3% ?)&5?%. BOOK 0AGE &RIDAY $ECEMBER 0- %.
ΣΕ435_ΙΦΥ_ΕΝ.
Contents 4 4 4 4 5 6 6 9 10 12 13 18 22 26 28 35 36 40 46 49 56 59 60 EN Important Information For your safety Installation requirements Need Help? What’s in the box? Your SE435 Overview of the handset Overview of the base station Main features of your SE435 Connect Install Call Phonebook Call log SMS Clock & Alarm Personal Settings Advanced Settings Network Services Telephone answering machine (TAM) Troubleshooting Information Index 3
Important Information EN For your safety This equipment is not designed to make emergency calls in the event of a power failure. Alternative arrangements should be made for access to emergency calls. To avoid damage or malfunction: - Do not allow the product to come into contact with liquid. Do not open it as you could be exposed to high voltages. Never use any battery type other than the one supplied. Do not expose the phone to excessive heat caused by heating equipment or direct sunlight.
What’s in the box? EN The following accessories are included with your SE435: Handset Base station 2 AAA rechargeable batteries Battery door Power supply for base station User Guide Quick Start Guide Line cord Warranty card The line adaptor may not be attached to the line cord. In this case, you have to connect the line adaptor to the line cord first before plugging the line cord to the line socket.
Your SE435 EN Overview of the handset Earpiece Up/Down Navigation keys LCD Screen Event LED Menu key/Left Soft key Right soft key/ Redial list key/ Mute key Talk key Hang-up key Alphanumeric keypad Case key/ Pause key/ Ringer off key Keypad lock key .
Your SE435 EN Handset keys Press To m Enter the main menu from stand-by mode. Select the function displayed on the handset screen directly above it. > Go to redial list from stand-by mode. Select the function displayed on the handset screen directly above it. Activate mute function during a call. r Answer an incoming external or internal call. Insert R for operator services when on the line. e Hang up a call.
Your SE435 EN Display icons & symbols In stand-by mode, several icons & symbols may be displayed on the handset. The handset is registered and within range of the base station. It blinks when the handset is out of range or is searching for a base. Battery symbol indicating 3 different battery levels. The ringer volume is set to zero. There is an external or internal incoming call, a call is connected or a call is held. When browsing phonebook list. The loudspeaker is ON.
Your SE435 EN Overview of the base station Volume keys Next message key Delete key Paging key SIM card tray Previous message/ Replay message key Answer Machine Play/ Stop key On/Off key Base station keys c o v x p l r Page handset. Long press to start registration procedure. Long press to turn the telephone answering machine (TAM) On/Off. Increase speaker volume during message playback. Reduce speaker volume during message playback. Delete current message during message playback.
Your SE435 EN LED Message counter No display: Indicates that the answering machine is switched off. Blinking: Indicates number of new messages. Steady: Indicates number of old messages. 2 bars flashing: Indicates that there is no more memory left. Indicates the volume level (L0 - L9) when v is pressed. Indicates the current message number during playback. Main features of your SE435 The following is an overview of the menu options that are available in your SE435.
Your SE435 EN Menu navigation The basic steps of navigating through the menus and options are as follows: Task • Enter main menu/menu options Action Illustration Press m key 1 PHILIPS 18:00 08-08 m : > • Go to a specific menu/option 1) Press : key to scroll to your desired menu/option • Confirm your selection 2) Select OK by pressing the key Main Menu Clock & Alarm directly below it (left soft key m) m : > 2 1 In this example, the alarm is Off. • To change your selection.
Connect EN The position in which you placed the base station can have an effect on the range and performance of your SE435. Connecting the Base Station 1. Place the base station in a central location near the telephone line socket and electricity sockets. 2. Connect the line cord and the power cable to the proper connector at the back of the base station. 1. B A 2. Connect the power supply A Connect the line cord to the line socket B 3.
Install EN Install battery Your SE435 is supplied with 2 rechargeable batteries allowing approximately up to 12 hours of talk-time and up to 150 hours stand-by time. Before using the handset, the batteries have to be installed and fully charged. 1. Slide out the battery cover. 2. Place the batteries as indicated and replace the cover. Charge battery 1. Place the handset on the charging cradle of the base station. A beep is emitted if the handset is placed correctly. 2.
Install EN Battery life and range Talk time and stand-by time When the battery is fully charged, the talk time of your SE435 is approximately 12 hours and the stand-by time is approximately 150 hours. Low battery warning The battery level is shown at the top left of the handset screen. When the battery level becomes low, the low battery sensor alerts you by sounding an audible tone and blinking the battery icon.
Install EN Set date and time 1. Press m. 2. Scroll : to Clock & Alarm and press OK. 3. Press OK to select Set Date/Time. 4. Enter current time (HH:MM) and current date (DD/MM/YY) and press OK. WARNING If your phone is connected to an ISDN line through an adaptor, the date & time may be updated after each call. The availability of date & time update is dependent on your network provider. Please check the date & time settings in your ISDN system or contact your network. provider.
Install EN Stand-by mode If the handset is idle for 30 seconds in settings mode, review mode, edit mode, etc. it will automatically return to stand-by mode. It will also return to stand-by mode automatically when the handset is placed back on the base station. Screen and keypad backlight The LCD backlight remains on for 20 seconds after each activation such as an incoming call, key presses, lifting up the handset off the base station, etc. The color of the LCD backlight is AMBER.
Install 6. Press 7 once: Philip 7. Press 7 four times: Philips By default, the first letter of a word is in upper case. Press lower case. EN # to switch between upper and Default settings Ringer Volume Medium Earpiece Volume Volume 3 Speaker Volume Volume 3 Key Beep On Auto pick-up Off Auto hang-up On Babysit mode Off Alarm clock Off Barring mode Off SMS reception On Master PIN 0000 Answering Machine Answer Mode Answ. & Rec.
Call EN Make a call Predialling 1. Enter the phone number (maximum 24 digits). 2. Press r key to dial the number. Direct dialling 1. Press r or v key to take the line. 2. Enter the phone number. Call from redial list 1. Press > key in stand-by mode. 2. Scroll : to an entry in the redial list. 3. Press r key to dial the number. TIP The handset stores the last 10 numbers dialled. The last number dialled will appear first in the redial list.
Call EN Answer a call When the phone rings, press r key. Handsfree answering When the phone rings, press v key. Incoming call has priority over other events. Whenever there is an incoming call, other status in progress such as phone setting, menu navigation, etc. will be aborted. TIP If Auto Pick-up mode (see page 38) is activated, you can simply lift up the handset from its base station to answer the call. This feature is deactivated by default.
Call EN 2. Press v key again to return to normal mode. WARNING Activation of loudspeaker can suddenly increase the volume in the earpiece to a very high level. Make sure the handset is not too close to your ear. Adjust loudspeaker volume 1. Press : key to select from Volume 1 to Volume 5. Intercom This feature is only available when there are at least 2 registered handsets. It allows you to make free internal calls, transfer external calls from one handset to another and use the conference option.
Call EN Three-party conference call The conference call feature allows one external call to be shared with two handsets (in intercom). The three parties can share the conversation and no network subscription is required. 1. Press c to put the external call on hold (the caller can no longer hear you). 2. Intercom is established immediately if there are only 2 registered handsets.
Phonebook EN Phonebook New Entry List Entry Edit Entry Delete Entry Delete All Direct Memory Copy from SIM Phbk Transfer Your SE435 can store up to 250 phonebook memories, including 9 direct access memories (1 to 9). Each phonebook entry can have a maximum of 24 digits for the phone number and 12 characters for the name. Access phonebook 1. Press d in stand-by mode or press m, scroll : to Phonebook and press OK, scroll and press OK. 2. The phonebook entries will be listed in alphabetical order. 3.
Phonebook 5. EN Scroll : to a group (, , , ) and press OK to confirm. A long confirmation beep tone is emitted. You can assign individual contacts to specific groups of your choice. For example, Group A contains phone numbers of all your co-workers. You can also assign a specific ring melody to that group (see "Group Melody" on page 37).
Phonebook EN Store direct access memory You can store up to 9 direct access memories (Key 1 to mode will automatically dial the stored phone number. 9). A long press on the keys in stand-by 1. Press m, scroll : to Phonebook and press OK, scroll : to Direct Memory and press OK. 2. Select a key (Key 1 to Key 9) and press OK. If there is a stored number in that key, the number/name will be displayed. 3.
Phonebook 2. EN Slide the SIM card between the retaining clips, microchip facing up, until it stops. 3. Put the SIM card tray back in the slot on the base station and push into place until it latches. 4. On the handset, press press OK. 5. Scroll : to Copy All or Select Entry. If you choose Copy All then all entries in the SIM card will be copied to your phonebook. If you choose Select Entry, you can browse the SIM card entries and select the ones you wish to copy.
Call log EN The call log can store up to 50 entries. If you have subscribed to Caller Line Identification (CLI), and provided the identity of the caller is not withheld, the name (or number) of the caller will be displayed together with the date & time of the call (if provided by the network). The calls (missed and received) are displayed in chronological order with the most recent call at the top of the list. When the call log is empty, the screen displays List Empty. Access call log 1.
Call log EN Save redial list entry to phonebook 1. Press > key in stand-by mode and scroll : to select an entry. 2. Press m and scroll : to Copy to Phbk and press OK. 3. Enter name and press OK. 4. Edit number if necessary and press OK. 5. Edit the SMS Box number and press OK (only for UK). Default SMS Box is 9. To modify, press BACK and then enter the number (0 to 9). 6. Scroll : to select a group (, , , ) and press OK to complete.
SMS EN SMS Write a SMS Inbox Draft Box SMS Settings SMS stands for Short Message Service. To benefit from this service, you must subscribe to Caller Line Identification Service (CLI) together with SMS service from your network provider. SMS messages can be exchanged with a phone (mobile or compatible fixed lines), provided the receiver has also subscribed to CLI and SMS services. The factory settings on your SE435 correspond to the main national operator.
SMS EN 5. Enter the destination phone number and press OK or press d to browse : the phonebook list to select a phone number and press OK. 6. Enter the destination box number directly or scroll : to the desired box number (Box 0 to Box 9) and press OK (only for UK). By default, the destination box is 9 (the default destination box depends on the country). : to Save as Draft to save the message in the Draft Box and 7. Press OK to send the message or scroll press OK. 8.
SMS EN 5. Press OK to view the message content. TIP While reading an SMS, press : to scroll to the next or previous row, or press > to view the sender’s number and the date and time of reception. When viewing the message content, you can press m to access the following options: 6.
SMS 5. EN Edit the SMS Box number and press OK (only for UK). The default SMS Box is 9. To modify, press BACK and then enter the number (0 to 9). 6. Scroll : to select a group you wish to assign for this contact. 7. Press OK to confirm. A long confirmation beep is emitted and the screen returns to display the message content. Delete an Inbox message 1. While viewing the message content, press m to display the Inbox menu options. 2. Scroll : to Delete and press OK to confirm deletion.
SMS EN 4. If you select Send, the message will be sent immediately. SMS Sent! will be displayed if the message has been sent successfully. Edit a Draft message 1. While viewing the message content, press m to display the Draft Box menu options. 2. Scroll : to Edit and press OK to start editing. 3. After editing, press OK to confirm the message. 4.
SMS EN SMS Box (only for UK) In order to send and receive SMS messages, there must at least be 1 SMS Box created. Box 9 with empty password is created by default. You can create a maximum of 10 SMS boxes (Box 0 to Box 9), and you can protect each box with a password. To create a new SMS Box (only for UK) 1. Press m, press OK to select SMS, scroll : to SMS Settings and press OK, scroll : to select SMS Boxes and press OK. 2. Press OK to select Add New Box. 3.
SMS EN 2. Scroll : to the SMS box for which you wish to change the box number and press OK. 3. Scroll : to Change Box Nr and press OK. 4. Enter the new box number and press OK to confirm box number change. To set outgoing number The incoming and outgoing numbers of your SE435 are already set to work on your country network. We advise you not to modify these settings. For more details or in case of any problems, please contact your local network provider. 1.
Clock & Alarm EN Clock & Alarm Set Date/Time Alarm Alarm Tone Set date and time 1. Press m, scroll : to Clock & Alarm and press OK, press OK again to select Set Date/Time. 2. Enter current time (HH:MM) and current date (DD/MM/YY) and press OK. Enter the date in Day/Month/Year format and the time in 24-hour format. 3. A confirmation beep is emitted and the screen returns to previous menu.
Personal Settings EN Personal Set Handset Tones Handset Name Auto Pick-up Auto Hang-up Language Babysit mode Backlight Handset Tones Ring Volume There are 5 ringer volume options (Silence, Low, Medium, High and Progressive). The default level is Medium. To set ring volume 1. Press m, scroll : to Personal Set and press OK, press OK to select Handset Tones and press OK to select Ring Volume. 2. Scroll : to your desired volume level and press OK to confirm.
Personal Settings EN Group Melody To benefit from this feature, you must subscribe to Caller Line ldentification service. See "Caller Line Identification" on page 21. This menu enables you to select and set the melodies to be played when there is an external incoming call from a contact whose name is stored in your phonebook and is part of a group. You can associate 1 ring melody to each group. There are three phonebook groups (Group A, B, C) available for you to organize your contacts.
Personal Settings EN Handset Name You can name the handset and display the handset name in stand-by mode. The default handset name of your handset is PHILIPS. To rename the handset 1. Press m, scroll : to Personal Set and press OK, scroll : to Handset Name and press OK. 2. Edit the handset name and press OK to confirm. A confirmation beep is emitted and the screen returns to previous menu. Maximum length of the handset name is 12 characters.
Personal Settings EN Babysit mode You must have at least 2 handsets registered to your base station to be able to use this feature (see page 43 "To register an additional handset" ). This feature allows you to monitor e.g. the baby’s room. Place the handset in the room to be monitored. If the sound level around the microphone of the handset exceeds a certain threshold, the handset can automatically call another handset registered on the same base station.
Advanced Settings EN Advanced Set Recall Time Dial Mode Call Barring Baby call Registration Unregister Change PIN Reset Auto prefix Country Confer. mode Recall Time Recall time (or dial delay) is the time delay by which the line will be disconnected after you press can be set to short, medium or long. r key. It The default value of recall time that is preset in your SE435 should be the best suited for your country network and therefore you should not need to change it. To set recall time 1.
Advanced Settings EN To set dial mode 1. Press m, scroll : to Advanced Set and press OK, scroll : to Dial Mode and press OK. 2. Scroll : to Tone or Pulse and press OK to confirm. A confirmation beep is emitted and the screen returns to previous menu. Call Barring Call barring enables you to restrict selected handsets from dialling a phone number beginning with certain numbers. You can set up to four different barring numbers, with each number containing up to 4 digits.
Advanced Settings EN Baby Call When activated, the Baby Call feature enables you to dial a number by pressing any key on your handset. This feature is very useful for direct access to emergency services. You can enter up to 24 digits for baby call number. If you have modified the Master PIN before and it is not the default 0000, you will be required to enter the Master PIN before you can activate or deactivate Baby Call mode or change Baby Call number. To activate Baby Call mode 1.
Advanced Settings EN Registration The procedures described below are the procedures that you will find in your SE435 handset. The procedures may vary according to the handset you want to register. In this case, please refer to the manufacturer of the additional handset. Additional handsets must be registered to the base unit before you can use them. Up to 5 handsets can be registered to one base station. The Master PIN is required before you can register or unregister handsets. The default PIN is 0000.
Advanced Settings EN Change Master PIN The Master PIN is used for setting call barring/baby call number and for registration/unregistration of handsets. The default Master PIN is 0000. The length of the PIN is 4 digits. This PIN is also used to protect the settings of your handset. Your handset will prompt you whenever the PIN is required. To change Master PIN 1. Press m, scroll : to Advanced Set and press OK, scroll : to Change PIN and press OK. 2.
Advanced Settings EN Auto Prefix The maximum length of an auto prefix number is 5 digits. Once the number is set, it will be automatically inserted at the beginning of each number that will be dialled. To set auto prefix number 1. Press m, scroll : to Advanced Set and press OK, scroll : to Auto prefix and press OK. 2. The last stored auto prefix number is displayed (if any). 3. Enter the number and press OK to confirm. A confirmation beep is emitted and the screen returns to previous menu.
Network Services EN Net. Service Call Forward Call Fwd Busy CallFwd UnAns Voice Mail Call Back Cancel CallBk Withhold ID This menu provides a convenient means for you to access, activate or deactivate some network services that are subscription dependent. Contact your network provider for more information about these services. The default numbers and values that are preset in your SE435 should be the best suited for your country network and therefore you should not need to change them.
Network Services EN Deactivate Call Forward 1. Press m, scroll : to Net. Service and press OK. 2. Scroll : to the type of call forwarding option you wish to deactivate (Call Forward / Call Fwd Busy / CallFwd UnAns) and press OK. 3. Scroll : to Deactivate and press OK to confirm. 4. The number string for that selected service will be dialled. 5. When the number has been dialled, presse to return to stand-by mode.
Network Services EN Cancel Call Back Setting 1. Press m , scroll : to Net. Service and press OK, scroll : to Cancel CallBk and press OK. 2. Scroll : to Settings and press OK. 3. Enter the required number for cancelling of call back and press OK. Activate Cancel Call Back 1. Press m, scroll : to Net. Service and press OK, scroll : to Cancel CallBk and press OK. 2. Press OK to select Activate. 3. The number string for that selected service will be dialled. 4.
Telephone answering machine (TAM) EN Answ. Machine Play Delete All Record Memo Answ. Mode Ans. On/Off Settings Voice Lang. Your SE435 features an answering machine that records unanswered calls when it is activated. The answering machine can store up to 99 messages within the maximum recording time of 15 minutes.
Telephone answering machine (TAM) EN x p l r LED Message counter Delete current message during message playback. Long press to delete all messages when the answering machine is in standby mode (unread messages will not be deleted). Play phone messages (the first recorded will be played first). Go to previous message if pressed within 1 second of current message playback. Replay current message if pressed after 1 second of current message playback. Skip to the next message during message playback.
Telephone answering machine (TAM) EN Playback of old messages via handset Old messages can only be played if there are no new messages. The first recorded message will be played first and the next message will be played automatically until there are no more messages. 1. Press m, scroll : to Answ. Machine and press OK, press OK to select Play. 2. Press OK, the first recorded message will start to play until the last recorded message.
Telephone answering machine (TAM) EN Set Outgoing Messages (OGM) 1. Once the answering mode is set, you can choose to set your outgoing message as Predefined or Personalised. 2. The current selected mode is ticked. To change it, scroll : to your selection and press OK to confirm. Predefined Outgoing Messages 3. 1. If you set your OGM as Predefined, you can press OK to play the OGM. 2. The predefined OGM will be played and the screen will return to previous menu once it has finished playing.
Telephone answering machine (TAM) EN Answering Machine settings 1. Press m, scroll : to Answ. Machine and press OK, scroll : to Settings and press OK. Ring Delay This is the number of rings before the answering machine answers and starts playing your greeting message. You can set the answering machine to answer after 3 - 8 rings or Toll Saver. The default ring delay is 4. 1. Press m, scroll : to Answ. Machine and press OK, scroll : to Settings and press OK, press OK to select Ring Delay. 2.
Telephone answering machine (TAM) EN 3. If the access code is correct, a long beep tone can be heard. If there are new messages, all the new messages will be played immediately and then stop when there are no more new messages. If there are no new messages, the answering machine will not play any messages. The following table indicates how to access the below features during remote access procedure: 1 Replay current message or go to previous message. 2 Play old messages or stop them.
Telephone answering machine (TAM) EN Voice Language This menu allows you to change the language of the predefined OGM. The availability of this menu and the language options available are country dependent. To set voice language m, scroll : to Answ. Machine and press OK, scroll : to Voice Lang. and press OK. 1. Press 2. The current selected language is ticked. 3. Scroll : to your preferred language and press OK to confirm. A confirmation beep is emitted and the screen returns to previous menu.
Troubleshooting EN Troubleshooting of the phone Problem Causes Solution The icon is not blinking when the handset is placed on the base • Bad battery contact • Move the handset slightly • Dirty contact • Clean the battery contact with a cloth moistened with alcohol • Battery is full • No need to charge • No power • Check the connections.
Troubleshooting EN Problem Causes Solution The handset displays “not available” • The procedure to add a handset has failed • Try again by disconnecting and connecting the base station power supply and follow the procedure to register a handset (see page 43) • Remove and place back the handset batteries • when attempting to add another handset to the base station • Maximum number of handsets (5) has been reached • Unregister a handset so as to register the new handset • when using a handset • Ba
Troubleshooting EN Troubleshooting of the Answering Machine Problem Causes Solution The answering machine does not record messages • Memory is full • Delete old messages • The ANSWER ONLY mode has been activated • Activate Answer & Rec.
Information EN Electric, Magnetic and Electromagnetic Fields ("EMF") 1. 2. 3. 4. 5. Philips Royal Electronics manufactures and sells many consumer oriented products which usually, as with any electronic apparatus, have the ability to emit and receive electro magnetic signals.
Index EN A Accessories 5 Advanced Settings 40 Alarm 35 Alarm tone 35 Answ.
3% ?)&5?%. BOOK 0AGE &RIDAY $ECEMBER 0- 3PECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE 4RADEMARKS ARE THE PROPERTY OF +ONINKLIJKE 0HILIPS %LECTRONICS . 6 OR THEIR RESPECTIVE OWNERS ¥ +ONINKLIJKE 0HILIPS %LECTRONICS .
