Welcome EN Quick start guide 1 Connect 2 Install 3 Enjoy
What’s in the box Handset Power supply for base station Base station Line cord Belt clip 2 AAA rechargeable batteries Battery door User Guide Quick Start Guide Warranty card USB cable Headset Installation CD The line adaptor may not be attached to the line cord. In this case, you have to connect the line adaptor to the line cord first before plugging the line cord to the line socket.
EN 1 Connect Connect the base station 1. Place the base station in a central location near the telephone line socket and electricity sockets. 2. Connect the line cord and the power cable to the proper connector at the back of the base station. B 1. A 2. Connect the power supply A A Connect the line cord to the line socket B 3. Connect the other end of the line cord to the telephone line socket and the other end of the power cable to the electricity socket.
3 Enjoy Make a call Enter the phone number and press r. OR Press r and enter the phone number. Answer a call When the phone rings, press r key. End a call Press e key. Adjust earpiece volume during a call Press : to select from Volume 1 to Volume 5. Set the ring melody 1. Press mMENU, scroll : to Personal Set and press mSELECT, press Handset Tones, scroll : to Ring Melody and press mSELECT. 2. Scroll : to your desired melody to play the melody. 3. Press mSELECT to set the ring melody.
EN Switch the handset On/Off Press and hold e key for 3 seconds to switch off the handset in stand-by mode. Short press e key to switch on the handset again. Keypad lock/unlock Press and hold * key for 2 seconds to lock or unlock the keypad in stand-by mode. Paging 1. Short press c key on the base. The handset starts to ring. 2. Once retrieved, press any key on the handset to end the paging. Press To m Enter the main menu from stand-by mode.
Troubleshooting For more information, please refer to p.58 of SE730 user manual and p.66 of SE735 user manual.
