3% ?)&5?%. BOOK 0AGE &RIDAY $ECEMBER 0- %.
ΣΕ435_ΙΦΥ_ΕΝ.
SE635_IFU_EN.
SE635_IFU_EN.book Page 4 Monday, September 25, 2006 12:44 PM Important Information EN For your safety In the event of a power failure, you cannot use this handset to make or receive calls. Alternative arrangements should be made for access to emergency calls. Your PIN code is preset to 0000. If you change your PIN code, keep the PIN details in a safe place where you have easy access to them. Do not lose the PIN code.
SE635_IFU_EN.book Page 5 Monday, September 25, 2006 12:44 PM What’s in the box? EN The following accessories are included with your SE635: Handset 2 AAA rechargeable batteries Base station Battery door Power supply for base station User Guide Quick Start Guide Line cord Warranty card The line adaptor may not be attached to the line cord. In this case, you have to connect the line adaptor to the line cord first before plugging the line cord to the line socket.
SE635_IFU_EN.book Page 6 Monday, September 25, 2006 12:44 PM Your SE635 EN Overview of the handset Earpiece Up/Down Navigation keys LCD Screen Event LED Left Soft key Right Soft key Talk key Hang-up key Alphanumeric keypad Keypad lock key Case key / Pause key / Ringer off key Loudspeaker key Intercom key .
SE635_IFU_EN.book Page 7 Monday, September 25, 2006 12:44 PM Your SE635 EN Handset keys Press To m Enter the main menu from stand-by mode. Select the function displayed on the handset screen directly above it. Activate mute function during a call. > r e Go to redial list from stand-by mode. Select the function displayed on the handset screen directly above it. Answer an incoming external or internal call. Insert R for operator services when on the line. Hang up a call.
SE635_IFU_EN.book Page 8 Monday, September 25, 2006 12:44 PM Your SE635 EN Display icons & symbols In stand-by mode, several icons & symbols may be displayed on the handset. The handset is registered and within range of the base station. It blinks when the handset is out of range or is searching for a base. Battery symbol indicating 3 different battery levels. The ringer volume is set to zero. There is an external incoming call, an external call is connected or an external call is held.
SE635_IFU_EN.book Page 9 Monday, September 25, 2006 12:44 PM Your SE635 EN Overview of the base station Volume keys Next message key Delete key Paging key SIM card tray Previous message/ Replay message key Answer Machine On/Off key Play/ Stop key Base station keys c o v x Page handset. Long press to start registration procedure. Long press to turn the answering machine On/Off. Increase speaker volume during message playback. Reduce speaker volume during message playback.
SE635_IFU_EN.book Page 10 Monday, September 25, 2006 12:44 PM Your SE635 EN LED Message counter No display: Indicates that the answering machine is switched off. Blinking: Indicates number of new messages. Steady: Indicates number of old messages. 2 bars flashing: Indicates that there is no more memory left. Indicates the volume level (L0 - L9) when v is pressed. Indicates the current message number during playback.
SE635_IFU_EN.book Page 11 Monday, September 25, 2006 12:44 PM Your SE635 EN Menu navigation The basic steps of navigating through the menus and options are as follows: Task Enter main menu/menu options. Action Choose MENU by pressing the key directly below it (left soft key m). Illustration 1 Philips 18:00 REDIAL 08-08 MENU m : > • Go to a specific menu/ option 1. Press : key to scroll to your desired menu/option. • Confirm your selection 2.
SE635_IFU_EN.book Page 12 Monday, September 25, 2006 12:44 PM Connect EN The location of your base station can have an effect on the range and performance of your SE635 (see TIP below). Connecting the Base Station 1. Place the base station in a central location near the telephone line socket and electricity sockets. 2. Connect the line cord and the power cable to the proper connector at the back of the base station. 1. B A 2.
SE635_IFU_EN.book Page 13 Monday, September 25, 2006 12:44 PM Install EN Install battery Your SE635 is supplied with 2 rechargeable batteries allowing approximately up to 12 hours of talk-time and up to 150 hours stand-by time. Before using the handset, the batteries have to be installed and fully charged. 1. Slide out the battery cover. 2. Place the batteries as indicated and replace the cover. Charge battery 1. Place the handset on the charging cradle of the base station.
SE635_IFU_EN.book Page 14 Monday, September 25, 2006 12:44 PM Install EN Battery life and range Talk time and stand-by time When the battery is fully charged, the talk time of your SE635 is approximately 12 hours and the stand-by time is approximately 150 hours. Low battery warning The battery level is shown at the top left of the handset screen. When the battery level becomes low, the low battery sensor alerts you by sounding an audible tone and blinking the battery icon.
SE635_IFU_EN.book Page 15 Monday, September 25, 2006 12:44 PM Install EN Set date and time 1. Press mMENU. 2. Scroll : to Clock & Alarm and press mSELECT. 3. Press mSELECT to enter Set Date/Time. 4. Enter current time (HH:MM) and current date (DD/MM/YY) and press mSELECT. WARNING If your phone is connected to an ISDN line through an adaptor, the date & time may be updated after each call. The availability of date & time update is dependent on your network provider.
SE635_IFU_EN.book Page 16 Monday, September 25, 2006 12:44 PM Install EN Stand-by mode If the handset is idle for 30 seconds in settings mode, review mode, edit mode, etc. it will automatically return to stand-by mode. It will also return to stand-by mode automatically when the handset is placed back on the base station. Screen and keypad backlight The backlight remains on for 20 seconds after each activation such as an incoming call, key presses, lifting up the handset off the base station, etc.
SE635_IFU_EN.book Page 17 Monday, September 25, 2006 12:44 PM Install 7. EN Press 7 four times: Philips By default, the first letter of a word is in upper case. Press lower case.
SE635_IFU_EN.book Page 18 Monday, September 25, 2006 12:44 PM Call EN Make a call Predialling 1. Enter the phone number (maximum 24 digits). 2. Press r to dial the number. Direct dialling 1. Press r or v to take the line. 2. Enter the phone number. Call from redial list 1. Press > in stand-by mode. 2. Scroll : to an entry in the redial list. 3. Press r to dial the number. TIP The handset stores the last 20 numbers dialled. The last number dialled will appear first in the redial list.
SE635_IFU_EN.book Page 19 Monday, September 25, 2006 12:44 PM Call EN Answer a call When the phone rings, press r key. Handsfree answering When the phone rings, press v key. Incoming call has priority over other events. Whenever there is an incoming call, other status in progress such as phone setting, menu navigation, etc will be aborted. TIP If Auto Pick-up mode (see page 39) is activated, you can simply lift up the handset from its base station to answer the call.
SE635_IFU_EN.book Page 20 Monday, September 25, 2006 12:44 PM Call EN 2. Press v key again to return to normal mode. WARNING Activation of loudspeaker can suddenly increase the volume in the earpiece to a very high level. Make sure the handset is not too close to your ear. Adjust loudspeaker volume 1. Press : key to select from Volume 1 to Volume 5. Intercom This feature is only available when there are at least 2 registered handsets.
SE635_IFU_EN.book Page 21 Monday, September 25, 2006 12:44 PM Call EN Three-party conference call The conference call feature allows one external call to be shared with two handsets (in intercom). The three parties can share the conversation and no network subscription is required. 1. Press c to put the external call on hold (the caller can no longer hear you). 2. Intercom is established immediately if there are only 2 registered handsets.
SE635_IFU_EN.book Page 22 Monday, September 25, 2006 12:44 PM Phonebook EN Phonebook New Entry List Entry Edit Entry Delete Entry Delete All Direct Memory Copy from SIM Phbk transfer Your SE635 can store up to 250 phonebook memories, including 9 direct access memories (1 to 9). Each phonebook entry can have a maximum of 24 digits for the phone number and 12 characters for name. Access phonebook 1.
SE635_IFU_EN.book Page 23 Monday, September 25, 2006 12:44 PM Phonebook 5. EN : to choose a group (, , , ) and press mSELECT to confirm. Scroll A long confirmation beep tone is emitted. You can assign individual contacts to specific groups of your choice. For example, Group A contains phone numbers of all your co-workers. You can also assign a specific ring melody to that group (see "Group Melody" on page 37) .
SE635_IFU_EN.book Page 24 Monday, September 25, 2006 12:44 PM Phonebook EN Store direct access memory You can store up to 9 direct access memories (Key 1 to mode will automatically dial the stored phone number. 9). A long press on the keys in stand-by 1. Press mMENU, scroll press mSELECT. : to Phonebook and press mSELECT, scroll : to Direct Memory and 2. Select a key (Key 1 to Key 9) and press name will be displayed. 3.
SE635_IFU_EN.book Page 25 Monday, September 25, 2006 12:44 PM Phonebook 2. EN Slide the SIM card between the retaining clips, microchip facing up, until it stops. 3. Put the SIM card tray back in the slot on the base station and push into place until it latches. 4. On the handset, press mMENU, scroll from SIM and press mSELECT. 5. Scroll : to Copy All or Select Entry. If you choose Copy All then all entries in the SIM card will be copied to your phonebook.
SE635_IFU_EN.book Page 26 Monday, September 25, 2006 12:44 PM Call log EN The call log can store up to 50 entries. If you have subscribed to Caller Line Identification (CLI), and provided the identity of the caller is not withheld, the name (or number) of the caller will be displayed together with the date & time of the call (if provided by the network). The calls (missed and received) are displayed in chronological order with the most recent call at the top of the list.
SE635_IFU_EN.book Page 27 Monday, September 25, 2006 12:44 PM Call log EN View details of a redial list entry 1. Press > in stand-by mode and scroll : to select an entry. 2. Press mSELECT and press mSELECT again to View. Save redial list entry to phonebook 1. Press > in stand-by mode and scroll : to select an entry. 2. Press mSELECT, scroll : to Copy to Phbk and press mSELECT. 3. Enter name and press mOK. 4. Edit number if necessary and press mOK. 5.
SE635_IFU_EN.book Page 28 Monday, September 25, 2006 12:44 PM SMS EN SMS Write a SMS Inbox Draft box SMS Settings SMS stands for Short Message Service. To benefit from this service, you must subscribe to Caller Line Identification Service (CLI) together with SMS service from your network provider. SMS messages can be exchanged with a phone (mobile or compatible fixed lines), provided the receiver has also subscribed to CLI and SMS services.
SE635_IFU_EN.book Page 29 Monday, September 25, 2006 12:44 PM SMS EN 5. Enter the destination phone number and press mOK. Or press mPHBK to browse the phonebook list to select a phone number, press mSELECT and press mOK. 6. Enter the destination box number (0 to 9) directly and press mOK (only for UK). By default, the destination box is 9 (the default destination box depends on the country). 7. Press mSELECT to Send the message or scroll box and press mSELECT to confirm.
SE635_IFU_EN.book Page 30 Monday, September 25, 2006 12:44 PM SMS EN When viewing the message content, you can press mMENU to access the following options: 6. Reply Send a reply to the sender of the message. Edit Forward the message to another recipient. Copy to Phbk Save the sender’s number to your phonebook. Delete Delete the selected message. Delete All Delete all messages in the Inbox. 7. To return to SMS menu, press e.
SE635_IFU_EN.book Page 31 Monday, September 25, 2006 12:44 PM SMS EN Delete all Inbox messages 1. While viewing the message content, press mMENU to display the Inbox menu options. 2. Scroll : to Delete All and press mSELECT. 3. Press mSELECT again to confirm deletion. Draft box In addition to SMS messages saved as drafts, all the SMS messages that are not successfully sent will be automatically stored in the Draft box. The Draft box can store up to 10 messages. Review Draft messages 1.
SE635_IFU_EN.book Page 32 Monday, September 25, 2006 12:44 PM SMS EN 2. Scroll : to Delete and press mSELECT to confirm deletion. Delete all Draft messages 1. While viewing the message content, press mMENU to display the Draft box menu options. 2. Scroll : to Delete All and press mSELECT. 3. Press mSELECT again to confirm deletion. SMS settings This menu allows you to set up the server for sending and receiving SMS messages. Your SE635 can receive messages from 3 service centers.
SE635_IFU_EN.book Page 33 Monday, September 25, 2006 12:44 PM SMS 3. Enter box name (maximum 12 characters) and press mOK. 4. Enter a password (maximum 8 digits) and press mOK. 5. Enter the password again and press mOK. You can choose to leave the password empty. If no password is required, simply press when prompted to enter password. 6. EN mOK Enter the SMS box number and press mOK. If the confirmation password is correct, the new SMS box will be created.
SE635_IFU_EN.book Page 34 Monday, September 25, 2006 12:44 PM SMS EN 3. Enter the number and press mOK to confirm. A confirmation beep is emitted. The maximum length of an outgoing number is 24 digits. To set incoming number 1. Press mMENU, press mSELECT to enter SMS, scroll : to SMS Settings and press scroll : to SMS Center 1, SMS Center 2 or SMS Center 3 and press mSELECT. 2. Scroll : to Incoming Nr. and press mSELECT. 3. Enter the number and press mOK to confirm. A confirmation beep is emitted.
SE635_IFU_EN.book Page 35 Monday, September 25, 2006 12:44 PM Clock & Alarm EN Clock & Alarm Set Date/Time Alarm Alarm Tone Set date and time 1. Press mMENU, scroll : to Clock & Alarm and press mSELECT, press mSELECT again to enter Set Date/Time. 2. Enter the current time (HH:MM) and current date (DD/MM/YY) and press mSELECT. Enter the date in Day/Month/Year format and the time in 24-hour format. 3. A confirmation beep is emitted and the screen returns to Clock & Alarm menu.
SE635_IFU_EN.book Page 36 Monday, September 25, 2006 12:44 PM Personal Settings EN Personal Set Handset Tones Wallpaper Contrast Screensaver Handset Name Auto Pick-up Auto Hang-up Language Babysit Mode Handset Tones Ring Volume There are 5 ringer volume options (Silence, Low, Medium, High and Progressive). The default level is Medium. To set ring volume 1. Press mMENU, scroll : to Personal Set and press mSELECT, press mSELECT to enter Handset Tones and press mSELECT again to enter Ring Volume. 2.
SE635_IFU_EN.book Page 37 Monday, September 25, 2006 12:44 PM Personal Settings 3. EN Press mSELECT to set the ring melody. A confirmation beep is emitted and the screen returns to previous menu. Group Melody To benefit from this feature, you must subscribe to the Caller Line ldentification service. See "Caller Line Identification" on page 21.
SE635_IFU_EN.book Page 38 Monday, September 25, 2006 12:44 PM Personal Settings EN Wallpaper This feature allows you to select the wallpaper to be displayed in stand-by mode. There are 4 wallpapers pre-installed on your phone. Please see "Default settings" on page 17 for the default wallpaper. To set wallpaper mMENU, scroll : to Personal Set and press mSELECT, scroll : to Wallpaper and press mSELECT. 2. Scroll : to your desired wallpaper and press mSELECT to confirm. 1.
SE635_IFU_EN.book Page 39 Monday, September 25, 2006 12:44 PM Personal Settings 2. EN Edit the handset name and press mOK to confirm. A confirmation beep is emitted and the screen returns to previous menu. Maximum length of the handset name is 12 characters and the default handset name is PHILIPS. Auto Pick-up This function enables you to answer a call automatically by simply lifting the handset from the base station. By default, the Auto Pick-up feature is Off. To set Auto Pick-up mode 1.
SE635_IFU_EN.book Page 40 Monday, September 25, 2006 12:44 PM Personal Settings EN Babysit mode You must have at least 2 handsets registered to your base station to be able to use this feature (see page 44 "To register an additional handset"). This feature allows you to monitor, e.g. the baby’s room. Place the handset in the room to be monitored.
SE635_IFU_EN.book Page 41 Monday, September 25, 2006 12:44 PM Advanced Settings EN Advanced Set Recall Time Dial Mode Call Barring Baby call Registration Select Base Unregistration Change PIN Reset Auto prefix Country Conference Recall Time Recall time (or dial delay) is the time delay by which the line will be disconnected after you press r key. It can be set to short, medium or long.
SE635_IFU_EN.book Page 42 Monday, September 25, 2006 12:44 PM Advanced Settings EN Dial Mode The default value for dial mode that is preset in your SE635 should be the best suited for your country network and therefore you should not need to change it. There are 2 dial modes: Tone or Pulse. To set dial mode 1. Press mMENU, scroll mSELECT. : to Advanced Set and press mSELECT, scroll : to Dial Mode and press 2. Scroll : to Tone or Pulse and press mSELECT to confirm.
SE635_IFU_EN.book Page 43 Monday, September 25, 2006 12:44 PM Advanced Settings EN Baby Call When activated, the Baby Call feature enables you to dial a number by pressing any key on your handset. This feature is very useful for direct access to emergency services. You can enter up to 24 digits for baby call number.
SE635_IFU_EN.book Page 44 Monday, September 25, 2006 12:44 PM Advanced Settings EN Registration The procedures described below are the procedures that you will find in your SE635 handset. The procedures may vary according to the handset you want to register. In this case, please refer to the manufacturer of the additional handset. Additional handsets must be registered to the base unit before you can use them. Up to 5 handsets can be registered to one base station.
SE635_IFU_EN.book Page 45 Monday, September 25, 2006 12:44 PM Advanced Settings EN Unregistration To unregister a handset 1. Press mMENU, scroll press mSELECT. : to Advanced Set and press mSELECT, scroll : to Unregistration and 2. Enter the Master PIN when prompted and press mOK to confirm. 3. Press on the handset keypad the handset number corresponding to the handset that you wish to unregister.
SE635_IFU_EN.book Page 46 Monday, September 25, 2006 12:44 PM Advanced Settings EN Reset Reset to default settings mMENU, scroll : to Advanced Set and press mSELECT, scroll : to Reset and press mSELECT. 2. Enter the Master PIN when prompted and press mOK. 1. Press If your PIN number is the default 0000, step 2 is skipped. 3. Scroll : to Yes and press mSELECT. A confirmation beep is emitted, and the unit is reset to its default settings (please see "Default settings" on page 17).
SE635_IFU_EN.book Page 47 Monday, September 25, 2006 12:44 PM Advanced Settings 3. EN Scroll : to the country of your choice and press mSELECT to confirm. Once the country is selected, the default line settings for the selected country will be applied to the phone automatically (e.g. Recall time, Dial mode, Language, etc).
SE635_IFU_EN.book Page 48 Monday, September 25, 2006 12:44 PM Network Services EN Net. Service Call Forward Call Fwd Busy Call Fwd UnAns Voice Mail Call Back Cancel Call Bk Withhold ID This menu provides a convenient means for you to access, activate or deactivate some network services that are country/subscription dependent. Contact your network provider for more information about these services.
SE635_IFU_EN.book Page 49 Monday, September 25, 2006 12:44 PM Network Services 2. EN Scroll : to the type of call forwarding option you wish to set (Call Forward / Call Fwd Busy / Call Fwd UnAns) and press mSELECT. 3. Scroll : to Deactivate and press mSELECT to confirm. 4. The number string for that selected service will be dialled. 5. When the number has been dialled, press e to return to stand-by mode.
SE635_IFU_EN.book Page 50 Monday, September 25, 2006 12:44 PM Network Services EN 4. When the number has been dialled, press e to return to stand-by mode. Cancel Call Back Setting 1. Press mMENU, scroll press mSELECT. : to Net. Service and press mSELECT, scroll : to Cancel Call Bk and 2. Scroll : to Settings and press mSELECT. 3. Enter the required number for cancelling of call back and press mOK. Activate Cancel Call Back 1. Press mMENU, scroll press mSELECT. : to Net.
SE635_IFU_EN.book Page 51 Monday, September 25, 2006 12:44 PM Games EN Games Memory Tetris Memory The objective of this game is to find and match different pairs of graphics in the shortest possible time using your memory. To win, you have to complete matching all 8 pairs of graphics in a 4x4 matrix. To start the game 1. Press mMENU, scroll game. : to Games and press mSELECT, press mSELECT to enter Memory 2. An instruction screen is displayed.
SE635_IFU_EN.book Page 52 Monday, September 25, 2006 12:44 PM Telephone Answering Machine (TAM) EN Answer Machine Play Delete All Record Memo Answ. Mode Ans. On/Off Settings Voice Lang. Your SE635 features an answering machine that records unanswered calls when it is activated. The answering machine can store up to 99 messages within the maximum recording time of 30 minutes.
SE635_IFU_EN.book Page 53 Monday, September 25, 2006 12:44 PM Telephone Answering Machine (TAM) x Delete current message during message playback. p l r Play phone messages (the first recorded will be played first). LED Message counter No display: Indicates that the answering machine is switched off. EN Long press to delete all messages when TAM is in standby mode (unread messages will not be deleted). Stop message playback.
SE635_IFU_EN.book Page 54 Monday, September 25, 2006 12:44 PM Telephone Answering Machine (TAM) EN TIP You can also playback messages by pressing u key in stand-by mode, scroll Machine and press mSELECT, press mSELECT again to Play. : to Answer Playback of old messages via handset Old messages can only be played if there are no new messages. The first recorded message will be played first and the next message will be played automatically until there are no more messages.
SE635_IFU_EN.book Page 55 Monday, September 25, 2006 12:44 PM Telephone Answering Machine (TAM) 3. EN To change the answering mode, scroll : to your selection and press mSELECT. If you select Answer Only mode, the answering machine will only pick up an incoming call after a certain number of rings but will not record any message. Your correspondent will be prompted to call back later. Set Outgoing Messages (OGM) 1.
SE635_IFU_EN.book Page 56 Monday, September 25, 2006 12:44 PM Telephone Answering Machine (TAM) EN Answer On/Off Turn answering machine On/Off 1. Press mMENU, scroll press mSELECT. : to Answer Machine and press mSELECT, scroll : to Ans. On/Off and 2. Scroll : to On or Off and press mSELECT to confirm. Answering Machine settings 1. Press mMENU, scroll : to Answer Machine and press mSELECT, scroll : to Settings and press mSELECT.
SE635_IFU_EN.book Page 57 Monday, September 25, 2006 12:44 PM Telephone Answering Machine (TAM) 3. EN Scroll : to Activated or Deactivated and press mSELECT to confirm. Remote access code is to prevent unauthorised access of the answering machine from external callers. The remote access code is the same as the Master PIN of the phone. Controlling the answering machine from an external call 1. From your external phone, dial home. The answering machine answers and starts playing your greeting message.
SE635_IFU_EN.book Page 58 Monday, September 25, 2006 12:44 PM Telephone Answering Machine (TAM) EN Set Base Call Screening 1. Press mMENU, scroll : to Answer Machine and press mSELECT, scroll : to Settings and press mSELECT, scroll : to Base Screening and press mSELECT. 2. The last selected option is highlighted. 3. Scroll : to On or Off and press mSELECT to confirm. By default, the call screening on base unit is activated and call screening on handset is deactivated.
SE635_IFU_EN.book Page 59 Monday, September 25, 2006 12:44 PM Troubleshooting EN Troubleshooting of the phone Problem Causes Solution The icon is not blinking when the handset is placed on the base • Bad battery contact • Move the handset slightly • Dirty contact • Clean the battery contact with a cloth moistened with alcohol • Battery is full • No need to charge • No power • Check the connections.
SE635_IFU_EN.
SE635_IFU_EN.book Page 61 Monday, September 25, 2006 12:44 PM Troubleshooting EN Troubleshooting of the Answering Machine Problem Causes Solution The answering machine does not record messages • Memory is full • Delete old messages • The ANSWER ONLY mode has been activated • Activate Answ.
SE635_IFU_EN.book Page 62 Monday, September 25, 2006 12:44 PM Information EN Electric, Magnetic and Electromagnetic Fields ("EMF") 1. Philips Royal Electronics manufactures and sells many consumer oriented products which usually, as with any electronic apparatus, have the ability to emit and receive electro magnetic signals. 2.
SE635_IFU_EN.
3% ?)&5?%. BOOK 0AGE &RIDAY $ECEMBER 0- 3PECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE 4RADEMARKS ARE THE PROPERTY OF +ONINKLIJKE 0HILIPS %LECTRONICS . 6 OR THEIR RESPECTIVE OWNERS ¥ +ONINKLIJKE 0HILIPS %LECTRONICS .
