum 20 digits). 2. Press r to dial the number. Direct dialling 1. Press r or v to take the line. 2. Enter the phone number. Call from redial list 1. Press >REDIAL in stand-by mode. 2. Scroll : to an entry in the redial list. 3. Press r to dial the number. TIP The handset stores the last 7 numbers dialled. The last number dialled will appear first in the redial list.
Call EN Handsfree answering When the phone rings, press v key. Incoming call has priority over other events. Whenever there is an incoming call, other status in progress such as phone setting, menu navigation, etc will be aborted. TIP If Auto Pick-up mode (see page 47) is activated, you can simply lift up the handset from its base station to answer the call. This feature is deactivated by default.
Call EN Adjust loudspeaker volume 1. Press : key to select from Volume 1 to Volume 5. Initiate a second call (subscription dependent) 1. Press >OPTION and select Init 2ND Call to put the current call on hold and initiate a second external call. Transfer call (subscription dependent) 1. Press >OPTION and select Call Transfer. The screen shows R4. 2. Enter the phone number that you want to transfer your incoming calls to. Consult phonebook 1.
Call EN Switch between an internal and external call Press c key once to switch between an internal call and external call. 1. Three-party conference call The conference call feature allows one external call to be shared with two handsets (in intercom). The three parties can share the conversation and no network subscription is required. 1. Press and hold c to put the external call on hold and start the intercom procedure (the caller can no longer hear you). 2.
Call EN Fotocall This feature allows you to link a picture to a contact in your phonebook. If you have subscribed to Caller Line Identification service from your network operator, when the contact calls you, the name of the caller will appear along with the corresponding picture on the handset screen and the melody defined for that contact will ring. There are 20 fotocall pictures pre-installed on your handset.
Phonebook EN Phonebook New Entry List Edit Entry Delete Entry Delete All Direct Memory Copy from SIM Phbk transfer Your SE735 can store up to 250 phonebook memories, including 10 direct access memories (0 to 9). Each phonebook entry can have a maximum of 20 digits for the phone number and 14 characters for name. Access phonebook 1. Press d in stand-by mode or press mMENU, scroll : to Phonebook and press mSELECT, scroll : to List and press mSELECT. 2.
Phonebook 6. EN : to the picture you wish to associate with the contact or select No Picture and press mSELECT. Scroll A validation tone is emitted. If you have selected a picture for the contact and have subscribed to Caller Line Identification service from your network provider, the phone will display the picture and name of the contact on the handset screen when the contact calls you. You can assign individual contacts to specific groups of your choice.
Phonebook EN Store direct access memory You can store up to 10 direct access memories (Key 0 to mode will automatically dial the stored phone number. 9). A long press on the keys in stand-by 1. Press mMENU, scroll : to Phonebook and press mSELECT, scroll : to Direct Memory and press mSELECT. 2. Select a key (Key 0 to Key 9) and press name will be displayed. 3.
Phonebook 2. EN Slide the SIM card between the retaining clips, microchip facing up, until it stops. 3. Put the SIM card tray back in the slot on the base station and push into place until it latches. 4. On the handset, press mMENU, scroll from SIM and press mSELECT. 5. Scroll : to Copy All or Select Entry. If you choose Copy All then all entries in the SIM card will be copied to your phonebook.
Phonebook EN If you choose Select Entry, you can browse the phonebook entries and select the ones you wish to copy. For each selected entry, you will be prompted on the selected handsets whether or not to overwrite the phonebook entry in the target phonebook. OVERWRITE? will be displayed on the selected handsets, press cancel. mYES to confirm or >NO to 3. Press mSELECT to confirm. 4. The handset numbers which are available for transfer will be displayed.
Call log EN The call log offers quick access to the Call List, Answ. Machine and SMS sub-menus. The Call List records the last 30 entries of your incoming calls. If you have subscribed to Caller Line Identification service, the identity of the caller (caller’s number or name) will be displayed together with the date and time of the call. The calls (missed and received) are displayed in chronological order with the most recent call at the top of the list.
Call log EN Access redial list 1. Press >REDIAL in stand-by mode and scroll : to view the entries. View details of a redial list entry 1. Press >REDIAL in stand-by mode and scroll : to select an entry. 2. Press mMENU and press mSELECT to View. Save redial list entry to phonebook 1. Press >REDIAL in stand-by mode and scroll : to select an entry. 2. Press mMENU, scroll : to Save number and press mSELECT. 3. Enter name and press mOK. 4. Edit number if necessary and press mOK. 5.
SMS EN SMS Write a SMS Inbox Draft box SMS Settings SMS stands for Short Message Service. To benefit from this service, you must subscribe to Caller Line Identification Service (CLI) together with SMS service from your network provider. SMS messages can be exchanged with a phone (mobile or compatible fixed lines), provided the receiver has also subscribed to CLI and SMS services. The factory settings on your SE735 correspond to the main national operator.
SMS EN Key 1 2 3 4 5 6 7 8 9 0 * 4. Operation space 1 @ _ # = < > ( ) & € £ $ ¥ [ ] { } ¤ § abc2àäçåæ def3éè∆Φ ghi4 ìΓ jkl5Λ mno6ñòö pqrs7βΠΘΣ tuv8ùü wxyz9øΩΞΨ .0,/:;"’!¡?¿.+-%\^~| * Enter the text and press mOK. You can enter up to 160 characters for an SMS. If you receive a call while writing an SMS, the operation will be interrupted. When you go back to SMS editing, the message will be retrieved automatically. 5. Enter the destination phone number and press mOK.
SMS 7. EN Press mSELECT to Send the message. The message will be sent immediately. SMS Sent! will be displayed if the message has been sent successfully. If the message cannot be sent successfully, the screen will display SMS not Sent! and the message will be saved in the SMS editor buffer. WARNING When composing your SMS, if no keys are pressed for 30 seconds, the handset will return to stand-by mode. The edited message will be automatically saved in the SMS editor buffer.
SMS EN Press r while viewing the message content/sender number/date/time stamp will abort the SMS function and dial the sender’s phone number. Press e to return to Inbox message list. Reply to an Inbox message 1. While viewing the message content, press mMENU to display the Inbox menu options. 2. Scroll : to Reply and press mSELECT to start editing. 3. After editing, press mOK to confirm the message. 4.
SMS EN Draft box SMS messages that are saved as drafts will be automatically stored in the Draft box. The Draft box can store up to 20 messages. Save a message in the Draft box 1. After writing the message, entering the phone number and the desired box, press mOK. 2. Scroll to Save as draft. 3. Press mSELECT to confirm. Review Draft messages 1. Press mMENU, press mSELECT to enter SMS, scroll : to Draft box and press mSELECT. 2. Scroll : to your desired box number and press mSELECT (only for UK).
SMS EN Delete all Draft messages 1. While viewing the message content, press mMENU to display the Draft box menu options. 2. Scroll : to Delete All and press mSELECT. 3. Press mSELECT again to confirm deletion. SMS settings This menu allows you to set up the server for sending and receiving SMS messages. Your SE735 can receive messages from 3 service centers. Each service center consists of 2 numbers: - Incoming number - Outgoing number The maximum length of an incoming/outgoing number is 20 digits.
SMS 5. EN Enter PIN again and press mOK. You can choose to leave the PIN empty. If no PIN is required, simply press mOK when prompted to enter PIN. 6. Enter the SMS box number and press mOK. If the number entered already exist, an error tone is emitted. If the number entered is accepted, a validation tone is emitted and the screen returns to SMS boxes list. To change the password of an SMS Box (only for UK) 1.
SMS EN 3. Enter the number and press mOK to confirm. A validation tone is emitted. The maximum length of an outgoing number is 20 digits. To set incoming number 1. Press mMENU, press mSELECT to enter SMS, scroll : to SMS Settings and press scroll : to SMS Center 1, SMS Center 2 or SMS Center 3 and press mSELECT. 2. Scroll : to Incoming Nr. and press mSELECT. 3. Enter the number and press mOK to confirm. A validation tone is emitted. mSELECT, The maximum length of an incoming number is 20 digits.
Clock & Alarm EN Clock & Alarm Set Date/Time Alarm Alarm Tone Do not Disturb Set date and time 1. Press mMENU, scroll Set Date/Time. : to Clock & Alarm and press mSELECT, press mSELECT again to enter 2. Enter the current time (HH:MM) and current date (DD/MM/YY) and press mOK. Enter the date in Day/Month/Year format and the time in 24-hour format. 3. A validation tone is emitted and the screen returns to Clock & Alarm menu.
Clock & Alarm EN Do not Disturb mode This feature is available only if you have subscribed to Caller Line Identification from your network provider. When Do not Disturb mode is activated, the phone will ring only when there are calls received from authorised groups. For all other callers, the phone will display an incoming call message or the backlight will be turned on, but it will not ring. If the telephone answering machine is activated, it will answer the call to allow the caller to leave a message.
Personal Settings EN Personal Set Handset Tones Wallpaper View Foto Pic Contrast Handset Name Auto Pick-up Auto Hang-up Language Babysit Mode Backlight Time Theme Colour Handset Tones Ring Volume There are 5 ringer volume options (Silence, Low, Medium, High and Progressive). The default level is Medium. To set ring volume 1. Press mMENU, scroll : to Personal Set and press mSELECT, press mSELECT to enter Handset Tones and press mSELECT again to enter Ring Volume. 2.
Personal Settings EN 3. Press mSELECT to set the ring melody. A validation tone is emitted and the screen returns to previous menu. My Melody You can add an additional ring melody (maximum 20 KB) or replace it by downloading a new melody from your PC to your handset via USB connection (see "USB Connection" on page 17). You can also record your own ring melody (see page 45). To set My Melody 1.
Personal Settings EN SMS Tone A tone is emitted when a new SMS is received. You can enable or disable the SMS Tone. By default, SMS tone is On. To set SMS tone On/Off 1. Press mMENU, scroll : to Personal Set and press mSELECT, press mSELECT to enter Handset Tones, scroll : to SMS Tone and press mSELECT. 2. Scroll : to On or Off and press mSELECT to confirm. A validation tone is emitted and the screen returns to previous menu. Record Melody There are 16 ring melodies available on your handset.
Personal Settings EN View Foto Pic There are 20 fotocall pictures pre-installed on your handset. You can use this feature to view all your fotocall pictures. To view your fotocall pictures Press mMENU, scroll : to Personal Set and press mSELECT, scroll : to View Foto Pic and press mSELECT. 2. Scroll : to view your fotocall pictures. 1. You can download and overwrite any existing fotocall picture via USB connection (see "USB Connection" on page 17).
Personal Settings EN Auto Pick-up This function enables you to answer a call automatically by simply lifting the handset from the base station. By default, the Auto Pick-up feature is Off and in this case you have to press the r key to answer a call. To set Auto Pick-up mode Press mMENU, scroll : to Personal Set and press mSELECT, scroll : to Auto Pick-up and press mSELECT. 2. Scroll : to On or Off and press mSELECT to confirm. 1. A validation tone is emitted and the screen returns to previous menu.
Personal Settings EN To activate Babysit mode 1. Press mMENU, scroll : to Personal Set and press mSELECT, scroll : to Babysit mode and press mSELECT. In Babysit mode, all keys are deactivated except for mMENU key. Babysit mode is displayed on the screen when this function is activated and the handset cannot perform any normal operation (making an outgoing call, receiving an incoming call, intercom another handset, paging, etc.). 2.
Advanced Settings EN Advanced Set Recall Time Dial Mode Call Barring Baby call Registration Select Base Unregistration Change PIN Reset Auto prefix Conference Demo Mode Recall Time Recall time (or dial delay) is the time delay by which the line will be disconnected after you press can be set to short, medium or long. r key. It The default value of recall time that is preset in your SE735 should be the best suited for your country network and therefore you should not need to change it.
Advanced Settings EN Dial Mode (only for UK) The default value for dial mode that is preset in your SE735 should be the best suited for your country network and therefore you should not need to change it. There are 2 dial modes: Tone or Pulse To set dial mode Press mMENU, scroll : to Advanced Set and press mSELECT, scroll : to Dial Mode and press mSELECT. 2. Scroll : to Tone or Pulse and press mSELECT to confirm. 1. A validation tone is emitted and the screen returns to previous menu.
Advanced Settings EN Baby Call When activated, the Baby Call feature enables you to dial a number by pressing any key on your handset. This feature is very useful for direct access to emergency services. You can enter up to 20 digits for baby call number. To activate Baby Call mode Press mMENU, scroll : to Advanced Set and press mSELECT, scroll : to Baby call and press mSELECT. 2. Enter the Master PIN when prompted and press mOK to confirm. 1. The default Master PIN number is 0000. 3.
Advanced Settings EN To register an additional handset 1. On the base station, press and hold done within 1 minute. c for 3 seconds. After that, the registration procedure has to be Within 1 minute, the base station is able to accept registration from a handset. If no action is taken on the handset within 10 seconds, the registration procedure will be aborted. 2. At the same time, on the handset, press mMENU, scroll scroll : to Registration and press mSELECT. : to Advanced Set and press mSELECT, 3.
Advanced Settings EN Change Master PIN The Master PIN is used for setting call barring/baby call number, registration/unregistration of handsets and for accessing the answering machine remotely. The default Master PIN number is 0000. The length of the PIN is 4 digits. This PIN is also used to protect the settings of your handset. Your handset will prompt you whenever the PIN is required.
Advanced Settings EN Conference Mode When Conference mode is activated, you can initiate a three-party conference call with a second handset registered to your base station automatically if the second handset takes the line when there is already an external call in progress. The default setting for this mode is Off. To activate/deactivate conference mode Press mMENU, scroll : to Advanced Set and press mSELECT, scroll : to Conference and press mSELECT. 2.
Network Services EN Net. Service Call Forward Call Fwd Busy Call Fwd UnAns Voice Mail Call Back Cancel Call Bk Withhold ID This menu provides a convenient means for you to access, activate or deactivate some network services that are country/subscription dependent. Contact your network provider for more information about these services. The default numbers and values that are preset in your SE735 should be the best suited for your country network and therefore you should not need to change them.
Network Services EN 3. Scroll : to Deactivate and press mSELECT to confirm. 4. The number for that selected service will be dialled. 5. When the number has been dialled, press e to return to stand-by mode. Voice Mail This feature allows the caller to leave a voice message when you are unable, or do not wish to take a call yourself. The availability of this feature is dependent on your country and your subscription with your network provider.
Network Services EN Cancel Call Back Setting Press mMENU, scroll : to Net. Service and press mSELECT, scroll : to Cancel Call Bk and press mSELECT. 2. Scroll : to Settings and press mSELECT. 3. Enter the required number for cancelling of call back and press mOK. 1. Activate Cancel Call Back Press mMENU, scroll : to Net. Service and press mSELECT, scroll : to Cancel Call Bk and press mSELECT. 2. Press mSELECT to Activate. 1. 3. The number for that selected service will be dialled. 4.
Games EN Games Memory Snake Tetris Memory The objective of this game is to find and match different pairs of graphics in the shortest possible time using your memory. To win, you have to complete matching all 8 pairs of graphics in a 4x4 matrix. To start the game 1. 2. Press mMENU, scroll : to Games and press mSELECT, press mSELECT to enter Memory game. An instruction screen is displayed. Press 2 / 4 / 6 / 8 keys to move up / left / right / down respectively. Press 5 to select to open the card. 3. 4.
Telephone Answering Machine (TAM) EN Answer Machine Play Delete All Record Memo Answ. Mode Ans. On/Off Ans. Settings Your SE735 features an answering machine that records unanswered calls when it is activated. The answering machine can store up to 99 messages within the maximum recording time of 30 minutes. The maximum recording time for each message is 3 minutes.
Telephone Answering Machine (TAM) EN x Delete current message during message playback. p l Play phone messages (the first recorded will be played first). Long press to delete all messages when TAM is in stand-by mode (unread messages will not be deleted). Stop message playback. Go to previous message if pressed within 1 second of current message playback. Replay current message if pressed after 1 second of current message playback. r Skip to the next message during message playback.
Telephone Answering Machine (TAM) TIP You can also playback messages by pressing u key in stand-by mode, scroll Machine and press mSELECT, press mSELECT again to Play. EN : to Answer Playback of old messages via handset Old messages can only be played if there are no new messages. The first recorded message will be played first and the next message will be played automatically until there are no more messages. 1. Press mMENU, scroll : to Answer Machine and press mSELECT, press mSELECT to enter Play. 2.
Telephone Answering Machine (TAM) EN Set Outgoing Messages (OGM) 1. If you set the answering mode as Answer Only or Answ. & Record, you can choose to set your outgoing message as Predefined or Personalised. 2. The current selected mode is highlighted. 3. To change it, scroll : to your selection and press mSELECT. Predefined Outgoing Messages Press mSELECT to set your outgoing message as Predefined, you can press mSELECT again to play the outgoing message.
Telephone Answering Machine (TAM) EN Add VIP numbers 1. Press mMENU, scroll press mSELECT. : to Answer Machine and press mSELECT, scroll : to Answ. Mode and 2. Scroll : to VIP Mode and press mSELECT. 3. Press mSELECT to enter the VIP List. 4. The numbers in the VIP list will be displayed. If it has not been set before, the screen will display Empty. 5. Scroll : to select an entry and press mSELECT. 6. Press mSELECT to select Add. 7. Scroll list. 8.
Telephone Answering Machine (TAM) EN Scroll : to your desired ring delay setting (1 to 7 rings or Toll saver) and press mSELECT to confirm. 2. Toll saver mode can save you the cost of a long-distance call when you check your messages remotely. If there are new messages in your answering machine, the outgoing message will start playing after 3 rings. If there are no new messages, the outgoing message will be played after 5 rings.
Telephone Answering Machine (TAM) 4 0 EN Delete current message. Turn the answering machine on/off. Call screening Handset call screening If Handset Call screening is set to On, you may press v to switch between the loudspeaker and earpiece mode. If you decide to pick up the call, press r. Once the call has been picked up, the recording will stop automatically. If you press e, the call will be cut off and the recording will be ignored. Set Handset Call Screening 1.
Troubleshooting EN Troubleshooting of the phone Please refer to the following website for more information on Philips web support: www.philips.
Troubleshooting EN Problem Causes Solution The handset displays “not available” • The procedure to add a handset has failed • Try again by disconnecting and connecting the base station power supply and follow the procedure to register a handset (see page 51) • Remove and place back the handset batteries • when attempting to add another handset to the base station • Maximum number of handsets (6) has been reached • Unregister a handset so as to register the new handset • when using a handset • Ba
Troubleshooting EN Troubleshooting of the Answering Machine Problem Causes Solution The answering machine does not record messages • Memory is full • Delete old messages • The ANSWER ONLY mode has been activated • Activate Answ.
Information EN Electric, Magnetic and Electromagnetic Fields ("EMF") 1. Philips Royal Electronics manufactures and sells many consumer oriented products which usually, as with any electronic apparatus, have the ability to emit and receive electro magnetic signals. 2.
Index EN A Accessories 5 Alarm 41 Alarm tone 41 Answer a call 15, 21 Answering machine 59 Auto Hang-up 47 Auto Pick-up 47 Auto Prefix 53 B Baby Call 51 Babysit mode 47 Backlight 16 Backlight time 48 Basic operations 12 Battery level 13 Battery life and range 13 C Call Back 56, 57 Call Barring 50 Call Forward 55 Call log 21, 31 Caller Line Identification 24 Calls in-progress 22 Charge battery 13 Clock & Alarm 41 Conference 54 Conference Mode 54 Conference call 24 Configure handset 14 Conformity 69 Connect B
ΣΕ435_ΙΦΥ_ΕΝ.βοοκ Παγε 3 Φριδαψ, ∆εχεµβερ 16, 2005 1:15 ΠΜ Specifications are subject to change without notice. Trademarks are the property of Koninklijke Philips Electronics N.V. or their respective owners. 2006 © Koninklijke Philips Electronics N.V. All rights reserved. www.philips.
